bug-ddd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ddd 3.6 & 3.7 unresponsive after a dialog is opened (Mandrake Linux 9.2)


From: Ken Cecka
Subject: ddd 3.6 & 3.7 unresponsive after a dialog is opened (Mandrake Linux 9.2)
Date: Wed, 05 Nov 2003 09:14:29 -0800
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.4) Gecko/20030630

Please see the attached emails for a description of the bug and a log.

$ ddd --configuration
GNU DDD 3.3.6 (i586-mandrake-linux-gnu)
Copyright (C) 1995-1999 Technische Universität Braunschweig, Germany.
Copyright (C) 1999-2001 Universität Passau, Germany.
Copyright (C) 2001 Universität des Saarlandes, Germany.

Compiled with GCC 3.3 (Mandrake Linux 9.2 3.3-1mdk), GNU libc 2.3
Requires X11R6, Xt11R6, Motif 2.1 (GNU/LessTif Version 2.1 Release 0.93.41)
Includes XPM 3.4.11, Athena Panner (7000002L), DDD core
Built 2003-06-20 by goetz <address@hidden>.

$ gdb --version
GNU gdb 5.3-25mdk (Mandrake Linux)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i586-mandrake-linux-gnu".

$ gcc --version
gcc (GCC) 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.


-----------------------------------------------------------------------
DISCLAIMER:  Information contained in this message and/or
attachment(s) may contain confidential information of Zetec, Inc.
If you have received this transmission in error, please notify
the sender by return email.
-----------------------------------------------------------------------
GNU DDD 3.3.6 (i586-mandrake-linux-gnu)
Copyright (C) 1995-1999 Technische Universität Braunschweig, Germany.
Copyright (C) 1999-2001 Universität Passau, Germany.
Copyright (C) 2001 Universität des Saarlandes, Germany.

