[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-block] [PATCH v2 07/11] ppc405_boards: Don't size flash memory
From: |
Alex Bennée |
Subject: |
Re: [Qemu-block] [PATCH v2 07/11] ppc405_boards: Don't size flash memory to match backing image |
Date: |
Wed, 27 Feb 2019 10:35:34 +0000 |
User-agent: |
mu4e 1.1.0; emacs 26.1 |
Markus Armbruster <address@hidden> writes:
> Machine "ref405ep" maps its flash memory at address 2^32 - image size.
> Image size is rounded up to the next multiple of 64KiB. Useless,
> because pflash_cfi02_realize() fails with "failed to read the initial
> flash content" unless the rounding is a no-op.
>
> If the image size exceeds 0x80000 Bytes, we overlap first SRAM, then
> other stuff. No idea how that would play out, but a useful outcomes
> seem unlikely.
>
> Map the flash memory at fixed address 0xFFF80000 with size 512KiB,
> regardless of image size, to match the physical hardware.
>
> Machine "taihu" maps its boot flash memory similarly. The code even
> has a comment /* XXX: should check that size is 2MB */, followed by
> disabled code to adjust the size to 2MiB regardless of image size.
>
> Its code to map its application flash memory looks the same, except
> there the XXX comment asks for 32MiB, and the code to adjust the size
> isn't disabled. Note that pflash_cfi02_realize() fails with "failed
> to read the initial flash content" for images smaller than 32MiB.
>
> Map the boot flash memory at fixed address 0xFFE00000 with size 2MiB,
> to match the physical hardware. Delete dead code from application
> flash mapping, and simplify some.
It seems to me the DEBUG_BOARD_INIT code is probably out of date cruft
that could be excised all together. But that doesn't stop this being
useful:
Reviewed-by: Alex Bennée <address@hidden>
>
> Cc: David Gibson <address@hidden>
> Signed-off-by: Markus Armbruster <address@hidden>
> Acked-by: David Gibson <address@hidden>
> ---
> hw/ppc/ppc405_boards.c | 51 +++++++++++++-----------------------------
> 1 file changed, 15 insertions(+), 36 deletions(-)
>
> diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
> index f47b15f10e..672717ef1b 100644
> --- a/hw/ppc/ppc405_boards.c
> +++ b/hw/ppc/ppc405_boards.c
> @@ -158,7 +158,7 @@ static void ref405ep_init(MachineState *machine)
> target_ulong kernel_base, initrd_base;
> long kernel_size, initrd_size;
> int linux_boot;
> - int fl_idx, fl_sectors, len;
> + int len;
> DriveInfo *dinfo;
> MemoryRegion *sysmem = get_system_memory();
>
> @@ -185,26 +185,19 @@ static void ref405ep_init(MachineState *machine)
> #ifdef DEBUG_BOARD_INIT
> printf("%s: register BIOS\n", __func__);
> #endif
> - fl_idx = 0;
> #ifdef USE_FLASH_BIOS
> - dinfo = drive_get(IF_PFLASH, 0, fl_idx);
> + dinfo = drive_get(IF_PFLASH, 0, 0);
> if (dinfo) {
> - BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> - bios_size = blk_getlength(blk);
> - fl_sectors = (bios_size + 65535) >> 16;
> #ifdef DEBUG_BOARD_INIT
> - printf("Register parallel flash %d size %lx"
> - " at addr %lx '%s' %d\n",
> - fl_idx, bios_size, -bios_size,
> - blk_name(blk), fl_sectors);
> + printf("Register parallel flash\n");
> #endif
> + bios_size = 8 * MiB;
> pflash_cfi02_register((uint32_t)(-bios_size),
> NULL, "ef405ep.bios", bios_size,
> - blk, 65536, fl_sectors, 1,
> + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> + 64 * KiB, bios_size / (64 * KiB), 1,
> 2, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555,
> 0x2AA,
> 1);
> - fl_idx++;
> } else
> #endif
> {
