Changes to m4/install-sh [branch-1_4]

[Eric Blake]

Index: m4/install-sh
diff -u m4/install-sh:1.1.1.1.2.3 m4/install-sh:removed
--- m4/install-sh:1.1.1.1.2.3   Wed May 10 04:44:21 2006
+++ m4/install-sh       Mon May 29 19:43:04 2006
@@ -1,420 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-04-25.22
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Symbolic mode for testing mkdir with directories.
-# It is the same as 755, but also tests that "u+" works.
-test_mode=u=rwx,g=rx,o=rx,u+wx
-
-# Desired mode of installed file.
-mode=0755
-
-# Desired mode of newly created intermediate directories.
-# It is empty if not known yet.
-intermediate_mode=
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-       shift
-       shift
-       continue;;
-
-    -T) no_target_directory=true
-       shift
-       continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)        shift
-       break;;
-
-    -*)        echo "$0: invalid option: $1" >&2
-       exit 1;;
-
-    *)  break;;
-  esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from 
address@hidden
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-       echo "$0: $dstarg: Is a directory" >&2
-       exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-       (dirname "$dst") 2>/dev/null ||
-       expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-            X"$dst" : 'X\(//\)[^/]' \| \
-            X"$dst" : 'X\(//\)$' \| \
-            X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-       echo X"$dst" |
-           sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-                  s//\1/
-                  q
-                }
-                /^X\(\/\/\)[^/].*/{
-                  s//\1/
-                  q
-                }
-                /^X\(\/\/\)$/{
-                  s//\1/
-                  q
-                }
-                /^X\(\/\).*/{
-                  s//\1/
-                  q
-                }
-                s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-       posix_mkdir=false
-       if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
-         posix_mkdir=true
-       else
-         # Remove any dirs left behind by ancient mkdir implementations.
-         rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
-       fi ;;
-    esac
-
-    if
-      $posix_mkdir && {
-
-       # With -d, create the new directory with the user-specified mode.
-       # Otherwise, create it using the same intermediate mode that
-       # mkdir -p would use when creating intermediate directories.
-       # POSIX says that this mode is "$(umask -S),u+wx", so use that
-       # if umask -S works.
-
-       if test -n "$dir_arg"; then
-         mkdir_mode=$mode
-       else
-         case $intermediate_mode in
-           '')
-             if umask_S=`(umask -S) 2>/dev/null`; then
-               intermediate_mode=$umask_S,u+wx
-             else
-               intermediate_mode=$test_mode
-             fi ;;
-         esac
-         mkdir_mode=$intermediate_mode
-       fi
-
-       $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
-      }
-    then :
-    else
-
-      # mkdir does not conform to POSIX, or it failed possibly due to
-      # a race condition.  Create the directory the slow way, step by
-      # step, checking for races as we go.
-
-      case $dstdir in
-       /*) pathcomp=/ ;;
-       -*) pathcomp=./ ;;
-       *)  pathcomp= ;;
-      esac
-
-      case $posix_glob in
-        '')
-         if (set -f) 2>/dev/null; then
-           posix_glob=true
-         else
-           posix_glob=false
-         fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      for d
-      do
-       test "x$d" = x && continue
-
-       pathcomp=$pathcomp$d
-       if test ! -d "$pathcomp"; then
-         $mkdirprog "$pathcomp"
-         # Don't fail if two instances are running concurrently.
-         test -d "$pathcomp" || exit 1
-       fi
-       pathcomp=$pathcomp/
-      done
-      obsolete_mkdir_used=true
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-          # The rename failed, perhaps because mv can't rename something else
-          # to itself, or perhaps because mv is so ancient that it does not
-          # support -f.
-
-          # Now remove or move aside any old file at destination location.
-          # We try this two ways since rm can't unlink itself on some
-          # systems and the destination file might be busy for other
-          # reasons.  In this case, the final cleanup might fail but the new
-          # file should still install successfully.
-          {
-            if test -f "$dst"; then
-              $doit $rmcmd -f "$dst" 2>/dev/null \
-              || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-                    && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-              || {
-                echo "$0: cannot unlink or rename $dst" >&2
-                (exit 1); exit 1
-              }
-            else
-              :
-            fi
-          } &&
-
-          # Now rename the file to the real destination.
-          $doit $mvcmd "$dsttmp" "$dst"
-        }
-    } || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End: