[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-devel] [bug #55602] IPv6 address auto-configuration with two diffe
From: |
yanhc |
Subject: |
[lwip-devel] [bug #55602] IPv6 address auto-configuration with two different routers will fail |
Date: |
Tue, 29 Jan 2019 08:16:38 -0500 (EST) |
User-agent: |
Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/71.0.3578.98 Safari/537.36 |
URL:
<https://savannah.nongnu.org/bugs/?55602>
Summary: IPv6 address auto-configuration with two different
routers will fail
Project: lwIP - A Lightweight TCP/IP stack
Submitted by: yanhc
Submitted on: Tue 29 Jan 2019 01:16:36 PM UTC
Category: IPv6
Severity: 3 - Normal
Item Group: Faulty Behaviour
Status: None
Privacy: Public
Assigned to: None
Open/Closed: Open
Discussion Lock: Any
Planned Release: None
lwIP version: 2.1.0
_______________________________________________________
Details:
Hi, all.
My experiment is to test lwip 2.1.2 IPv6 address auto-configuration with two
different routers.
And check whether IPv6 address auto-configuration is successful.
Unfortunately, the test failed.
My test board is running lwip2.1.2 and there are 3 IPv6 address for the
Ethernet netif.
Slot 0 is link local, slot 1 is for global address, slot 2 is for
auto-configured address.
My test board can setup auto-configuration IPv6 address with the Router 1 with
valid time of 604800 seconds(7 days).
The following address is the auto-configured address 1 with valid time of
604054.
FC00::D51:200:DFF:FE41:1, 604054
When I unplug the Ethernet cable, the auto-configured address 1 with prefix of
Router 1 is still there and the valid time is counting down.
FC00::D51:200:DFF:FE41:1, 604038
When I plug the Ethernet cable to the Router 2, no new auto-configured IPv6
address will be generated for prefix of Router 2(FC00:0:0:5B1::/64).
I think when the valid time of auto-configured address 1 is expired, another
new address with prefix of Router 2 may generated.
But, this is 7 days later which is not reasonable.
I used the same procedure to test my laptop which is windows 10 with IPv6
auto-configuration enabled on Ethernet interface.
I connected my laptop to the two Routers one by one, everything works fine.
I notice that when I connect my laptop to Router 2, the valid time of the
auto-configuration IPv6 address with prefix of Router 1 is reduced to 3
seconds from a 6 days.
And after 3 seconds, the former auto-configured address is disappear and new
auto-configured address is generated with prefix of Router 2.
The procedure is as follows:
Interface 16: Ethernet 5
Address type DAD Valid time Preferred time Address
--------- ----------- ---------- ---------- ------------------------
Public No 6d23h59m50s 23h59m50s
fc00::d51:8c79:e4f9:f5a3:e5eb
Tentative No 6d23h59m44s 23h57m15s
fc00::d51:9146:165c:cb7f:f35a
Other No infinite infinite fe80::8c79:e4f9:f5a3:e5eb%16
Interface 16: Ethernet 5
Address type DAD Valid time Preferred time Address
--------- ----------- ---------- ---------- ------------------------
Public Preferred 3s 3s
fc00::d51:8c79:e4f9:f5a3:e5eb
Tentative Preferred 3s 3s
fc00::d51:9146:165c:cb7f:f35a
Other Preferred infinite infinite
fe80::8c79:e4f9:f5a3:e5eb%16
Interface 16: Ethernet 5
Address type DAD Valid time Preferred time Address
--------- ----------- ---------- ---------- ------------------------
Public Preferred 6d23h59m59s 23h59m59s
fc00::5b1:8c79:e4f9:f5a3:e5eb
Tentative Preferred 6d23h59m59s 23h57m30s
fc00::5b1:b0de:2e31:256f:afcd
Other Preferred infinite infinite
fe80::8c79:e4f9:f5a3:e5eb%16
>From the test, we can see that when a new router is connected, windows 10 will
set the valid time of the former prefix to 3 seconds to make it expired
quickly,
then new address will be generated.
So, how to make lwip behave like windows 10 under such circumstances?
_______________________________________________________
Reply to this item at:
<https://savannah.nongnu.org/bugs/?55602>
_______________________________________________
Message sent via Savannah
https://savannah.nongnu.org/
- [lwip-devel] [bug #55602] IPv6 address auto-configuration with two different routers will fail,
yanhc <=