[Qemu-arm] [PATCH 07/11] tests/microbit-test: Add Tests for nRF51 GPIO

[Stefan Hajnoczi]

From: Steffen Görtz <address@hidden>

The test suite for the nRF51 GPIO peripheral for now
only tests initial state. Additionally a set of
tests testing an implementation detail of the model
are included.

Signed-off-by: Steffen Görtz <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>
Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 tests/Makefile.include |   2 +
 tests/microbit-test.c  | 160 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 tests/microbit-test.c

diff --git a/tests/Makefile.include b/tests/Makefile.include
index 3f5a1d0c30..9c84bbd829 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -277,6 +277,7 @@ check-qtest-sparc64-y += tests/boot-serial-test$(EXESUF)
 check-qtest-arm-y += tests/tmp105-test$(EXESUF)
 check-qtest-arm-y += tests/pca9552-test$(EXESUF)
 check-qtest-arm-y += tests/ds1338-test$(EXESUF)
+check-qtest-arm-y += tests/microbit-test$(EXESUF)
 check-qtest-arm-y += tests/m25p80-test$(EXESUF)
 check-qtest-arm-y += tests/virtio-blk-test$(EXESUF)
 check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF)
@@ -708,6 +709,7 @@ tests/pxe-test$(EXESUF): tests/pxe-test.o 
tests/boot-sector.o $(libqos-obj-y)
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y)
 tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y)
+tests/microbit-test$(EXESUF): tests/microbit-test.o
 tests/m25p80-test$(EXESUF): tests/m25p80-test.o
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
 tests/q35-test$(EXESUF): tests/q35-test.o $(libqos-pc-obj-y)
diff --git a/tests/microbit-test.c b/tests/microbit-test.c
new file mode 100644
index 0000000000..535714797a
--- /dev/null
+++ b/tests/microbit-test.c
@@ -0,0 +1,160 @@
+ /*
+ * QTest testcase for Microbit board using the Nordic Semiconductor nRF51 SoC.
+ *
+ * nRF51:
+ * Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
+ * Product Spec: http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.1.pdf
+ *
+ * Microbit Board: http://microbit.org/
+ *
+ * Copyright 2018 Steffen Görtz <address@hidden>
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+
+#include "qemu/osdep.h"
+#include "exec/hwaddr.h"
+#include "libqtest.h"
+
+#include "hw/arm/nrf51.h"
+#include "hw/gpio/nrf51_gpio.h"
+
+static void test_nrf51_gpio(void)
+{
+    size_t i;
+    uint32_t actual, expected;
+
+    struct {
+        hwaddr addr;
+        uint32_t expected;
+    } const reset_state[] = {
+        {NRF51_GPIO_REG_OUT, 0x00000000}, {NRF51_GPIO_REG_OUTSET, 0x00000000},
+        {NRF51_GPIO_REG_OUTCLR, 0x00000000}, {NRF51_GPIO_REG_IN, 0x00000000},
+        {NRF51_GPIO_REG_DIR, 0x00000000}, {NRF51_GPIO_REG_DIRSET, 0x00000000},
+        {NRF51_GPIO_REG_DIRCLR, 0x00000000}
+    };
+
+    /* Check reset state */
+    for (i = 0; i < ARRAY_SIZE(reset_state); i++) {
+        expected = reset_state[i].expected;
+        actual = readl(NRF51_GPIO_BASE + reset_state[i].addr);
+        g_assert_cmpuint(actual, ==, expected);
+    }
+
+    for (i = 0; i < NRF51_GPIO_PINS; i++) {
+        expected = 0x00000002;
+        actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START + i * 4);
+        g_assert_cmpuint(actual, ==, expected);
+    }
+
+    /* Check dir bit consistency between dir and cnf */
+    /* Check set via DIRSET */
+    expected = 0x80000001;
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRSET, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+    g_assert_cmpuint(actual, ==, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+
+    /* Check clear via DIRCLR */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+    g_assert_cmpuint(actual, ==, 0x00000000);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+
+    /* Check set via DIR */
+    expected = 0x80000001;
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
+    g_assert_cmpuint(actual, ==, expected);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+
+    /* Reset DIR */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000);
+
+    /* Check Input propagates */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+
+    /* Check pull-up working */
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+
+    /* Check pull-down working */
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
+
+    /* Check Output propagates */
+    irq_intercept_out("/machine/nrf51");
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0011);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+    g_assert_true(get_irq(0));
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
+    g_assert_false(get_irq(0));
+
+    /* Check self-stimulation */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x01);
+
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
+    actual = readl(NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
+    g_assert_cmpuint(actual, ==, 0x00);
+
+    /*
+     * Check short-circuit - generates an guest_error which must be checked
+     * manually as long as qtest can not scan qemu_log messages
+     */
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
+    writel(NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
+    qtest_set_irq_in(global_qtest, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
+}
+
+int main(int argc, char **argv)
+{
+    int ret;
+
+    g_test_init(&argc, &argv, NULL);
+
+    global_qtest = qtest_initf("-machine microbit");
+
+    qtest_add_func("/microbit/nrf51/gpio", test_nrf51_gpio);
+
+    ret = g_test_run();
+
+    qtest_quit(global_qtest);
+    return ret;
+}
-- 
2.19.2