|
| From: | Alexander Ivanov |
| Subject: | Re: [PATCH 15/19] parallels: Remove unnecessary data_end field |
| Date: | Sat, 7 Oct 2023 16:30:47 +0200 |
| User-agent: | Mozilla Thunderbird |
On 10/7/23 13:21, Mike Maslenkin wrote:
Yes, I understand this part. OK, I think, I could place 16 patch before 15 andOn Sat, Oct 7, 2023 at 1:18 PM Alexander Ivanov <alexander.ivanov@virtuozzo.com> wrote:On 10/6/23 21:43, Mike Maslenkin wrote:On Mon, Oct 2, 2023 at 12:01 PM Alexander Ivanov <alexander.ivanov@virtuozzo.com> wrote:Since we have used bitmap, field data_end in BDRVParallelsState is redundant and can be removed. Add parallels_data_end() helper and remove data_end handling. Signed-off-by: Alexander Ivanov<alexander.ivanov@virtuozzo.com> --- block/parallels.c | 33 +++++++++++++-------------------- block/parallels.h | 1 - 2 files changed, 13 insertions(+), 21 deletions(-) diff --git a/block/parallels.c b/block/parallels.c index 48ea5b3f03..80a7171b84 100644 --- a/block/parallels.c +++ b/block/parallels.c @@ -265,6 +265,13 @@ static void parallels_free_used_bitmap(BlockDriverState *bs) g_free(s->used_bmap); } +static int64_t parallels_data_end(BDRVParallelsState *s) +{ + int64_t data_end = s->data_start * BDRV_SECTOR_SIZE; + data_end += s->used_bmap_size * s->cluster_size; + return data_end; +} + int64_t parallels_allocate_host_clusters(BlockDriverState *bs, int64_t *clusters) { @@ -275,7 +282,7 @@ int64_t parallels_allocate_host_clusters(BlockDriverState *bs, first_free = find_first_zero_bit(s->used_bmap, s->used_bmap_size); if (first_free == s->used_bmap_size) { - host_off = s->data_end * BDRV_SECTOR_SIZE; + host_off = parallels_data_end(s); prealloc_clusters = *clusters + s->prealloc_size / s->tracks; bytes = prealloc_clusters * s->cluster_size; @@ -297,9 +304,6 @@ int64_t parallels_allocate_host_clusters(BlockDriverState *bs, s->used_bmap = bitmap_zero_extend(s->used_bmap, s->used_bmap_size, new_usedsize); s->used_bmap_size = new_usedsize; - if (host_off + bytes > s->data_end * BDRV_SECTOR_SIZE) { - s->data_end = (host_off + bytes) / BDRV_SECTOR_SIZE; - } } else { next_used = find_next_bit(s->used_bmap, s->used_bmap_size, first_free); @@ -315,8 +319,7 @@ int64_t parallels_allocate_host_clusters(BlockDriverState *bs, * branch. In the other case we are likely re-using hole. Preallocate * the space if required by the prealloc_mode. */ - if (s->prealloc_mode == PRL_PREALLOC_MODE_FALLOCATE && - host_off < s->data_end * BDRV_SECTOR_SIZE) { + if (s->prealloc_mode == PRL_PREALLOC_MODE_FALLOCATE) { ret = bdrv_pwrite_zeroes(bs->file, host_off, bytes, 0); if (ret < 0) { return ret; @@ -757,13 +760,7 @@ parallels_check_outside_image(BlockDriverState *bs, BdrvCheckResult *res, } } - if (high_off == 0) { - res->image_end_offset = s->data_end << BDRV_SECTOR_BITS; - } else { - res->image_end_offset = high_off + s->cluster_size; - s->data_end = res->image_end_offset >> BDRV_SECTOR_BITS; - } - + res->image_end_offset = parallels_data_end(s); return 0; } @@ -806,7 +803,6 @@ parallels_check_leak(BlockDriverState *bs, BdrvCheckResult *res, res->check_errors++; return ret; } - s->data_end = res->image_end_offset >> BDRV_SECTOR_BITS; parallels_free_used_bitmap(bs); ret = parallels_fill_used_bitmap(bs); @@ -1361,8 +1357,7 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags, } s->data_start = data_start; - s->data_end = s->data_start; - if (s->data_end < (s->header_size >> BDRV_SECTOR_BITS)) { + if (s->data_start < (s->header_size >> BDRV_SECTOR_BITS)) { /* * There is not enough unused space to fit to block align between BAT * and actual data. We can't avoid read-modify-write... @@ -1403,11 +1398,10 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags, for (i = 0; i < s->bat_size; i++) { sector = bat2sect(s, i); - if (sector + s->tracks > s->data_end) { - s->data_end = sector + s->tracks; + if (sector + s->tracks > file_nb_sectors) { + need_check = true; } } - need_check = need_check || s->data_end > file_nb_sectors; ret = parallels_fill_used_bitmap(bs); if (ret == -ENOMEM) { @@ -1461,7 +1455,6 @@ static int parallels_truncate_unused_clusters(BlockDriverState *bs) end_off = (end_off + 1) * s->cluster_size; } end_off += s->data_start * BDRV_SECTOR_SIZE; - s->data_end = end_off / BDRV_SECTOR_SIZE; return bdrv_truncate(bs->file, end_off, true, PREALLOC_MODE_OFF, 0, NULL); } diff --git a/block/parallels.h b/block/parallels.h index 18b4f8068e..a6a048d890 100644 --- a/block/parallels.h +++ b/block/parallels.h @@ -79,7 +79,6 @@ typedef struct BDRVParallelsState { unsigned int bat_size; int64_t data_start; - int64_t data_end; uint64_t prealloc_size; ParallelsPreallocMode prealloc_mode; -- 2.34.1Is it intended behavior? Run: 1. ./qemu-img create -f parallels $TEST_IMG 1T 2. dd if=/dev/zero of=$TEST_IMG oseek=12 bs=1M count=128 conv=notrunc 3. ./qemu-img check $TEST_IMG No errors were found on the image. Image end offset: 150994944 Without this patch `qemu-img check` reports: ERROR space leaked at the end of the image 145752064 139 leaked clusters were found on the image. This means waste of disk space, but no harm to data. Image end offset: 5242880The original intention is do nothing at this point if an image is opened as RO. In the next patch parallels_check_leak() was rewritten to detect unused clusters at the image end. But there is a bug: (end_off == s->used_bmap_size) case is handled in an incorrect way. Will fix it, thank you.Note: there is another issue caused by previous commits exists. g_free asserts from parallels_free_used_bitmap() because of s->used_bmap is NULL.Maybe I don't understand your point, but if you meant that g_free() could be called with NULL argument, it's not a problem. GLib Manual says: void g_free (/|gpointer <https://www.manpagez.com/html/glib/glib-2.56.0/glib-Basic-Types.php#gpointer> mem|/); If /|mem|/ is|NULL| <https://www.manpagez.com/html/glib/glib-2.56.0/glib-Standard-Macros.php#NULL:CAPS> it simply returns, so there is no need to check /|mem|/ against |NULL| <https://www.manpagez.com/html/glib/glib-2.56.0/glib-Standard-Macros.php#NULL:CAPS> before calling this function.To reproduce this crash at revision before or without patch 15/19, run commands: 1. ./qemu-img create -f parallels $TEST_IMG 1T 2. dd if=/dev/zero of=$TEST_IMG oseek=12 bs=1M count=128 conv=notrunc 3. ./qemu-img check -r leaks $TEST_IMGSorry, but I couldn't reproduce it. Reset to 14/19, made the three steps and had such output: $ ./qemu-img create -f parallels $TEST_IMG 1T Formatting 'test.img', fmt=parallels size=1099511627776 cluster_size=1048576 $ dd if=/dev/zero of=$TEST_IMG seek=12 bs=1M count=128 conv=notrunc 128+0 records in 128+0 records out 134217728 bytes (134 MB, 128 MiB) copied, 0.0797576 s, 1.7 GB/s $ ./qemu-img check -r leaks $TEST_IMG Repairing space leaked at the end of the image 141557760 The following inconsistencies were found and repaired: 135 leaked clusters 0 corruptions Double checking the fixed image now... No errors were found on the image. Image end offset: 5242880My comment regarding patch 15 is about 'check' operation is not able to detect leaked data anymore. So, after this patch I see: $ ./qemu-img info leak.bin image: leak.bin file format: parallels virtual size: 1 TiB (1099511627776 bytes) disk size: 145 MiB Child node '/file': filename: leak.bin protocol type: file file length: 146 MiB (153092096 bytes) disk size: 145 MiB $ ./qemu-img check -r leaks leak.bin No errors were found on the image. Image end offset: 153092096 After reverting this patch 'check' reports about: ERROR space leaked at the end of the image 148897792 So, after reverting patch 15 I tried to repair such image and got abort trap.
leaks would handle in the correct way at any point of the patch sequence.
