[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
branch master updated: gnu: Add u-boot-pinebook-pro-rk3399.
|
From: |
guix-commits |
|
Subject: |
branch master updated: gnu: Add u-boot-pinebook-pro-rk3399. |
|
Date: |
Mon, 20 Apr 2020 22:14:16 -0400 |
This is an automated email from the git hooks/post-receive script.
vagrantc pushed a commit to branch master
in repository guix.
The following commit(s) were added to refs/heads/master by this push:
new 5327b39 gnu: Add u-boot-pinebook-pro-rk3399.
5327b39 is described below
commit 5327b399a875a00304ccc1e6ece7190f26113539
Author: Vagrant Cascadian <address@hidden>
AuthorDate: Mon Apr 20 18:21:07 2020 -0700
gnu: Add u-boot-pinebook-pro-rk3399.
* gnu/packages/bootloaders (u-boot-pinebook-pro-rk3399): New variable.
* gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch: New file.
* gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch: New file.
* gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch: New file.
* gnu/packages/patches/u-boot-leds-common-binding-con.patch: New file.
* gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch: New file.
* gnu/packages/patches/u-boot-video-rockchip-fix-build.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add new patches.
* gnu/bootloader/u-boot.scm (install-pinebook-pro-rk3399-u-boot,
u-boot-pinebook-pro-rk3399-bootloader): New variable.
Co-authored-by: Jan Nieuwenhuizen <address@hidden>
---
gnu/bootloader/u-boot.scm | 11 +
gnu/local.mk | 6 +
gnu/packages/bootloaders.scm | 30 +
.../patches/u-boot-DT-for-Pinebook-Pro.patch | 1132 ++++++++++++++++++++
.../u-boot-add-boe-nv140fhmn49-display.patch | 29 +
.../patches/u-boot-gpio-keys-binding-cons.patch | 37 +
.../patches/u-boot-leds-common-binding-con.patch | 115 ++
.../u-boot-support-Pinebook-Pro-laptop.patch | 367 +++++++
.../patches/u-boot-video-rockchip-fix-build.patch | 48 +
9 files changed, 1775 insertions(+)
diff --git a/gnu/bootloader/u-boot.scm b/gnu/bootloader/u-boot.scm
index 6f41d0a..1da9d04 100644
--- a/gnu/bootloader/u-boot.scm
+++ b/gnu/bootloader/u-boot.scm
@@ -2,6 +2,7 @@
;;; Copyright © 2017 David Craven <address@hidden>
;;; Copyright © 2017, 2019 Mathieu Othacehe <address@hidden>
;;; Copyright © 2020 Julien Lepiller <address@hidden>
+;;; Copyright © 2020 Jan (janneke) Nieuwenhuizen <address@hidden>
;;;
;;; This file is part of GNU Guix.
;;;
@@ -37,6 +38,7 @@
u-boot-pine64-plus-bootloader
u-boot-pine64-lts-bootloader
u-boot-pinebook-bootloader
+ u-boot-pinebook-pro-rk3399-bootloader
u-boot-puma-rk3399-bootloader
u-boot-rock64-rk3328-bootloader
u-boot-rockpro64-rk3399-bootloader
@@ -123,6 +125,8 @@
(write-file-on-device u-boot (stat:size (stat u-boot))
device (* 16384 512)))))
+(define install-pinebook-pro-rk3399-u-boot install-rockpro64-rk3399-u-boot)
+
;;;
@@ -243,3 +247,10 @@
(inherit u-boot-bootloader)
(package u-boot-rockpro64-rk3399)
(installer install-rockpro64-rk3399-u-boot)))
+
+(define u-boot-pinebook-pro-rk3399-bootloader
+ ;; SD and eMMC use the same format
+ (bootloader
+ (inherit u-boot-bootloader)
+ (package u-boot-pinebook-pro-rk3399)
+ (installer install-pinebook-pro-rk3399-u-boot)))
diff --git a/gnu/local.mk b/gnu/local.mk
index fb0454f..ca863a8 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -1482,6 +1482,12 @@ dist_patch_DATA =
\
%D%/packages/patches/tomb-fix-errors-on-open.patch \
%D%/packages/patches/tuxpaint-stamps-path.patch \
%D%/packages/patches/u-boot-riscv64-fix-extlinux.patch \
+ %D%/packages/patches/u-boot-DT-for-Pinebook-Pro.patch \
+ %D%/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch \
+ %D%/packages/patches/u-boot-gpio-keys-binding-cons.patch \
+ %D%/packages/patches/u-boot-leds-common-binding-con.patch \
+ %D%/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch \
+ %D%/packages/patches/u-boot-video-rockchip-fix-build.patch \
%D%/packages/patches/ucx-tcp-iface-ioctl.patch \
%D%/packages/patches/udiskie-no-appindicator.patch \
%D%/packages/patches/unzip-CVE-2014-8139.patch \
diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm
index 28a088a..750579e 100644
--- a/gnu/packages/bootloaders.scm
+++ b/gnu/packages/bootloaders.scm
@@ -11,6 +11,7 @@
;;; Copyright © 2019 nee <address@hidden>
;;; Copyright © 2019 Mathieu Othacehe <address@hidden>
;;; Copyright © 2020 Björn Höfling <address@hidden>
+;;; Copyright © 2018, 2019, 2020 Vagrant Cascadian <address@hidden>
;;;
;;; This file is part of GNU Guix.
;;;
@@ -834,6 +835,35 @@ to Novena upstream, does not load u-boot.img from the
first partition.")
`(("firmware" ,arm-trusted-firmware-rk3399)
,@(package-native-inputs base))))))
+(define-public u-boot-pinebook-pro-rk3399
+ (let ((base (make-u-boot-package "pinebook-pro-rk3399" "aarch64-linux-gnu")))
+ (package
+ (inherit base)
+ (source (origin
+ (inherit (package-source u-boot))
+ (patches
+ (search-patches "u-boot-add-boe-nv140fhmn49-display.patch"
+ "u-boot-gpio-keys-binding-cons.patch"
+ "u-boot-leds-common-binding-con.patch"
+ "u-boot-DT-for-Pinebook-Pro.patch"
+ "u-boot-support-Pinebook-Pro-laptop.patch"
+ "u-boot-video-rockchip-fix-build.patch"))))
+ (arguments
+ (substitute-keyword-arguments (package-arguments base)
+ ((#:phases phases)
+ `(modify-phases ,phases
+ (add-after 'unpack 'set-environment
+ (lambda* (#:key inputs #:allow-other-keys)
+ (setenv "BL31" (string-append (assoc-ref inputs "firmware")
+ "/bl31.elf"))
+ #t))
+ ;; Phases do not succeed on the bl31 ELF.
