LYNX-DEV looking for patient individual who is using a mouse with lynx

[Larry W. Virden, x2487]

I am using lynx 2.7.1 0.84 on SPARC Solaris 2.4/Sun C compiler/ncurses 4.1/
in an rxvt window.

When I use trn in the rxvt window, I get mouse behavior.

When I use lynx in the rxvt window, I do not seem to get mouse behavior. 

Here is the terminfo entry being used.

#       Reconstructed via infocmp from file: /home/lwv26/.ti/r/rxvt
rxvt|rxvt terminal emulator (X Window System), 
        am, bce, eo, km, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#24, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
        dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
        flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, 
        hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 
        ind=^J, is1=\E[?47l\E=\E[?1l, 
        is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, 
        kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, 
        kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, 
        kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 
        kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
        kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
        kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, 
        kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, 
        rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[?47l\E8, rmir=\E[4l, 
        rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 
        rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 
        rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 
        s0ds=\E(B, s1ds=\E(0, sc=\E7, 
        
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
 
        sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 
        smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
        vpa=\E[%i%p1%dd, 


I have 
USE_MOUSE: TRUE
in my lynx.cfg file.

When I bring up the lynx window, I try clicking using the mouse and nothing
happens.  Nothing appears to be written out to the trace file either.

I would appreciate it if someone who is actually using lynx with a mouse
on a Unix system could give me some pointers on things to try to see what
I need to do to get things to work properly.

Thanks.
-- 
Larry W. Virden                 INET: address@hidden
<URL:http://www.teraform.com/%7Elvirden/> <*> O- "We are all Kosh."
Unless explicitly stated to the contrary, nothing in this posting should 
be construed as representing my employer's opinions.
;
; To UNSUBSCRIBE:  Send a mail message to address@hidden
;                  with "unsubscribe lynx-dev" (without the
;                  quotation marks) on a line by itself.
;