I rechecked with downloaded patches, rebuild from scratch and can tell that there is no abort on master branch, but it appears after applying patches[1-9].
Maybe I do something wrong, but I reset to the top of mainstream, applied 1-9 patches, rebuilt QEMU and didn't see any abort.
Obviously It can be debugged and the reason is that
parallels_fill_used_bitmap() returns after
s->used_bmap_size = DIV_ROUND_UP(payload_bytes, s->cluster_size);
if (s->used_bmap_size == 0) {
return 0;
}
Because DIV_ROUND_UP(payload_bytes, s->cluster_size); gives a 0;
So subsequent parallels_free_used_bitmap() called from
parallels_close() causes an assert.
So, the first invocation of parallels_free_used_bitmap is:
* frame #0: 0x0000000100091830 qemu-img`parallels_check_leak
[inlined] parallels_free_used_bitmap(bs=0x0000000101011600) at
parallels.c:263:33 [opt]
frame #1: 0x0000000100091830
qemu-img`parallels_check_leak(bs=0x0000000101011600,
res=0x000000016fdff5d8, fix=BDRV_FIX_LEAKS, explicit=true) at
parallels.c:811:9 [opt]
frame #2: 0x0000000100090d80
qemu-img`parallels_co_check(bs=0x0000000101011600,
res=0x000000016fdff5d8, fix=BDRV_FIX_LEAKS) at parallels.c:1014:15
[opt]
frame #3: 0x0000000100014f6c
qemu-img`bdrv_co_check_entry(opaque=0x000000016fdff560) at
block-gen.c:556:14 [opt]
And the second generates abort from there:
* frame #0: 0x000000010008fef8 qemu-img`parallels_close [inlined]
parallels_free_used_bitmap(bs=<unavailable>) at parallels.c:263:33
In this line we have: BDRVParallelsState *s = bs->opaque;So there is only one possibility to abort - incorrect bs. I don't know how it
could be possible.
[opt]
frame #1: 0x000000010008fef8
qemu-img`parallels_close(bs=0x0000000101011600) at parallels.c:1501:5
[opt]
frame #2: 0x0000000100019d3c qemu-img`bdrv_unref [inlined]
bdrv_close(bs=0x0000000101011600) at block.c:5164:13 [opt]
After the first parallels_free_used_bitmap(), there is an actual image
truncation happens, so there is no payload at the moment of the next
parallels_fill_used_bitmap(),
PS: there are a chances that some patches were not applied clearly,
I'll recheck this later.
I just reset to the mainstream top and apply 1-9 patches: $ git reset --hard 2f3913f4b2ad74baeb5a6f1d36efbd9ecdf1057d HEAD is now at 2f3913f4b2 Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging $ git am *.eml Applying: parallels: Move inactivation code to a separate function Applying: parallels: Add mark_unused() helper Applying: parallels: Move host clusters allocation to a separate function Applying: parallels: Set data_end value in parallels_check_leak() Applying: parallels: Recreate used bitmap in parallels_check_leak() Applying: parallels: Add a note about used bitmap in parallels_check_duplicate() Applying: parallels: Create used bitmap even if checks needed Applying: parallels: Make mark_used() and mark_unused() global functions Applying: parallels: Add dirty bitmaps saving
You can fetch it here (branch "parallels") - https://github.com/AlexanderIvanov-Virtuozzo/qemu.gitIt would be nice if it was possible to fetch changes from some repo, rather than extracting it from gmail.
Regards, Mike.
-- Best regards, Alexander Ivanov
| [Prev in Thread] | Current Thread | [Next in Thread] |