+ (delete 'strip)
+ (delete 'validate-runpath)))))
+ (native-inputs
+ `(("firmware" ,arm-trusted-firmware-rk3399)
+ ,@(package-native-inputs base))))))
+
(define-public vboot-utils
(package
(name "vboot-utils")
diff --git a/gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch
b/gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch
new file mode 100644
index 0000000..f88d12f
--- /dev/null
+++ b/gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch
@@ -0,0 +1,1132 @@
+From b128c2e0b480ee992fabe554d19cd471efb11095 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <address@hidden>
+Date: Mon, 20 Apr 2020 20:27:35 +0100
+Origin: https://patchwork.ozlabs.org/project/uboot/patch/address@hidden/
+Subject: [PATCH 4/5] arm: dts: rockchip: Add initial DT for Pinebook Pro
+
+Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1.
+
+Signed-off-by: Peter Robinson <address@hidden>
+---
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/rk3399-pinebook-pro.dts | 1096 ++++++++++++++++++++++++++
+ 2 files changed, 1097 insertions(+)
+ create mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 820ee9733a..885bf0ef58 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -125,6 +125,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
+ rk3399-nanopi-m4.dtb \
+ rk3399-nanopi-neo4.dtb \
+ rk3399-orangepi.dtb \
++ rk3399-pinebook-pro.dtb \
+ rk3399-puma-ddr1333.dtb \
+ rk3399-puma-ddr1600.dtb \
+ rk3399-puma-ddr1866.dtb \
+diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts
b/arch/arm/dts/rk3399-pinebook-pro.dts
+new file mode 100644
+index 0000000000..294d21bf45
+--- /dev/null
++++ b/arch/arm/dts/rk3399-pinebook-pro.dts
+@@ -0,0 +1,1096 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
++ * Copyright (c) 2018 Akash Gajjar <address@hidden>
++ * Copyright (c) 2020 Tobias Schramm <address@hidden>
++ */
++
++/dts-v1/;
++#include <dt-bindings/input/gpio-keys.h>
++#include <dt-bindings/input/linux-event-codes.h>
++#include <dt-bindings/pwm/pwm.h>
++#include <dt-bindings/usb/pd.h>
++#include <dt-bindings/leds/common.h>
++#include "rk3399.dtsi"
++#include "rk3399-opp.dtsi"
++
++/ {
++ model = "Pine64 Pinebook Pro";
++ compatible = "pine64,pinebook-pro", "rockchip,rk3399";
++
++ chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ backlight: edp-backlight {
++ compatible = "pwm-backlight";
++ power-supply = <&vcc_12v>;
++ pwms = <&pwm0 0 740740 0>;
++ };
++
++ edp_panel: edp-panel {
++ compatible = "boe,nv140fhmn49";
++ backlight = <&backlight>;
++ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&panel_en_gpio>;
++ power-supply = <&vcc3v3_panel>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ panel_in_edp: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&edp_out_panel>;
++ };
++ };
++ };
++ };
++
++ /*
++ * Use separate nodes for gpio-keys to allow for selective deactivation
++ * of wakeup sources via sysfs without disabling the whole key
++ */
++ gpio-key-lid {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&lidbtn_gpio>;
++
++ lid {
++ debounce-interval = <20>;
++ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
++ label = "Lid";
++ linux,code = <SW_LID>;
++ linux,input-type = <EV_SW>;
++ wakeup-event-action = <EV_ACT_DEASSERTED>;
++ wakeup-source;
++ };
++ };
++
++ gpio-key-power {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwrbtn_gpio>;
++
++ power {
++ debounce-interval = <20>;
++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
++ label = "Power";
++ linux,code = <KEY_POWER>;
++ wakeup-source;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
++
++ green-led {
++ color = <LED_COLOR_ID_GREEN>;
++ default-state = "on";
++ function = LED_FUNCTION_POWER;
++ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
++ label = "green:power";
++ };
++
++ red-led {
++ color = <LED_COLOR_ID_RED>;
++ default-state = "off";
++ function = LED_FUNCTION_STANDBY;
++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
++ label = "red:standby";
++ panic-indicator;
++ retain-state-suspended;
++ };
++ };
++
++ /* Power sequence for SDIO WiFi module */
++ sdio_pwrseq: sdio-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rk808 1>;
++ clock-names = "ext_clock";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_enable_h_gpio>;
++ post-power-on-delay-ms = <100>;
++ power-off-delay-us = <500000>;
++
++ /* WL_REG_ON on module */
++ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
++ };
++
++ /* Audio components */
++ es8316-sound {
++ compatible = "simple-audio-card";
++ pinctrl-names = "default";
++ pinctrl-0 = <&hp_det_gpio>;
++ simple-audio-card,name = "rockchip,es8316-codec";
++ simple-audio-card,format = "i2s";
++ simple-audio-card,mclk-fs = <256>;
++
++ simple-audio-card,widgets =
++ "Microphone", "Mic Jack",
++ "Headphone", "Headphones",
++ "Speaker", "Speaker";
++ simple-audio-card,routing =
++ "MIC1", "Mic Jack",
++ "Headphones", "HPOL",
++ "Headphones", "HPOR",
++ "Speaker Amplifier INL", "HPOL",
++ "Speaker Amplifier INR", "HPOR",
++ "Speaker", "Speaker Amplifier OUTL",
++ "Speaker", "Speaker Amplifier OUTR";
++
++ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0
GPIO_ACTIVE_HIGH>;
++ simple-audio-card,aux-devs = <&speaker_amp>;
++ simple-audio-card,pin-switches = "Speaker";
++
++ simple-audio-card,cpu {
++ sound-dai = <&i2s1>;
++ };
++
++ simple-audio-card,codec {
++ sound-dai = <&es8316>;
++ };
++ };
++
++ speaker_amp: speaker-amplifier {
++ compatible = "simple-audio-amplifier";
++ enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
++ sound-name-prefix = "Speaker Amplifier";
++ VCC-supply = <&pa_5v>;
++ };
++
++ /* Power tree */
++ /* Root power source */
++ vcc_sysin: vcc-sysin {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_sysin";
++ regulator-always-on;
++ regulator-boot-on;
++ };
++
++ /* Regulators supplied by vcc_sysin */
++ /* LCD backlight supply */
++ vcc_12v: vcc-12v {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_12v";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <12000000>;
++ regulator-max-microvolt = <12000000>;