Compiled with GCC 3.3 (Mandrake Linux 9.2 3.3-1mdk), GNU libc 2.3
Requires X11R6, Xt11R6, Motif 2.1 (GNU/LessTif Version 2.1 Release 0.93.41)
Includes XPM 3.4.11, Athena Panner (7000002L), DDD core
Built 2003-06-20 by goetz <address@hidden>.
$  ddd
+  /bin/sh -c 'exec gdb -q -fullname'
#  Hello, world!
#  Opening session "110a0d019e000106805233000000068290384"...
#  Enabling core dumps...
#  Enabling core dumps...done.
#  Running GDB (pid 20414, tty /dev/pts/4)...
#  Current language: C/C++
#  Searching "vsllib/ddd.vsl"...
#  Trying "/home/ken/.ddd/vsllib/ddd.vsl"
#  Trying "/usr/share/ddd-3.3.6/vsllib/ddd.vsl"
#  Searching "vsllib/ddd.vsl"..."/usr/share/ddd-3.3.6/vsllib/ddd.vsl".
<- "(gdb) "
-> "set prompt (gdb) \n"
#  Creating "/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/"...
#  Creating 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/"...done.
#  Copying "/home/ken/.ddd/init" to 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/init"...
#  Copying "/home/ken/.ddd/init" to 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/init"...done.
#  Copying "/home/ken/.ddd/history" to 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/history"...
#  Copying "/home/ken/.ddd/history" to 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/history"...done.
#  Saving session in 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/init"...
#  Saving session in 
"/home/ken/.ddd/sessions/110a0d019e000106805233000000068290384/init"...done.
<- "(gdb) "
-> "set height 0\n"
<- "(gdb) "
-> "set width 0\n"
<- "(gdb) "
-> "set annotate 1\n"
<- "(gdb) "
-> " set verbose off\n"
<- "(gdb) "
-> "info line\n"
<- "No line number information available.\n"
   "(gdb) "
-> "list\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info line\n"
<- "No line number information available.\n"
   "(gdb) "
-> "output 4711\n"
<- "4711(gdb) "
-> "show language\n"
<- "The current source language is \"auto; currently c\".\n"
   "(gdb) "
-> "show version\n"
<- "GNU gdb 5.3-25mdk (Mandrake Linux)\n"
   "Copyright 2002 Free Software Foundation, Inc.\n"
   "GDB is free software, covered by the GNU General Public License, and you 
are\n"
   "welcome to change it and/or distribute copies of it under certain 
conditions.\n"
   "Type \"show copying\" to see the conditions.\n"
   "There is absolutely no warranty for GDB.  Type \"show warranty\" for 
details.\n"
   "This GDB was configured as \"i586-mandrake-linux-gnu\".\n"
   "(gdb) "
-> "pwd\n"
<- "Working directory /home/ken/rpm.\n"
   "(gdb) "
-> "info breakpoints\n"
<- "No breakpoints or watchpoints.\n"
   "(gdb) "
-> "show history filename\n"
<- "The filename in which to record the command history is 
\"/home/ken/rpm/.gdb_history\".\n"
   "(gdb) "
-> "show history size\n"
<- "The size of the command history is 1000.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info sources\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info line main\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line MAIN\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info files\n"
<- "(gdb) "
-> "info line main_\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info program\n"
<- "The program being debugged is not being run.\n"
   "(gdb) "
-> "info line MAIN_\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line main__\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line MAIN__\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line _main\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line _MAIN\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line __main\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line __MAIN\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line my_main\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line the_main\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line vxworks_main\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info line main_vxworks\n"
<- "No symbol table is loaded.  Use the \"file\" command.\n"
   "(gdb) "
-> "set confirm off\n"
<- "(gdb) "
-> "source /home/ken/tmp/ddd4R9XBs\n"
<- "(gdb) "
-> "info breakpoints\n"
<- "No breakpoints or watchpoints.\n"
   "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "# reset\n"
<- "(gdb) "
-> "info breakpoints\n"
<- "No breakpoints or watchpoints.\n"
   "(gdb) "
-> "display\n"
<- "(gdb) "
-> "info display\n"
<- "There are no auto-display expressions now.\n"
   "(gdb) "
-> "set environment TERM dumb\n"
<- "(gdb) "
-> "info source\n"
<- "No current source file.\n"
   "(gdb) "
-> "info files\n"
<- "(gdb) "
-> "info program\n"
<- "The program being debugged is not being run.\n"
   "(gdb) "
-> "help detach\n"
<- "Detach a process or file previously attached.\n"
   "If a process, it is no longer traced, and it continues its execution.  If\n"
   "you were debugging a file, the file is closed and gdb no longer accesses 
it.\n"
   "(gdb) "
#  Opening session "110a0d019e000106805233000000068290384"...done.
#  Welcome to DDD 3.3.6 "Rusty" (i586-mandrake-linux-gnu)
-> "help run\n"
<- "Start debugged program.  You may specify arguments to give it.\n"
   "Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n"
   "Input and output redirection with \">\", \"<\", or \">>\" are also 
allowed.\n"
   "\n"
   "With no arguments, uses arguments last specified (with \"run\" or \"set 
args\").\n"
   "To cancel previous arguments and run with no arguments,\n"
   "use \"set args\" without arguments.\n"
   "(gdb) "
-> "help step\n"
<- "Step program until it reaches a different source line.\n"
   "Argument N means do this N times (or till program stops for another 
reason).\n"
   "(gdb) "
-> "help stepi\n"
<- "Step one instruction exactly.\n"
   "Argument N means do this N times (or till program stops for another 
reason).\n"
   "(gdb) "
-> "help next\n"
<- "Step program, proceeding through subroutine calls.\n"
   "Like the \"step\" command as long as subroutine calls do not happen;\n"
   "when they do, the call is treated as one instruction.\n"
   "Argument N means do this N times (or till program stops for another 
reason).\n"
   "(gdb) "
-> "help nexti\n"
<- "Step one instruction, but proceed through subroutine calls.\n"
   "Argument N means do this N times (or till program stops for another 
reason).\n"
   "(gdb) "
-> "help until\n"
<- "Execute until the program reaches a source line greater than the current\n"
   "or a specified line or address or function (same args as break command).\n"
   "Execution will also stop upon exit from the current stack frame.\n"
   "(gdb) "
-> "help finish\n"
<- "Execute until selected stack frame returns.\n"
   "Upon return, the value returned is printed and put in the value history.\n"
   "(gdb) "
-> "help cont\n"
<- "Continue program being debugged, after signal or breakpoint.\n"
   "If proceeding from breakpoint, a number N may be used as an argument,\n"
   "which means to set the ignore count of that breakpoint to N - 1 (so that\n"
   "the breakpoint won\'t break until the Nth time it is reached).\n"
   "(gdb) "
-> "help signal\n"
<- "Continue program giving it signal specified by the argument.\n"
   "An argument of \"0\" means continue program without giving it a signal.\n"
   "(gdb) "
-> "help kill\n"
<- "Kill execution of program being debugged.\n"
   "(gdb) "
-> "help up\n"
<- "Select and print stack frame that called this one.\n"
   "An argument says how many frames up to go.\n"
   "(gdb) "
-> "help down\n"
<- "Select and print stack frame called by this one.\n"
   "An argument says how many frames down to go.\n"
   "(gdb) "
-> "quit\n"
#  Running GDB (pid 20414, tty /dev/pts/4)...Exit 0.
#  Saving options in "/home/ken/.ddd/init"...
#  Saving options in "/home/ken/.ddd/init"...done.
#  Deleting session "110a0d019e000106805233000000068290384"...
#  Current session is [none].
#  Deleting session "110a0d019e000106805233000000068290384"...done.
#  Saving history in "/home/ken/.ddd/history"...
#  Saving history in "/home/ken/.ddd/history"...done.
#  Thanks for using DDD 3.3.6!
--- Begin Message --- Subject: Re: ddd on Mandrake 9.2 Date: Wed, 05 Nov 2003 08:55:12 -0800 User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.4) Gecko/20030630 Actually, it looks like it becomes unresponsive as soon as another window is opened. For example, when the toolbar opens, the main window stops responding. If I select the option that causes the tool buttons to be displayed in the main window, everything is ok until I try to attach to a process, after which the main window becomes unresponsive.

