[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] About usrp_standard::tune
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] About usrp_standard::tune |
Date: |
Tue, 31 Mar 2009 10:18:17 -0700 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Tue, Mar 31, 2009 at 05:22:32PM +0200, Per Zetterberg wrote:
> Hi All,
>
>
> In dxc_control::set_dxc_freq is the following line:
>
> set_dxc_freq(double dxc_freq){ return d_u->set_rx_freq(d_chan, dxc_freq);
>
> If we go to usrp_standard.h we see that channel is between 0 and 3. I think
> for the standard ".rbf" it is 0 or 1 depending on the side (A or B) as I
> recall. However, the value of d_chan is passed from the first parameter of
> the function usrp_standard::tune. The documentation in usrp_standard.h says
> "which DDC channel we're controlling (almost always 0)". If we set this to
> zero we will always control the A side and never the B side dxc frequency.
The Rx mux controls which ADCs are connected to which DDC.
The channel refers to which DDC. As indicated above channel is almost
always zero, independent of which side you are talking to.
There are nice diagrams and explanation of this in the USRP FAQ.
Please take a look at the wiki.
Eric