++ vin-supply = <&vcc_sysin>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ /* Main 3.3 V supply */
++ vcc3v3_sys: wifi_bat: vcc3v3-sys {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc_sysin>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ /* 5 V USB power supply */
++ vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwr_5v_gpio>;
++ regulator-name = "vcc5v0_usb";
++ regulator-always-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc_sysin>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ /* RK3399 logic supply */
++ vdd_log: vdd-log {
++ compatible = "pwm-regulator";
++ pwms = <&pwm2 0 25000 1>;
++ regulator-name = "vdd_log";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1400000>;
++ vin-supply = <&vcc_sysin>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ /* Regulators supplied by vcc3v3_sys */
++ /* 0.9 V supply, always on */
++ vcc_0v9: vcc-0v9 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ /* S3 1.8 V supply, switched by vcc1v8_s3 */
++ vcca1v8_s3: vcc1v8-s3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca1v8_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ /* micro SD card power */
++ vcc3v0_sd: vcc3v0-sd {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
++ regulator-name = "vcc3v0_sd";
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ vin-supply = <&vcc3v3_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ /* LCD panel power, called VCC3V3_S0 in schematic */
++ vcc3v3_panel: vcc3v3-panel {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lcdvcc_en_gpio>;
++ regulator-name = "vcc3v3_panel";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-enable-ramp-delay = <100000>;
++ vin-supply = <&vcc3v3_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ /* M.2 adapter power, switched by vcc1v8_s3 */
++ vcc3v3_ssd: vcc3v3-ssd {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_ssd";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ /* Regulators supplied by vcc5v0_usb */
++ /* USB 3 port power supply regulator */
++ vcc5v0_otg: vcc5v0-otg {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_host_en_gpio>;
++ regulator-name = "vcc5v0_otg";
++ regulator-always-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ /* Regulators supplied by vcc5v0_usb */
++ /* Type C port power supply regulator */
++ vbus_5vout: vbus_typec: vbus-5vout {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
++ regulator-name = "vbus_5vout";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ /* Regulators supplied by vcc_1v8 */
++ /* Primary 0.9 V LDO */
++ vcca0v9_s3: vcca0v9-s3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc0v9_s3";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc_1v8>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ mains_charger: dc-charger {
++ compatible = "gpio-charger";
++ charger-type = "mains";
++ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
++
++ /* Also triggered by USB charger */
++ pinctrl-names = "default";
++ pinctrl-0 = <&dc_det_gpio>;
++ };
++};
++
++&cdn_dp {
++ status = "okay";
++};
++
++&cpu_b0 {
++ cpu-supply = <&vdd_cpu_b>;
++};
++
++&cpu_b1 {
++ cpu-supply = <&vdd_cpu_b>;
++};
++
++&cpu_l0 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&cpu_l1 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&cpu_l2 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&cpu_l3 {
++ cpu-supply = <&vdd_cpu_l>;
++};
++
++&edp {
++ force-hpd;
++ pinctrl-names = "default";
++ pinctrl-0 = <&edp_hpd>;
++ status = "okay";
++
++ ports {
++ edp_out: port@1 {
++ reg = <1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ edp_out_panel: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&panel_in_edp>;
++ };
++ };
++ };
++};
++
++&emmc_phy {
++ status = "okay";
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu>;
++ status = "okay";
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&i2c0 {
++ clock-frequency = <400000>;
++ i2c-scl-falling-time-ns = <4>;
++ i2c-scl-rising-time-ns = <168>;
++ status = "okay";
++
++ rk808: pmic@1b {
++ compatible = "rockchip,rk808";
++ reg = <0x1b>;
++ #clock-cells = <1>;
++ clock-output-names = "xin32k", "rk808-clkout2";
++ interrupt-parent = <&gpio3>;
++ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int_l_gpio>;
++ rockchip,system-power-controller;
++ wakeup-source;
++
++ vcc1-supply = <&vcc_sysin>;
++ vcc2-supply = <&vcc_sysin>;
++ vcc3-supply = <&vcc_sysin>;
++ vcc4-supply = <&vcc_sysin>;
++ vcc6-supply = <&vcc_sysin>;
++ vcc7-supply = <&vcc_sysin>;
++ vcc8-supply = <&vcc3v3_sys>;
++ vcc9-supply = <&vcc_sysin>;
++ vcc10-supply = <&vcc_sysin>;
++ vcc11-supply = <&vcc_sysin>;
++ vcc12-supply = <&vcc3v3_sys>;
++ vcc13-supply = <&vcc_sysin>;
++ vcc14-supply = <&vcc_sysin>;
++
++ regulators {
++ /* rk3399 center logic supply */
++ vdd_center: DCDC_REG1 {
++ regulator-name = "vdd_center";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_l: DCDC_REG2 {
++ regulator-name = "vdd_cpu_l";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc_1v8: vcc_wl: DCDC_REG4 {
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ /* not used */
++ LDO_REG1 {
++ };
++
++ /* not used */
++ LDO_REG2 {
++ };
++
++ vcc1v8_pmupll: LDO_REG3 {
++ regulator-name = "vcc1v8_pmupll";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcc_sdio: LDO_REG4 {
++ regulator-name = "vcc_sdio";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3000000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3000000>;
++ };
++ };
++
++ vcca3v0_codec: LDO_REG5 {
++ regulator-name = "vcca3v0_codec";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v5: LDO_REG6 {
++ regulator-name = "vcc_1v5";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1500000>;
++ };
++ };
++
++ vcca1v8_codec: LDO_REG7 {
++ regulator-name = "vcca1v8_codec";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_3v0: LDO_REG8 {
++ regulator-name = "vcc_3v0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3000000>;
++ };
++ };
++
++ vcc3v3_s3: SWITCH_REG1 {
