# $JOBUK/conf/lynx.cfg
#
# Lynx configuration for the project jobfeed_uk.
#
# Definition pairs are of the form  VARIABLE:DEFINITION
# NO spaces are allowed between the pair items.
#
#  If you do not have write access to /usr/local/lib you may change
#  the default location of this file in the userdefs.h file and recompile,
#  or specify its location on the command line with the "-cfg"
#  command line option.
#
# Items may be commented out by putting a '#' as the FIRST char of the line
# (Any line beginning with punctuation is ignored).  Leading blanks on each
# line are ignored; trailing blanks may be significant depending on the option.

# An HTML'ized description of all settings (based on comments in this file,
# with alphabetical table of settings and with table of settings by category)
# is available at http://www.hippo.ru/~hvv/lynxcfg_toc.html
#
### The conversion is done via the scripts/cfg2html.pl script.
### Several directives beginning with '.' are used for this purpose.

INCLUDE:/etc/lynx.cfg

# CHARACTER_SET defines the display character set, i.e., assumed to be
# installed on the user's terminal.  It determines which characters or strings
# will be used to represent 8-bit character entities within HTML.  New
# character sets may be defined as explained in the README files of the
# src/chrtrans directory in the Lynx source code distribution.  For Asian (CJK)
# character sets, it also determines how Kanji code will be handled.  The
# default is defined in userdefs.h and can be changed here or via the
# 'o'ptions menu.  The 'o'ptions menu setting will be stored in the user's RC
# file whenever those settings are saved, and thereafter will be used as the
# default.  For Lynx a "character set" has two names:  a MIME name (for
# recognizing properly labeled charset parameters in HTTP headers etc.), and a
# human-readable string for the 'O'ptions Menu (so you may find info about
# language or group of languages besides MIME name).  Not all 'human-readable'
# names correspond to exactly one valid MIME charset (example is "Chinese");
# in that case an appropriate valid (and more specific) MIME name should be
# used where required.  Well-known synonyms are also processed in the code.
#
# Raw (CJK) mode
#
# Lynx normally translates characters from a document's charset to display
# charset, using ASSUME_CHARSET value (see below) if the document's charset
# is not specified explicitly.  Raw (CJK) mode is OFF for this case.
# When the document charset is specified explicitly, that charset
# overrides any assumption like ASSUME_CHARSET or raw (CJK) mode.
#
# For the Asian (CJK) display character sets, the corresponding charset is
# assumed in documents, i.e., raw (CJK) mode is ON by default.  In raw CJK
# mode, 8-bit characters are not reverse translated in relation to the entity
# conversion arrays, i.e., they are assumed to be appropriate for the display
# character set.  The mode should be toggled OFF when an Asian (CJK) display
# character set is selected but the document is not CJK and its charset not
# specified explicitly.
#
# Raw (CJK) mode may be toggled by user via '@' (LYK_RAW_TOGGLE) key,
# the -raw command line switch or from the 'o'ptions menu.
#
# Raw (CJK) mode effectively changes the charset assumption about unlabeled
# documents.  You can toggle raw mode ON if you believe the document has a
# charset which does correspond to your Display Character Set.  On the other
# hand, if you set ASSUME_CHARSET the same as Display Character Set you get raw
# mode ON by default (but you get assume_charset=iso-8859-1 if you try raw mode
# OFF after it).
#
# Note that "raw" does not mean that every byte will be passed to the screen.
# HTML character entities may get expanded and translated, inappropriate
# control characters filtered out, etc.  There is a "Transparent" pseudo
# character set for more "rawness".
#
# Since Lynx now supports a wide range of platforms it may be useful to note
# the cpXXX codepages used by IBM PC compatible computers, and windows-xxxx
# used by native MS-Windows apps.  We also note that cpXXX pages rarely are
# found on Internet, but are mostly for local needs on DOS.
#
# Recognized character sets include:
#
#    string for 'O'ptions Menu          MIME name
#    ===========================        =========
#    7 bit approximations (US-ASCII)    us-ascii
#    Western (ISO-8859-1)               iso-8859-1
#    Western (ISO-8859-15)              iso-8859-15
#    Western (cp850)                    cp850
#    Western (windows-1252)             windows-1252
#    IBM PC US codepage (cp437)         cp437
#    DEC Multinational                  dec-mcs
#    Macintosh (8 bit)                  macintosh
#    NeXT character set                 next
#    HP Roman8                          hp-roman8
#    Chinese                            euc-cn
#    Japanese (EUC-JP)                  euc-jp
#    Japanese (Shift_JIS)               shift_jis
#    Korean                             euc-kr
#    Taipei (Big5)                      big5
#    Vietnamese (VISCII)                viscii
#    Eastern European (ISO-8859-2)      iso-8859-2
#    Eastern European (cp852)           cp852
#    Eastern European (windows-1250)    windows-1250
#    Latin 3 (ISO-8859-3)               iso-8859-3
#    Latin 4 (ISO-8859-4)               iso-8859-4
#    Baltic Rim (cp775)                 cp775
#    Baltic Rim (windows-1257)          windows-1257
#    Cyrillic (ISO-8859-5)              iso-8859-5
#    Cyrillic (cp866)                   cp866
#    Cyrillic (windows-1251)            windows-1251
#    Cyrillic (KOI8-R)                  koi8-r
#    Arabic (ISO-8859-6)                iso-8859-6
#    Arabic (cp864)                     cp864
#    Arabic (windows-1256)              windows-1256
#    Greek (ISO-8859-7)                 iso-8859-7
#    Greek (cp737)                      cp737
#    Greek2 (cp869)                     cp869
#    Greek (windows-1253)               windows-1253
#    Hebrew (ISO-8859-8)                iso-8859-8
#    Hebrew (cp862)                     cp862
#    Hebrew (windows-1255)              windows-1255
#    Turkish (ISO-8859-9)               iso-8859-9
#    ISO-8859-10                        iso-8859-10
#    Ukrainian Cyrillic (cp866u)        cp866u
#    Ukrainian Cyrillic (KOI8-U)        koi8-u
#    UNICODE (UTF-8)                    utf-8
#    RFC 1345 w/o Intro                 mnemonic+ascii+0
#    RFC 1345 Mnemonic                  mnemonic
#    Transparent                        x-transparent
#
# The value should be the MIME name of a character set recognized by
# Lynx (case insensitive).
# Find RFC 1345 at http://www.ics.uci.edu/pub/ietf/uri/rfc1345.txt .
#
CHARACTER_SET:utf-8
#CHARACTER_SET:iso-8859-1