Ken

Ken Cecka wrote:

Götz,

I recently upgraded to Mandrake 9.2, and have been having a hard time getting ddd to work correctly. The symptom is, I start ddd, I close the message of the day window, and ddd is unresponsive - it refreshes correctly if I drag a window over the top of it, but I can't click any menu items or type in any commands. I found that if I disable the message of the day window, the problem goes away, so I am now able to work, but I wanted to let you know about the problem. I tried comping ddd 3.3.7 from source and it had the same problem; I was unable to build ddd 3.3.8, so the problem may be resolved there. Thanks for providing the package!

Ken

$ rpm -qi ddd
Name : ddd Relocations: (not relocateable)
Version     : 3.3.6                             Vendor: MandrakeSoft
Release : 2mdk Build Date: Fri 20 Jun 2003 01:21:55 AM PDT Install Date: Wed 05 Nov 2003 08:31:34 AM PST Build Host: klama.mandrake.org Group : Development/Other Source RPM: ddd-3.3.6-2mdk.src.rpm
Size        : 8316901                          License: GPL
Signature   : (none)
Packager    : Götz Waschk <address@hidden>
URL         : http://www.gnu.org/software/ddd/
Summary     : A GUI for several command-line debuggers.
Description :
The Data Display Debugger (DDD) is a popular GUI for command-line
debuggers like GDB, DBX, JDB, WDB, XDB, the Perl debugger, and the
Python debugger.  DDD allows you to view source texts and provides an
interactive graphical data display, in which data structures are
displayed as graphs.  You can use your mouse to dereference pointers
or view structure contents, which are updated every time the program
stops.  DDD can debug programs written in Ada, C, C++, Chill, Fortran,
Java, Modula, Pascal, Perl, and Python.  DDD provides machine-level
debugging; hypertext source navigation and lookup; breakpoint,
watchpoint, backtrace, and history editors; array plots; undo and
redo; preferences and settings editors; program execution in the
terminal emulation window, debugging on a remote host, an on-line
manual, extensive help on the Motif user interface, and a command-line
interface with full editing, history and completion capabilities.





--- End Message ---

reply via email to

[Prev in Thread] Current Thread [Next in Thread]