++ regulator-name = "vcc3v3_s3";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_s0: SWITCH_REG2 {
++ regulator-name = "vcc3v3_s0";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++
++ vdd_cpu_b: regulator@40 {
++ compatible = "silergy,syr827";
++ reg = <0x40>;
++ fcs,suspend-voltage-selector = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vsel1_gpio>;
++ regulator-name = "vdd_cpu_b";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1500000>;
++ regulator-ramp-delay = <1000>;
++ vin-supply = <&vcc_1v8>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_gpu: regulator@41 {
++ compatible = "silergy,syr828";
++ reg = <0x41>;
++ fcs,suspend-voltage-selector = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vsel2_gpio>;
++ regulator-name = "vdd_gpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1500000>;
++ regulator-ramp-delay = <1000>;
++ vin-supply = <&vcc_1v8>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ i2c-scl-falling-time-ns = <4>;
++ i2c-scl-rising-time-ns = <168>;
++ status = "okay";
++
++ es8316: es8316@11 {
++ compatible = "everest,es8316";
++ reg = <0x11>;
++ clocks = <&cru SCLK_I2S_8CH_OUT>;
++ clock-names = "mclk";
++ #sound-dai-cells = <0>;
++ };
++};
++
++&i2c3 {
++ i2c-scl-falling-time-ns = <15>;
++ i2c-scl-rising-time-ns = <450>;
++ status = "okay";
++};
++
++&i2c4 {
++ i2c-scl-falling-time-ns = <20>;
++ i2c-scl-rising-time-ns = <600>;
++ status = "okay";
++
++ fusb0: fusb30x@22 {
++ compatible = "fcs,fusb302";
++ reg = <0x22>;
++ fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&fusb0_int_gpio>;
++ vbus-supply = <&vbus_typec>;
++
++ connector {
++ compatible = "usb-c-connector";
++ data-role = "host";
++ label = "USB-C";
++ op-sink-microwatt = <1000000>;
++ power-role = "dual";
++ sink-pdos =
++ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
++ source-pdos =
++ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
++ try-power-role = "sink";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++
++ usbc_hs: endpoint {
++ remote-endpoint =
++ <&u2phy0_typec_hs>;
++ };
++ };
++
++ port@1 {
++ reg = <1>;
++
++ usbc_ss: endpoint {
++ remote-endpoint =
++ <&tcphy0_typec_ss>;
++ };
++ };
++
++ port@2 {
++ reg = <2>;
++
++ usbc_dp: endpoint {
++ remote-endpoint =
++ <&tcphy0_typec_dp>;
++ };
++ };
++ };
++ };
++ };
++};
++
++&i2s1 {
++ #sound-dai-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
++ rockchip,capture-channels = <8>;
++ rockchip,playback-channels = <8>;
++ status = "okay";
++};
++
++&io_domains {
++ audio-supply = <&vcc_3v0>;
++ gpio1830-supply = <&vcc_3v0>;
++ sdmmc-supply = <&vcc_sdio>;
++ status = "okay";
++};
++
++&pcie_phy {
++ status = "okay";
++};
++
++&pcie0 {
++ bus-scan-delay-ms = <1000>;
++ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
++ max-link-speed = <2>;
++ num-lanes = <4>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_clkreqn_cpm>;
++ vpcie0v9-supply = <&vcca0v9_s3>;
++ vpcie1v8-supply = <&vcca1v8_s3>;
++ vpcie3v3-supply = <&vcc3v3_ssd>;
++ status = "okay";
++};
++
++&pinctrl {
++ buttons {
++ pwrbtn_gpio: pwrbtn-gpio {
++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++
++ lidbtn_gpio: lidbtn-gpio {
++ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ dc-charger {
++ dc_det_gpio: dc-det-gpio {
++ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ es8316 {
++ hp_det_gpio: hp-det-gpio {
++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ fusb302x {
++ fusb0_int_gpio: fusb0-int-gpio {
++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ i2s1 {
++ i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
++ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
++ };
++ };
++
++ lcd-panel {
++ lcdvcc_en_gpio: lcdvcc-en-gpio {
++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ panel_en_gpio: panel-en-gpio {
++ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lcd_panel_reset_gpio: lcd-panel-reset-gpio {
++ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ leds {
++ pwrled_gpio: pwrled_gpio {
++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ slpled_gpio: slpled_gpio {
++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pmic {
++ pmic_int_l_gpio: pmic-int-l-gpio {
++ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++
++ vsel1_gpio: vsel1-gpio {
++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++
++ vsel2_gpio: vsel2-gpio {
++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++ };
++
++ sdcard {
++ sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
++ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ };
++
++ sdio-pwrseq {
++ wifi_enable_h_gpio: wifi-enable-h-gpio {
++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ usb-typec {
++ vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
++ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb2 {
++ pwr_5v_gpio: pwr-5v-gpio {
++ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
++ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ wireless-bluetooth {
++ bt_wake_gpio: bt-wake-gpio {
++ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_host_wake_gpio: bt-host-wake-gpio {
++ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_reset_gpio: bt-reset-gpio {
++ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmu1830-supply = <&vcc_3v0>;
++ status = "okay";
++};
++
++&pwm0 {
++ status = "okay";
++};
++
++&pwm2 {
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca1v8_s3>;
++ status = "okay";
++};
++
++&sdmmc {
++ bus-width = <4>;
++ cap-mmc-highspeed;
++ cap-sd-highspeed;
++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
++ disable-wp;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc3v0_sd>;
++ vqmmc-supply = <&vcc_sdio>;
++ status = "okay";
++};
++
++&sdio0 {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ cap-sdio-irq;
++ keep-power-in-suspend;
++ mmc-pwrseq = <&sdio_pwrseq>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
++ sd-uhs-sdr104;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ mmc-hs200-1_8v;
++ non-removable;
++ status = "okay";
++};
++
++&spi1 {
++ max-freq = <10000000>;
++ status = "okay";