> @@ -455,7 +448,7 @@ static void taihu_405ep_init(MachineState *machine)
> target_ulong kernel_base, initrd_base;
> long kernel_size, initrd_size;
> int linux_boot;
> - int fl_idx, fl_sectors;
> + int fl_idx;
> DriveInfo *dinfo;
>
> /* RAM is soldered to the board so the size cannot be changed */
> @@ -486,21 +479,14 @@ static void taihu_405ep_init(MachineState *machine)
> #if defined(USE_FLASH_BIOS)
> dinfo = drive_get(IF_PFLASH, 0, fl_idx);
> if (dinfo) {
> - BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> - bios_size = blk_getlength(blk);
> - /* XXX: should check that size is 2MB */
> - // bios_size = 2 * 1024 * 1024;
> - fl_sectors = (bios_size + 65535) >> 16;
> #ifdef DEBUG_BOARD_INIT
> - printf("Register parallel flash %d size %lx"
> - " at addr %lx '%s' %d\n",
> - fl_idx, bios_size, -bios_size,
> - blk_name(blk), fl_sectors);
> + printf("Register boot flash\n");
> #endif
> - pflash_cfi02_register((uint32_t)(-bios_size),
> + bios_size = 2 * MiB;
> + pflash_cfi02_register(0xFFE00000,
> NULL, "taihu_405ep.bios", bios_size,
> - blk, 65536, fl_sectors, 1,
> + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> + 64 * KiB, bios_size / (64 * KiB), 1,
> 4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555,
> 0x2AA,
> 1);
> fl_idx++;
> @@ -536,20 +522,13 @@ static void taihu_405ep_init(MachineState *machine)
> /* Register Linux flash */
> dinfo = drive_get(IF_PFLASH, 0, fl_idx);
> if (dinfo) {
> - BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
> -
> - bios_size = blk_getlength(blk);
> - /* XXX: should check that size is 32MB */
> bios_size = 32 * MiB;
> - fl_sectors = (bios_size + 65535) >> 16;
> #ifdef DEBUG_BOARD_INIT
> - printf("Register parallel flash %d size %lx"
> - " at addr " TARGET_FMT_lx " '%s'\n",
> - fl_idx, bios_size, (target_ulong)0xfc000000,
> - blk_name(blk));
> + printf("Register application flash\n"
> #endif
> pflash_cfi02_register(0xfc000000, NULL, "taihu_405ep.flash",
> bios_size,
> - blk, 65536, fl_sectors, 1,
> + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
> + 64 * KiB, bios_size / (64 * KiB), 1,
> 4, 0x0001, 0x22DA, 0x0000, 0x0000, 0x555,
> 0x2AA,
> 1);
> fl_idx++;
--
Alex Bennée
- Re: [Qemu-block] [PATCH v2 02/11] pflash_cfi01: Do not exit() on guest aborting "write to buffer", (continued)
- [Qemu-block] [PATCH v2 05/11] hw: Use PFLASH_CFI0{1, 2} and TYPE_PFLASH_CFI0{1, 2}, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 09/11] mips_malta: Clean up definition of flash memory size somewhat, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 06/11] sam460ex: Don't size flash memory to match backing image, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 04/11] pflash: Rename *CFI_PFLASH* to *PFLASH_CFI*, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 07/11] ppc405_boards: Don't size flash memory to match backing image, Markus Armbruster, 2019/02/26
- Re: [Qemu-block] [PATCH v2 07/11] ppc405_boards: Don't size flash memory to match backing image,
Alex Bennée <=
- [Qemu-block] [PATCH v2 10/11] pflash: Clean up after commit 368a354f02b part 1, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 11/11] pflash: Clean up after commit 368a354f02b part 2, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 08/11] r2d: Flash memory creation is confused about size, mark FIXME, Markus Armbruster, 2019/02/26
- [Qemu-block] [PATCH v2 01/11] pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02, Markus Armbruster, 2019/02/26
- Re: [Qemu-block] [PATCH v2 00/11] pflash: Fixes and cleanups, Alex Bennée, 2019/02/26