# LOCALE_CHARSET overrides CHARACTER_SET if true, using the current locale to
# lookup a MIME name that corresponds, and use that as the display charset. 
# This feature is experimental because while nl_langinfo(CODESET) itself is
# standardized, the return values and their relationship to the locale value is
# not.  GNU libiconv happens to give useful values, but other implementations
# are not guaranteed to do this.
LOCALE_CHARSET:FALSE


# ASSUME_CHARSET changes the handling of documents which do not
# explicitly specify a charset.  Normally Lynx assumes that 8-bit
# characters in those documents are encoded according to iso-8859-1
# (the official default for the HTTP protocol).  When ASSUME_CHARSET
# is defined here or by an -assume_charset command line flag is in effect,
# Lynx will treat documents as if they were encoded accordingly.
# See above on how this interacts with "raw mode" and the Display
# Character Set.
# ASSUME_CHARSET can also be changed via the 'o'ptions menu but will
# not be saved as permanent value in user's .lynxrc file to avoid more chaos.
#
ASSUME_CHARSET:utf-8


# ASSUME_LOCAL_CHARSET is like ASSUME_CHARSET but only applies to local
# files.  If no setting is given here or by an -assume_local_charset
# command line option, the value for ASSUME_CHARSET or -assume_charset
# is used.  It works for both text/plain and text/html files.
# This option will ignore "raw mode" toggling when local files are viewed
# (it is "stronger" than "assume_charset" or the effective change
# of the charset assumption caused by changing "raw mode"),
# so only use when necessary.
#
#ASSUME_LOCAL_CHARSET:utf-8


# If Lynx encounters a charset parameter it doesn't recognize, it will
# replace the value given by ASSUME_UNREC_CHARSET (or a corresponding
# -assume_unrec_charset command line option) for it.  This can be used
# to deal with charsets unknown to Lynx, if they are "sufficiently
# similar" to one that Lynx does know about, by forcing the same
# treatment.  There is no default, and you probably should leave this
# undefined unless necessary.
#
ASSUME_UNREC_CHARSET:utf-8

# If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial BR tags.
# If set TRUE, two or more concurrent BRs will be collapsed into a single
# line break.  Note that the valid way to insert extra blank lines in HTML
# is via a PRE block with only newlines in the block.
#
#COLLAPSE_BR_TAGS:TRUE


# If TAGSOUP is set, Lynx uses the "Tag Soup DTD" rather than "SortaSGML".
# The two approaches differ by the style of error detection and recovery.
# Tag Soup DTD allows for improperly nested tags; SortaSGML is stricter.
#TAGSOUP:FALSE


# VERBOSE_IMAGES controls whether Lynx replaces [LINK], [INLINE] and [IMAGE]
# (for images without ALT) with filenames of these images.
# This can be useful in determining what images are important
# and which are mere decorations, e.g. button.gif, line.gif,
# provided the author uses meaningful names.
#
# The definition here will override the setting in userdefs.h.
#
VERBOSE_IMAGES:FALSE