++
++ spiflash: flash@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ m25p,fast-read;
++ spi-max-frequency = <10000000>;
++ };
++};
++
++&tcphy0 {
++ status = "okay";
++};
++
++&tcphy0_dp {
++ port {
++ tcphy0_typec_dp: endpoint {
++ remote-endpoint = <&usbc_dp>;
++ };
++ };
++};
++
++&tcphy0_usb3 {
++ port {
++ tcphy0_typec_ss: endpoint {
++ remote-endpoint = <&usbc_ss>;
++ };
++ };
++};
++
++&tcphy1 {
++ status = "okay";
++};
++
++&tsadc {
++ /* tshut mode 0:CRU 1:GPIO */
++ rockchip,hw-tshut-mode = <1>;
++ /* tshut polarity 0:LOW 1:HIGH */
++ rockchip,hw-tshut-polarity = <1>;
++ status = "okay";
++};
++
++&u2phy0 {
++ status = "okay";
++
++ u2phy0_otg: otg-port {
++ status = "okay";
++ };
++
++ u2phy0_host: host-port {
++ phy-supply = <&vcc5v0_otg>;
++ status = "okay";
++ };
++
++ port {
++ u2phy0_typec_hs: endpoint {
++ remote-endpoint = <&usbc_hs>;
++ };
++ };
++};
++
++&u2phy1 {
++ status = "okay";
++
++ u2phy1_otg: otg-port {
++ status = "okay";
++ };
++
++ u2phy1_host: host-port {
++ phy-supply = <&vcc5v0_otg>;
++ status = "okay";
++ };
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
++ uart-has-rtscts;
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm4345c5";
++ clocks = <&rk808 1>;
++ clock-names = "lpo";
++ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
++ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
++ max-speed = <1500000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
++ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
++ vbat-supply = <&wifi_bat>;
++ vddio-supply = <&vcc_wl>;
++ };
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
++
++&usb_host1_ehci {
++ status = "okay";
++};
++
++&usb_host1_ohci {
++ status = "okay";
++};
++
++&usbdrd3_0 {
++ status = "okay";
++};
++
++&usbdrd_dwc3_0 {
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usbdrd3_1 {
++ status = "okay";
++};
++
++&usbdrd_dwc3_1 {
++ dr_mode = "host";
++ status = "okay";
++};
++
++&vopb {
++ status = "okay";
++};
++
++&vopb_mmu {
++ status = "okay";
++};
++
++&vopl {
++ status = "okay";
++};
++
++&vopl_mmu {
++ status = "okay";
++};
+--
+2.20.1
+
diff --git a/gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch
b/gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch
new file mode 100644
index 0000000..c359522
--- /dev/null
+++ b/gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch
@@ -0,0 +1,29 @@
+From 00978950fed39b6104b6b4f141450a66cc3400fa Mon Sep 17 00:00:00 2001
+From: Peter Robinson <address@hidden>
+Date: Mon, 20 Apr 2020 20:27:32 +0100
+Origin: https://patchwork.ozlabs.org/project/uboot/patch/address@hidden/
+Subject: [PATCH 1/5] video: simple_panel: add boe,nv140fhmn49 display
+
+add "boe,nv140fhmn49" display to compatible node.
+
+Signed-off-by: Peter Robinson <address@hidden>
+Cc: Anatolij Gustschin <address@hidden>
+---
+ drivers/video/simple_panel.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/video/simple_panel.c b/drivers/video/simple_panel.c
+index c3c0e84732..5722811117 100644
+--- a/drivers/video/simple_panel.c
++++ b/drivers/video/simple_panel.c
+@@ -105,6 +105,7 @@ static const struct udevice_id simple_panel_ids[] = {
+ { .compatible = "auo,b133xtn01" },
+ { .compatible = "auo,b116xw03" },
+ { .compatible = "auo,b133htn01" },
++ { .compatible = "boe,nv140fhmn49" },
+ { .compatible = "lg,lb070wv8" },
+ { }
+ };
+--
+2.20.1
+
diff --git a/gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch
b/gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch
new file mode 100644
index 0000000..aec33a7
--- /dev/null
+++ b/gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch
@@ -0,0 +1,37 @@
+From 451bd72bf966df7518682cb748a804634ea19424 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <address@hidden>
+Date: Mon, 20 Apr 2020 20:27:33 +0100
+Origin: https://patchwork.ozlabs.org/project/uboot/patch/address@hidden/
+Subject: [PATCH 2/5] dt-bindings: input: adopt Linux gpio-keys binding
+ constants
+
+Sync the gpio-keys input bindings from linux 5.7-rc1.
+
+Signed-off-by: Peter Robinson <address@hidden>
+---
+ include/dt-bindings/input/gpio-keys.h | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+ create mode 100644 include/dt-bindings/input/gpio-keys.h
+
+diff --git a/include/dt-bindings/input/gpio-keys.h
b/include/dt-bindings/input/gpio-keys.h
+new file mode 100644
+index 0000000000..8962df79e7
+--- /dev/null
++++ b/include/dt-bindings/input/gpio-keys.h
+@@ -0,0 +1,13 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * This header provides constants for gpio keys bindings.
++ */
++
++#ifndef _DT_BINDINGS_GPIO_KEYS_H
++#define _DT_BINDINGS_GPIO_KEYS_H
++
++#define EV_ACT_ANY 0x00 /* asserted or deasserted */
++#define EV_ACT_ASSERTED 0x01 /* asserted */
++#define EV_ACT_DEASSERTED 0x02 /* deasserted */
++
++#endif /* _DT_BINDINGS_GPIO_KEYS_H */
+--
+2.20.1
+
diff --git a/gnu/packages/patches/u-boot-leds-common-binding-con.patch
b/gnu/packages/patches/u-boot-leds-common-binding-con.patch
new file mode 100644
index 0000000..8374081
--- /dev/null
+++ b/gnu/packages/patches/u-boot-leds-common-binding-con.patch
@@ -0,0 +1,115 @@
+From 282b6ca04abbe1302d04caa05be5fc5afb127141 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <address@hidden>
+Date: Mon, 20 Apr 2020 20:27:34 +0100
+Origin: https://patchwork.ozlabs.org/project/uboot/patch/address@hidden/
+Subject: [PATCH 3/5] dt-bindings: leds: adopt Linux leds common binding
+ constants
+
+Sync the common leds bindings from linux 5.7-rc1.
+
+Signed-off-by: Peter Robinson <address@hidden>
+---
+ include/dt-bindings/leds/common.h | 91 +++++++++++++++++++++++++++++++
+ 1 file changed, 91 insertions(+)
+ create mode 100644 include/dt-bindings/leds/common.h
+
+diff --git a/include/dt-bindings/leds/common.h
b/include/dt-bindings/leds/common.h
+new file mode 100644
+index 0000000000..0ce7dfc00d
+--- /dev/null
++++ b/include/dt-bindings/leds/common.h
+@@ -0,0 +1,91 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * This header provides macros for the common LEDs device tree bindings.
