[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LYNX-DEV Using Doslynx with modems
From: |
Doug Kaufman |
Subject: |
Re: LYNX-DEV Using Doslynx with modems |
Date: |
Wed, 25 Mar 1998 07:52:12 -0800 (PST) |
On Wed, 25 Mar 1998, Yacine BELLIK wrote:
> I'd like to use doslynx with a modem connection to the internet,
> and i have 3 questions :
> ...
> Is there any solution to use Doslynx with a modem connection to internet ?
The first thing is to not use Doslynx; it is of historic interest only
at this point. If you have a 286 machine, you need bobcat. If you have
a 386 or better machine, you need the DOS port of lynx. Information
about bobcat and the lynx DOS port can be found at:
"http://www.fdisk.com/doslynx/bobcat.htm"
"http://www.fdisk.com/doslynx/lynxport.htm"
You can see the package of lynx for DOS (386 or greater) that I put
together at:
"http://www.rahul.net/dkaufman/lynx2.8rel.3-DOS.zip" or
"ftp://ftp.rahul.net/pub/dkaufman/lynx2.8rel.3-DOS.zip".
The README.DOS file should answer most of your questions.
Doug
__
Doug Kaufman
Internet: address@hidden (preferred)
address@hidden