# If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links
# which can be ACTIVATEd.  For inlines, the ALT or pseudo-ALT ("[INLINE]")
# strings will be links for the resolved SRC rather than just text.
# For ISMAP or other graphic links, ALT or pseudo-ALT ("[ISMAP]" or "[LINK]")
# will have '-' and a link labeled "[IMAGE]" for the resolved SRC appended.
# See also VERBOSE_IMAGES flag.
#
# The definition here will override that in userdefs.h
# and can be toggled via an "-image_links" command-line switch.
# The user can also use the LYK_IMAGE_TOGGLE key (default `*')
# or `Show Images' in the Form-based Options Menu.
#
#MAKE_LINKS_FOR_ALL_IMAGES:FALSE

# If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which don't specify
# an ALT string will not have "[INLINE]" inserted as a pseudo-ALT,
# i.e. they'll be treated as having ALT="".
# Otherwise (if TRUE), pseudo-ALTs will be created for inlines,
# so that they can be used as links to the SRCs.
# See also VERBOSE_IMAGES flag.
#
# The definition here will override that in userdefs.h
# and can be toggled via a "-pseudo_inlines" command-line switch.
# The user can also use the LYK_INLINE_TOGGLE key (default `[')
# or `Show Images' in the Form-based Options Menu.
#
#MAKE_PSEUDO_ALTS_FOR_INLINES:TRUE


# If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used
# for emphasis tags in dumps.
#
# The default defined here will override that in userdefs.h, and the user
# can toggle the default via a "-underscore" command line switch.
#
#SUBSTITUTE_UNDERSCORES:FALSE


# If HISTORICAL_COMMENTS is TRUE, Lynx will revert to the "Historical"
# behavior of treating any '>' as a terminator for comments, instead of
# seeking a valid '-->' terminator (note that white space can be present
# between the '--' and '>' in valid terminators).  The compilation default
# is FALSE.
#
# The compilation default, or default defined here, can be toggled via a
# "-historical" command line switch, and via the LYK_HISTORICAL command key.
#
#HISTORICAL_COMMENTS:FALSE


# If MINIMAL_COMMENTS is TRUE, Lynx will not use Valid comment parsing
# of '--' pairs as serial comments within an overall comment element,
# and instead will seek only a '-->' terminator for the overall comment
# element.  This emulates the Netscape v2.0 comment parsing bug, and
# will help Lynx cope with the use of dashes as "decorations", which
# consequently has become common in so-called "Enhanced for Netscape"
# pages.  Note that setting Historical comments on will override the
# Minimal or Valid setting.
#
# The compilation default for MINIMAL_COMMENTS is FALSE, but we'll
# set it TRUE here, until Netscape gets its comment parsing right,
# and "decorative" dashes cease to be so common.
#
# The compilation default, or default defined here, can be toggled via a
# "-minimal" command line switch, and via the LYK_MINIMAL command key.
#
MINIMAL_COMMENTS:TRUE


# If SOFT_DQUOTES is TRUE, Lynx will emulate the invalid behavior of
# treating '>' as a co-terminator of a double-quoted attribute value
# and the tag which contains it, as was done in old versions of Netscape
# and Mosaic.  The compilation default is FALSE.
#
# The compilation default, or default defined here, can be toggled via
# a "-soft_dquotes" command line switch.
#
#SOFT_DQUOTES:FALSE


# HIDDEN_LINK_MARKER - HTML parsing
# This option defines the string that will be used as title of hidden link (a
# link that otherwise will have no label associated with it).  Using an empty
# string as the value will cause lynx to behave in the old way - hidden links
# will be handled according to other settings (mostly the parameter of
# --hiddenlinks command-line switch).  If the value is non-empty string, hidden
# link becomes non-hidden so it won't be handled as hidden link, e.g., listed
# among hidden links on 'l'isting page.
#
#HIDDEN_LINK_MARKER:

# JUSTIFY - Appearance
# This option mirrors command-line option with same name.  Default is TRUE.  If
# true, most of text (except headers and like this) will be justified.  This
# has no influence on CJK text rendering.
#
# This option is only available if Lynx was compiled with EXP_JUSTIFY_ELTS.
#
JUSTIFY:FALSE

# JUSTIFY_MAX_VOID_PERCENT - Appearance
# This option controls the maximum allowed value for ratio (in percents) of
# 'the number of spaces to spread across the line to justify it' to
# 'max line size for current style and nesting' when justification is allowed.
# When that ratio exceeds the value specified, that particular line won't be
# justified. I.e. the value 28 for this setting will mean maximum value for
# that ratio is 0.28.
#
#JUSTIFY_MAX_VOID_PERCENT:35