Re: [Qemu-arm] [Qemu-devel] [PATCH v7 00/17] ARM virt: Initial RAM expansion and PCDIMM/NVDIMM support

[Auger Eric]

Hi Igor,

On 2/22/19 5:27 PM, Igor Mammedov wrote:
> On Wed, 20 Feb 2019 23:39:46 +0100
> Eric Auger <address@hidden> wrote:
> 
>> This series aims to bump the 255GB RAM limit in machvirt and to
>> support device memory in general, and especially PCDIMM/NVDIMM.
>>
>> In machvirt versions < 4.0, the initial RAM starts at 1GB and can
>> grow up to 255GB. From 256GB onwards we find IO regions such as the
>> additional GICv3 RDIST region, high PCIe ECAM region and high PCIe
>> MMIO region. The address map was 1TB large. This corresponded to
>> the max IPA capacity KVM was able to manage.
>>
>> Since 4.20, the host kernel is able to support a larger and dynamic
>> IPA range. So the guest physical address can go beyond the 1TB. The
>> max GPA size depends on the host kernel configuration and physical CPUs.
>>
>> In this series we use this feature and allow the RAM to grow without
>> any other limit than the one put by the host kernel.
>>
>> The RAM still starts at 1GB. First comes the initial ram (-m) of size
>> ram_size and then comes the device memory (,maxmem) of size
>> maxram_size - ram_size. The device memory is potentially hotpluggable
>> depending on the instantiated memory objects.
>>
>> IO regions previously located between 256GB and 1TB are moved after
>> the RAM. Their offset is dynamically computed, depends on ram_size
>> and maxram_size. Size alignment is enforced.
>>
>> In case maxmem value is inferior to 255GB, the legacy memory map
>> still is used. The change of memory map becomes effective from 4.0
>> onwards.
>>
>> As we keep the initial RAM at 1GB base address, we do not need to do
>> invasive changes in the EDK2 FW. It seems nobody is eager to do
>> that job at the moment.
>>
>> Device memory being put just after the initial RAM, it is possible
>> to get access to this feature while keeping a 1TB address map.
>>
>> This series reuses/rebases patches initially submitted by Shameer
>> in [1] and Kwangwoo in [2] for the PC-DIMM and NV-DIMM parts.
>>
>> Functionally, the series is split into 3 parts:
>> 1) bump of the initial RAM limit [1 - 9] and change in
>>    the memory map
> 
>> 2) Support of PC-DIMM [10 - 13]
> Is this part complete ACPI wise (for coldplug)? I haven't noticed
> DSDT AML here no E820 changes, so ACPI wise pc-dimm shouldn't be
> visible to the guest. It might be that DT is masking problem
> but well, that won't work on ACPI only guests.

guest /proc/meminfo or "lshw -class memory" reflects the amount of mem
added with the DIMM slots. So it looks fine to me. Isn't E820 a pure x86
matter? What else would you expect in the dsdt? I understand hotplug
would require extra modifications but I don't see anything else missing
for coldplug.
> Even though I've tried make mem hotplug ACPI parts not x86 specific,
> I'm afraid it might be tightly coupled with hotplug support.
> So here are 2 options make DSDT part work without hotplug or
> implement hotplug here. I think the former is just a waste of time
> and we should just add hotplug. It should take relatively minor effort
> since you already implemented most of boiler plate here.

Shameer sent an RFC series for supporting hotplug.

[RFC PATCH 0/4] ARM virt: ACPI memory hotplug support
https://patchwork.kernel.org/cover/10783589/

I tested PCDIMM hotplug (with ACPI) this afternoon and it seemed to be
OK, even after system_reset.

Note the hotplug kernel support on ARM is very recent. I would prefer to
dissociate both efforts if we want to get a chance making coldplug for
4.0. Also we have an issue for NVDIMM since on reboot the guest does not
boot properly.

> 
> As for how to implement ACPI HW part, I suggest to borrow GED
> device that NEMU guys trying to use instead of GPIO route,
> like we do now for ACPI_POWER_BUTTON_DEVICE to deliver event.
> So that it would be easier to share this with their virt-x86
> machine eventually.
Sounds like a different approach than the one initiated by Shameer?