++ *
++ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
++ * Author: Jacek Anaszewski <address@hidden>
++ *
++ * Copyright (C) 2019 Jacek Anaszewski <address@hidden>
++ * Copyright (C) 2020 Pavel Machek <address@hidden>
++ */
++
++#ifndef __DT_BINDINGS_LEDS_H
++#define __DT_BINDINGS_LEDS_H
++
++/* External trigger type */
++#define LEDS_TRIG_TYPE_EDGE 0
++#define LEDS_TRIG_TYPE_LEVEL 1
++
++/* Boost modes */
++#define LEDS_BOOST_OFF 0
++#define LEDS_BOOST_ADAPTIVE 1
++#define LEDS_BOOST_FIXED 2
++
++/* Standard LED colors */
++#define LED_COLOR_ID_WHITE 0
++#define LED_COLOR_ID_RED 1
++#define LED_COLOR_ID_GREEN 2
++#define LED_COLOR_ID_BLUE 3
++#define LED_COLOR_ID_AMBER 4
++#define LED_COLOR_ID_VIOLET 5
++#define LED_COLOR_ID_YELLOW 6
++#define LED_COLOR_ID_IR 7
++#define LED_COLOR_ID_MAX 8
++
++/* Standard LED functions */
++/* Keyboard LEDs, usually it would be input4::capslock etc. */
++/* Obsolete equivalent: "shift-key-light" */
++#define LED_FUNCTION_CAPSLOCK "capslock"
++#define LED_FUNCTION_SCROLLLOCK "scrolllock"
++#define LED_FUNCTION_NUMLOCK "numlock"
++/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
++ "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
++#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
++
++/* System LEDs, usually found on system body.
++ platform::mute (etc) is sometimes seen, :mute would be better */
++#define LED_FUNCTION_POWER "power"
++#define LED_FUNCTION_DISK "disk"
++
++/* Obsolete: "platform:*:charging" (allwinner sun50i) */
++#define LED_FUNCTION_CHARGING "charging"
++/* Used RGB notification LEDs common on phones.
++ Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4),
++ "lp5523:{r,g,b}" (Nokia N900) */
++#define LED_FUNCTION_STATUS "status"
++
++#define LED_FUNCTION_MICMUTE "micmute"
++#define LED_FUNCTION_MUTE "mute"
++
++/* Miscelleaus functions. Use functions above if you can. */
++#define LED_FUNCTION_ACTIVITY "activity"
++#define LED_FUNCTION_ALARM "alarm"
++#define LED_FUNCTION_BACKLIGHT "backlight"
++#define LED_FUNCTION_BLUETOOTH "bluetooth"
++#define LED_FUNCTION_BOOT "boot"
++#define LED_FUNCTION_CPU "cpu"
++#define LED_FUNCTION_DEBUG "debug"
++#define LED_FUNCTION_DISK_ACTIVITY "disk-activity"
++#define LED_FUNCTION_DISK_ERR "disk-err"
++#define LED_FUNCTION_DISK_READ "disk-read"
++#define LED_FUNCTION_DISK_WRITE "disk-write"
++#define LED_FUNCTION_FAULT "fault"
++#define LED_FUNCTION_FLASH "flash"
++#define LED_FUNCTION_HEARTBEAT "heartbeat"
++#define LED_FUNCTION_INDICATOR "indicator"
++#define LED_FUNCTION_LAN "lan"
++#define LED_FUNCTION_MAIL "mail"
++#define LED_FUNCTION_MTD "mtd"
++#define LED_FUNCTION_PANIC "panic"
++#define LED_FUNCTION_PROGRAMMING "programming"
++#define LED_FUNCTION_RX "rx"
++#define LED_FUNCTION_SD "sd"
++#define LED_FUNCTION_STANDBY "standby"
++#define LED_FUNCTION_TORCH "torch"
++#define LED_FUNCTION_TX "tx"
++#define LED_FUNCTION_USB "usb"
++#define LED_FUNCTION_WAN "wan"
++#define LED_FUNCTION_WLAN "wlan"
++#define LED_FUNCTION_WPS "wps"
++
++#endif /* __DT_BINDINGS_LEDS_H */
+--
+2.20.1
+
diff --git a/gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch
b/gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch
new file mode 100644
index 0000000..c6f91fa
--- /dev/null
+++ b/gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch
@@ -0,0 +1,367 @@
+From 60381e4add64dddbd07e78248b2b0f819eb2776e Mon Sep 17 00:00:00 2001
+From: Peter Robinson <address@hidden>
+Date: Mon, 20 Apr 2020 20:27:36 +0100
+Origin: https://patchwork.ozlabs.org/project/uboot/patch/address@hidden/
+Subject: [PATCH 5/5] Add initial support for the Pinebook Pro laptop from
+ Pine64.
