[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Question !
From: |
Javier Suarez |
Subject: |
[Discuss-gnuradio] Question ! |
Date: |
Tue, 31 Jan 2012 16:38:43 -0500 |
Good morning,
My name is Javier Mauricio Suarez, I am a student of
electronics engineering at Santander Industrial University in Colombia. I
am working with the USRP1 and GNU Radio for my graduate project. Some
days ago I had a problem that I haven't been able to solve. I try to
verify that GNU Radio works with the USRP1, for doing that I write the
following code lines in the terminal:
>From the gnu radio directory:
cd gnuradio-examples/python/usrp
./usrp_benchmark_usb.py
cd usrp/host/apps
./test_usrp_standard_tx
./test_usrp_standard_rx
this provided by the web page of gnu radio:
http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall#Configuring-USRP-support
In both cases, when I run these code lines I have the following warning and error:
Warning: Treating daughterboard with invalid EEPROM contents as if it were a "Basic Tx."
Warning: This is almost certainly wrong... Use appropriate burn-*-eeprom utility.
I am using the next hardware:
USRP1
motherboard: Rev:4.5 serial number:6296
daughter board: RFX 2200 STM-5 94 V Rev 30 2400-2500 MHz transceiver
I am using gnuradio 3.4-1
and ubuntu version 10.04
I would be very greatful if you can help me with that.
Regards
Javier Mauricio Suarez
- [Discuss-gnuradio] Question !,
Javier Suarez <=