Thanks

Eric
> 
> 
>> 3) Support of NV-DIMM [14 - 17]
> The same might be true for NUMA but I haven't dug this deep in to
> that part.
> 
>>
>> 1) can be upstreamed before 2 and 2 can be upstreamed before 3.
>>
>> Work is ongoing to transform the whole memory as device memory.
>> However this move is not trivial and to me, is independent on
>> the improvements brought by this series:
>> - if we were to use DIMM for initial RAM, those DIMMs would use
>>   use slots. Although they would not be part of the ones provided
>>   using the ",slots" options, they are ACPI limited resources.
>> - DT and ACPI description needs to be reworked
>> - NUMA integration needs special care
>> - a special device memory object may be required to avoid consuming
>>   slots and easing the FW description.
>>
>> So I preferred to separate the concerns. This new implementation
>> based on device memory could be candidate for another virt
>> version.
>>
>> Best Regards
>>
>> Eric
>>
>> References:
>>
>> [0] [RFC v2 0/6] hw/arm: Add support for non-contiguous iova regions
>> http://patchwork.ozlabs.org/cover/914694/
>>
>> [1] [RFC PATCH 0/3] add nvdimm support on AArch64 virt platform
>> https://lists.gnu.org/archive/html/qemu-devel/2016-07/msg04599.html
>>
>> This series can be found at:
>> https://github.com/eauger/qemu/tree/v3.1.0-dimm-v7
>>
>> History:
>>
>> v6 -> v7:
>> - Addressed Peter and Igor comments (exceptions sent my email)
>> - Fixed TCG case. Now device memory works also for TCG and vcpu
>>   pamax is checked
>> - See individual logs for more details
>>
>> v5 -> v6:
>> - mingw compilation issue fix
>> - kvm_arm_get_max_vm_phys_shift always returns the number of supported
>>   IPA bits
>> - new patch "hw/arm/virt: Rename highmem IO regions" that eases the review
>>   of "hw/arm/virt: Split the memory map description"
>> - "hw/arm/virt: Move memory map initialization into machvirt_init"
>>   squashed into the previous patch
>> - change alignment of IO regions beyond the RAM so that it matches their
>>   size
>>
>> v4 -> v5:
>> - change in the memory map
>> - see individual logs
>>
>> v3 -> v4:
>> - rebase on David's "pc-dimm: next bunch of cleanups" and
>>   "pc-dimm: pre_plug "slot" and "addr" assignment"
>> - kvm-type option not used anymore. We directly use
>>   maxram_size and ram_size machine fields to compute the
>>   MAX IPA range. Migration is naturally handled as CLI
>>   option are kept between source and destination. This was
>>   suggested by David.
>> - device_memory_start and device_memory_size not stored
>>   anymore in vms->bootinfo
>> - I did not take into account 2 Igor's comments: the one
>>   related to the refactoring of arm_load_dtb and the one
>>   related to the generation of the dtb after system_reset
>>   which would contain nodes of hotplugged devices (we do
>>   not support hotplug at this stage)
>> - check the end-user does not attempt to hotplug a device
>> - addition of "vl: Set machine ram_size, maxram_size and
>>   ram_slots earlier"
>>
>> v2 -> v3:
>> - fix pc_q35 and pc_piix compilation error
>> - kwangwoo's email being not valid anymore, remove his address
>>
>> v1 -> v2:
>> - kvm_get_max_vm_phys_shift moved in arch specific file
>> - addition of NVDIMM part
>> - single series
>> - rebase on David's refactoring
>>
>> v1:
>> - was "[RFC 0/6] KVM/ARM: Dynamic and larger GPA size"
>> - was "[RFC 0/5] ARM virt: Support PC-DIMM at 2TB"
>>
>> Best Regards
>>
>> Eric
>>
>>
>> Eric Auger (12):
>>   hw/arm/virt: Rename highmem IO regions
>>   hw/arm/virt: Split the memory map description
>>   hw/boards: Add a MachineState parameter to kvm_type callback
>>   kvm: add kvm_arm_get_max_vm_ipa_size
>>   vl: Set machine ram_size, maxram_size and ram_slots earlier
>>   hw/arm/virt: Dynamic memory map depending on RAM requirements
>>   hw/arm/virt: Implement kvm_type function for 4.0 machine
>>   hw/arm/virt: Bump the 255GB initial RAM limit
>>   hw/arm/virt: Add memory hotplug framework
>>   hw/arm/virt: Allocate device_memory
>>   hw/arm/boot: Expose the pmem nodes in the DT
>>   hw/arm/virt: Add nvdimm and nvdimm-persistence options
>>
>> Kwangwoo Lee (2):
>>   nvdimm: use configurable ACPI IO base and size
>>   hw/arm/virt: Add nvdimm hot-plug infrastructure
>>
>> Shameer Kolothum (3):
>>   hw/arm/boot: introduce fdt_add_memory_node helper
>>   hw/arm/boot: Expose the PC-DIMM nodes in the DT
>>   hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
>>
>>  accel/kvm/kvm-all.c             |   2 +-
>>  default-configs/arm-softmmu.mak |   4 +
>>  hw/acpi/nvdimm.c                |  31 ++-
>>  hw/arm/boot.c                   | 136 ++++++++++--
>>  hw/arm/virt-acpi-build.c        |  23 +-
>>  hw/arm/virt.c                   | 364 ++++++++++++++++++++++++++++----
>>  hw/i386/pc_piix.c               |   6 +-
>>  hw/i386/pc_q35.c                |   6 +-
>>  hw/ppc/mac_newworld.c           |   3 +-
>>  hw/ppc/mac_oldworld.c           |   2 +-
>>  hw/ppc/spapr.c                  |   2 +-
>>  include/hw/arm/virt.h           |  24 ++-
>>  include/hw/boards.h             |   5 +-
>>  include/hw/mem/nvdimm.h         |   4 +
>>  target/arm/kvm.c                |  10 +
>>  target/arm/kvm_arm.h            |  13 ++
>>  vl.c                            |   6 +-
>>  17 files changed, 556 insertions(+), 85 deletions(-)
>>
> 
>