--- Begin Message ---
|
Subject: |
Perl-build-system does not honor #:module-build-flags or #:configure-flags |
|
Date: |
Fri, 07 Dec 2018 02:58:29 -0800 |
Hi
I'm trying hard to package perl-term-readline-gnu but have failed so
far. :D
See the attached patch for my addition to perl-build-system that did not
help.
The Makefile in the source says:
# Usage: perl Makefile.PL [--prefix=...] [--includedir=...]
[--libdir=...]
# [OPTIMIZE=...]
The build failure (with or without my modifications to the build-system)
is:
starting phase `configure'
running `perl' with arguments ("Makefile.PL"
"PREFIX=/gnu/store/w4wb4wd1kjj6gmxlix0i3jj47v0izijh-perl-term-readline-gnu-1.35"
"INSTALLDIRS=site" "NO_PERLLOCAL=1")
Could not find neither libtermcap.a, libncurses.a, or libcurses.
Backtrace:
4 (primitive-load "/gnu/store/vgfkdlnwks28vk50mg0xjl8iaf9…")
In ice-9/eval.scm:
191:35 3 (_ _)
In srfi/srfi-1.scm:
640:9 2 (for-each #<procedure 8298510 at /gnu/store/wy2ja4vrrn…> …)
In
/gnu/store/wy2ja4vrrnakwhabsn87ngsb3bqqm5fx-module-import/guix/build/gnu-build-system.scm:
799:31 1 (_ _)
In
/gnu/store/wy2ja4vrrnakwhabsn87ngsb3bqqm5fx-module-import/guix/build/utils.scm:
616:6 0 (invoke _ . _)
/gnu/store/wy2ja4vrrnakwhabsn87ngsb3bqqm5fx-module-import/guix/build/utils.scm:616:6:
In procedure invoke:
Throw to key `srfi-34' with args `(#<condition &invoke-error [program:
"perl" arguments: ("Makefile.PL"
"PREFIX=/gnu/store/w4wb4wd1kjj6gmxlix0i3jj47v0izijh-perl-term-rea\
dline-gnu-1.35" "INSTALLDIRS=site" "NO_PERLLOCAL=1") exit-status: 1
term-signal: #f stop-signal: #f] 80a8e60>)'.
note: keeping build directory
`/tmp/guix-build-perl-term-readline-gnu-1.35.drv-17'
builder for
`/gnu/store/n6dcbwrfag9klwysrfdkj2j05cr9710i-perl-term-readline-gnu-1.35.drv'
failed with exit code 1
build of
/gnu/store/n6dcbwrfag9klwysrfdkj2j05cr9710i-perl-term-readline-gnu-1.35.drv
failed
View build log at
'/var/log/guix/drvs/n6/dcbwrfag9klwysrfdkj2j05cr9710i-perl-term-readline-gnu-1.35.drv.bz2'.
cannot build derivation
`/gnu/store/pz0zrnpsvip0yxyd18cjazibsrlpf29h-youtube-viewer-cli-3.4.1.drv':
1 dependencies couldn't be built
guix build: error: build failed: build of
`/gnu/store/pz0zrnpsvip0yxyd18cjazibsrlpf29h-youtube-viewer-cli-3.4.1.drv'
failed
--
Cheers
Swedebugia
0001-gnu-Add-perl-term-readline-gnu-flags-not-honored.patch
Description: Text Data
--- End Message ---
--- Begin Message ---
|
Subject: |
Re: bug#33659: Perl-build-system does not honor #:module-build-flags or #:configure-flags |
|
Date: |
Fri, 24 Sep 2021 21:29:49 -0700 |
Hello from three years in the future!
swedebugia@riseup.net writes:
> Hi
>
> I'm trying hard to package perl-term-readline-gnu but have failed so
> far. :D
>
> See the attached patch for my addition to perl-build-system that did not
> help.
>
> The Makefile in the source says:
>
> # Usage: perl Makefile.PL [--prefix=...] [--includedir=...]
> [--libdir=...]
> # [OPTIMIZE=...]
>
> The build failure (with or without my modifications to the build-system)
> is:
>
> starting phase `configure'
> running `perl' with arguments ("Makefile.PL"
> "PREFIX=/gnu/store/w4wb4wd1kjj6gmxlix0i3jj47v0izijh-perl-term-readline-gnu-1.35"
> "INSTALLDIRS=site" "NO_PERLLOCAL=1")
> Could not find neither libtermcap.a, libncurses.a, or libcurses.
> Backtrace:
> 4 (primitive-load "/gnu/store/vgfkdlnwks28vk50mg0xjl8iaf9…")
> In ice-9/eval.scm:
> 191:35 3 (_ _)
> In srfi/srfi-1.scm:
> 640:9 2 (for-each #<procedure 8298510 at /gnu/store/wy2ja4vrrn…> …)
> In
> /gnu/store/wy2ja4vrrnakwhabsn87ngsb3bqqm5fx-module-import/guix/build/gnu-build-system.scm:
> 799:31 1 (_ _)
> In
> /gnu/store/wy2ja4vrrnakwhabsn87ngsb3bqqm5fx-module-import/guix/build/utils.scm:
> 616:6 0 (invoke _ . _)
>
> /gnu/store/wy2ja4vrrnakwhabsn87ngsb3bqqm5fx-module-import/guix/build/utils.scm:616:6:
> In procedure invoke:
> Throw to key `srfi-34' with args `(#<condition &invoke-error [program:
> "perl" arguments: ("Makefile.PL"
> "PREFIX=/gnu/store/w4wb4wd1kjj6gmxlix0i3jj47v0izijh-perl-term-rea\
> dline-gnu-1.35" "INSTALLDIRS=site" "NO_PERLLOCAL=1") exit-status: 1
> term-signal: #f stop-signal: #f] 80a8e60>)'.
> note: keeping build directory
> `/tmp/guix-build-perl-term-readline-gnu-1.35.drv-17'
> builder for
> `/gnu/store/n6dcbwrfag9klwysrfdkj2j05cr9710i-perl-term-readline-gnu-1.35.drv'
> failed with exit code 1
> build of
> /gnu/store/n6dcbwrfag9klwysrfdkj2j05cr9710i-perl-term-readline-gnu-1.35.drv
> failed
> View build log at
> '/var/log/guix/drvs/n6/dcbwrfag9klwysrfdkj2j05cr9710i-perl-term-readline-gnu-1.35.drv.bz2'.
> cannot build derivation
> `/gnu/store/pz0zrnpsvip0yxyd18cjazibsrlpf29h-youtube-viewer-cli-3.4.1.drv':
> 1 dependencies couldn't be built
> guix build: error: build failed: build of
> `/gnu/store/pz0zrnpsvip0yxyd18cjazibsrlpf29h-youtube-viewer-cli-3.4.1.drv'
> failed
I'm closing this old bug because the error was actually because ncurses
was not an input; see the working package definition (added last year):
guix edit perl-term-readline-gnu
--
Sarah
--- End Message ---