+
+Specification:
+- Rockchip RK3399
+- 4GB Dual-Channel LPDDR4
+- eMMC socket
+- mSD card slot
+- 128Mbit (16Mb) SPI Flash
+- AP6256 for 11AC WiFi + BT5
+- 14 inch 1920*1080 eDP MiPi display
+- Camera
+- USB 3.0, 2.0 ports
+- Type-C port with alt-mode display (DP 1.2) and 15W charge
+- DC 5V/3A
+- optional PCIe slot for NVMe SSD drive
+
+Signed-off-by: Peter Robinson <address@hidden>
+---
+ arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 43 ++++++++++
+ arch/arm/mach-rockchip/rk3399/Kconfig | 8 ++
+ board/pine64/pinebook-pro-rk3399/Kconfig | 15 ++++
+ board/pine64/pinebook-pro-rk3399/MAINTAINERS | 8 ++
+ board/pine64/pinebook-pro-rk3399/Makefile | 1 +
+ .../pinebook-pro-rk3399/pinebook-pro-rk3399.c | 76 +++++++++++++++++
+ configs/pinebook-pro-rk3399_defconfig | 84 +++++++++++++++++++
+ include/configs/pinebook-pro-rk3399.h | 29 +++++++
+ 8 files changed, 264 insertions(+)
+ create mode 100644 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+ create mode 100644 board/pine64/pinebook-pro-rk3399/Kconfig
+ create mode 100644 board/pine64/pinebook-pro-rk3399/MAINTAINERS
+ create mode 100644 board/pine64/pinebook-pro-rk3399/Makefile
+ create mode 100644 board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
+ create mode 100644 configs/pinebook-pro-rk3399_defconfig
+ create mode 100644 include/configs/pinebook-pro-rk3399.h
+
+diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+new file mode 100644
+index 0000000000..1a2e24d3ef
+--- /dev/null
++++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+@@ -0,0 +1,43 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
++ */
++
++#include "rk3399-u-boot.dtsi"
++#include "rk3399-sdram-lpddr4-100.dtsi"
++
++/ {
++ aliases {
++ spi0 = &spi1;
++ };
++
++ chosen {
++ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
++ };
++};
++
++&i2c0 {
++ u-boot,dm-pre-reloc;
++};
++
++&rk808 {
++ u-boot,dm-pre-reloc;
++};
++
++&sdhci {
++ max-frequency = <25000000>;
++ u-boot,dm-pre-reloc;
++};
++
++&sdmmc {
++ max-frequency = <20000000>;
++ u-boot,dm-pre-reloc;
++};
++
++&spiflash {
++ u-boot,dm-pre-reloc;
++};
++
++&vdd_log {
++ regulator-init-microvolt = <950000>;
++};
+diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig
b/arch/arm/mach-rockchip/rk3399/Kconfig
+index 927bb62a9f..254b9c5b4d 100644
+--- a/arch/arm/mach-rockchip/rk3399/Kconfig
++++ b/arch/arm/mach-rockchip/rk3399/Kconfig
+@@ -19,6 +19,13 @@ config TARGET_EVB_RK3399
+ with full function and physical connectors support like Type-C ports,
+ USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
+
++config TARGET_PINEBOOK_PRO_RK3399
++ bool "Pinebook Pro"
++ help
++ Pinebook Pro is a laptop based on the Rockchip rk3399 SoC
++ with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
++ 1920*1080 screen and all the usual laptop features.
++
+ config TARGET_PUMA_RK3399
+ bool "Theobroma Systems RK3399-Q7 (Puma)"
+ help
+@@ -144,6 +151,7 @@ endif # BOOTCOUNT_LIMIT
+
+ source "board/firefly/roc-pc-rk3399/Kconfig"
+ source "board/google/gru/Kconfig"
++source "board/pine64/pinebook-pro-rk3399/Kconfig"
+ source "board/pine64/rockpro64_rk3399/Kconfig"
+ source "board/rockchip/evb_rk3399/Kconfig"
+ source "board/theobroma-systems/puma_rk3399/Kconfig"
+diff --git a/board/pine64/pinebook-pro-rk3399/Kconfig
b/board/pine64/pinebook-pro-rk3399/Kconfig
+new file mode 100644
+index 0000000000..3bb7ca448e
+--- /dev/null
++++ b/board/pine64/pinebook-pro-rk3399/Kconfig
+@@ -0,0 +1,15 @@
++if TARGET_PINEBOOK_PRO_RK3399
++
++config SYS_BOARD
++ default "pinebook-pro-rk3399"
++
++config SYS_VENDOR
++ default "pine64"
++
++config SYS_CONFIG_NAME
++ default "pinebook-pro-rk3399"
++
++config BOARD_SPECIFIC_OPTIONS
++ def_bool y
++
++endif
+diff --git a/board/pine64/pinebook-pro-rk3399/MAINTAINERS
b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
+new file mode 100644
+index 0000000000..7153eaf2e0
+--- /dev/null
++++ b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
+@@ -0,0 +1,8 @@
++PINEBOOK_PRO
++M: Peter Robinson <pbrobinson at gmail.com>
++S: Maintained
++F: board/pine64/rk3399-pinebook-pro/
++F: include/configs/rk3399-pinebook-pro.h
++F: arch/arm/dts/rk3399-pinebook-pro.dts
++F: arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
++F: configs/pinebook-pro-rk3399_defconfig
+diff --git a/board/pine64/pinebook-pro-rk3399/Makefile
b/board/pine64/pinebook-pro-rk3399/Makefile
+new file mode 100644
+index 0000000000..2f692a12a6
+--- /dev/null
++++ b/board/pine64/pinebook-pro-rk3399/Makefile
+@@ -0,0 +1 @@
++obj-y += pinebook-pro-rk3399.o
+diff --git a/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
+new file mode 100644
+index 0000000000..01421cbac2
+--- /dev/null
++++ b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
+@@ -0,0 +1,76 @@
++/*
++ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
++ * (C) Copyright 2020 Peter Robinson <pbrobinson at gmail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <dm.h>
++#include <syscon.h>
++#include <asm/io.h>
++#include <asm/arch-rockchip/clock.h>
++#include <asm/arch-rockchip/grf_rk3399.h>
++#include <asm/arch-rockchip/hardware.h>
++#include <asm/arch-rockchip/misc.h>
++#include <power/regulator.h>
++
++#define GRF_IO_VSEL_BT565_SHIFT 0
++#define PMUGRF_CON0_VSEL_SHIFT 8
++
++#ifndef CONFIG_SPL_BUILD
++int board_early_init_f(void)
++{
++ struct udevice *regulator;
++ int ret;
++
++ ret = regulator_get_by_platname("vcc5v0_usb", ®ulator);
++ if (ret) {
++ debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);
++ goto out;
++ }
++
++ ret = regulator_set_enable(regulator, true);
++ if (ret)
++ debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__,
ret);
++
++out:
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_MISC_INIT_R
++static void setup_iodomain(void)
++{
++ struct rk3399_grf_regs *grf =
++ syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
++ struct rk3399_pmugrf_regs *pmugrf =
++ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
++
++ /* BT565 is in 1.8v domain */
++ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
++
++ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
++ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
++}
++
++int misc_init_r(void)
++{
++ const u32 cpuid_offset = 0x7;
++ const u32 cpuid_length = 0x10;
++ u8 cpuid[cpuid_length];
++ int ret;
++
++ setup_iodomain();
++
++ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
++ if (ret)
++ return ret;
++
++ ret = rockchip_cpuid_set(cpuid, cpuid_length);
++ if (ret)
++ return ret;
++
++ return ret;
++}
++#endif
+diff --git a/configs/pinebook-pro-rk3399_defconfig
b/configs/pinebook-pro-rk3399_defconfig
+new file mode 100644
+index 0000000000..0e9f0ec250
+--- /dev/null
++++ b/configs/pinebook-pro-rk3399_defconfig
+@@ -0,0 +1,84 @@
++CONFIG_ARM=y
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_SYS_TEXT_BASE=0x00200000
++CONFIG_ENV_OFFSET=0x3F8000
++CONFIG_ROCKCHIP_RK3399=y
++CONFIG_RAM_RK3399_LPDDR4=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART=y
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_DEBUG_UART_BASE=0xFF1A0000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SPL_SPI_SUPPORT=y
++CONFIG_SPL_SPI_FLASH_SUPPORT=y
++CONFIG_SPL_MTD_SUPPORT=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
++CONFIG_MISC_INIT_R=y
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
++CONFIG_TPL=y
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
++CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_I2C=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTDPARTS=y
++CONFIG_CMD_PMIC=y
++CONFIG_CMD_REGULATOR=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_SF=y
++CONFIG_CMD_TIME=y
++CONFIG_CMD_USB=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_BOOTDELAY=3
++CONFIG_LED=y
++CONFIG_LED_GPIO=y
++CONFIG_MISC=y
++CONFIG_ROCKCHIP_EFUSE=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_SDMA=y
++CONFIG_MMC_SDHCI_ROCKCHIP=y
++CONFIG_ROCKCHIP_SPI=y
++CONFIG_SF_DEFAULT_SPEED=20000000
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_DM_ETH=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_DM_PMIC_FAN53555=y
++CONFIG_REGULATOR_PWM=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_SYSRESET=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_DWC3=y
++# CONFIG_USB_XHCI_ROCKCHIP is not set
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_DWC3=y
++CONFIG_ROCKCHIP_USB2_PHY=y
++CONFIG_USB_HOST_ETHER=y
++CONFIG_USB_ETHER_ASIX=y
++CONFIG_USB_ETHER_RTL8152=y
++CONFIG_USB_KEYBOARD=y
++CONFIG_USE_TINY_PRINTF=y
++CONFIG_SPL_TINY_MEMSET=y
++CONFIG_ERRNO_STR=y
++CONFIG_DM_VIDEO=y
++CONFIG_VIDEO_BPP16=y
++CONFIG_VIDEO_BPP32=y
++CONFIG_DISPLAY=y
++CONFIG_VIDEO_ROCKCHIP=y
++CONFIG_DISPLAY_ROCKCHIP_EDP=y
+diff --git a/include/configs/pinebook-pro-rk3399.h
b/include/configs/pinebook-pro-rk3399.h
+new file mode 100644
+index 0000000000..423d742a79
+--- /dev/null
++++ b/include/configs/pinebook-pro-rk3399.h
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
++ * Copyright (C) 2020 Peter Robinson <pbrobinson at gmail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __PINEBOOK_PRO_RK3399_H
++#define __PINEBOOK_PRO_RK3399_H
++
++#define ROCKCHIP_DEVICE_SETTINGS \
++ "stdin=serial,usbkbd\0" \
++ "stdout=serial,vidconsole\0" \
++ "stderr=serial,vidconsole\0"
++
++#include <configs/rk3399_common.h>
++
++#if defined(CONFIG_ENV_IS_IN_MMC)
++#define CONFIG_SYS_MMC_ENV_DEV 0
++#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
++#define CONFIG_ENV_SECT_SIZE (8 * 1024)
++#endif
++
++#undef CONFIG_SYS_SPI_U_BOOT_OFFS
++#define CONFIG_SYS_SPI_U_BOOT_OFFS 1024 * 512
++
++#define SDRAM_BANK_SIZE (2UL << 30)
++
++#endif
+--
+2.20.1
+
diff --git a/gnu/packages/patches/u-boot-video-rockchip-fix-build.patch
b/gnu/packages/patches/u-boot-video-rockchip-fix-build.patch
new file mode 100644
index 0000000..ca2be8d
--- /dev/null
+++ b/gnu/packages/patches/u-boot-video-rockchip-fix-build.patch
@@ -0,0 +1,48 @@
+From ecc69ec25df07e1ce63d7add6b235b37673ed608 Mon Sep 17 00:00:00 2001
+From: Peter Robinson <address@hidden>
+Date: Mon, 20 Apr 2020 19:18:25 +0100
+Origin: https://patchwork.ozlabs.org/project/uboot/patch/address@hidden/
+Subject: [PATCH 6/6] drivers: video: rockchip: fix building eDP and LVDS
+ drivers
+
+The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in
+hardware.h so include it so the drivers build. Adjust rk_lvds.c so
+includes are in alphabetical order while updating.
+
+Signed-off-by: Peter Robinson <address@hidden>
+Reviewed-by: Anatolij Gustschin <address@hidden>
+---
+ drivers/video/rockchip/rk_edp.c | 1 +
+ drivers/video/rockchip/rk_lvds.c | 3 ++-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/video/rockchip/rk_edp.c b/drivers/video/rockchip/rk_edp.c
+index 8703df0ec0..cf84b886e7 100644
+--- a/drivers/video/rockchip/rk_edp.c
++++ b/drivers/video/rockchip/rk_edp.c
+@@ -18,6 +18,7 @@
+ #include <asm/arch-rockchip/clock.h>
+ #include <asm/arch-rockchip/edp_rk3288.h>
+ #include <asm/arch-rockchip/grf_rk3288.h>
++#include <asm/arch-rockchip/hardware.h>
+ #include <dt-bindings/clock/rk3288-cru.h>
+
+ #define MAX_CR_LOOP 5
+diff --git a/drivers/video/rockchip/rk_lvds.c
b/drivers/video/rockchip/rk_lvds.c
+index cf5c0439b1..79e24baf53 100644
+--- a/drivers/video/rockchip/rk_lvds.c
++++ b/drivers/video/rockchip/rk_lvds.c
+@@ -13,8 +13,9 @@
+ #include <asm/gpio.h>
+ #include <asm/io.h>
+ #include <asm/arch-rockchip/clock.h>
+-#include <asm/arch-rockchip/lvds_rk3288.h>
+ #include <asm/arch-rockchip/grf_rk3288.h>
++#include <asm/arch-rockchip/hardware.h>
++#include <asm/arch-rockchip/lvds_rk3288.h>
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/video/rk3288.h>
+
+--
+2.20.1
+
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- branch master updated: gnu: Add u-boot-pinebook-pro-rk3399.,
guix-commits <=