qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC PATCH v4 29/44] hw/pci/Makefile.objs: make pcie co


From: Yang Zhong
Subject: Re: [Qemu-devel] [RFC PATCH v4 29/44] hw/pci/Makefile.objs: make pcie configurable
Date: Fri, 25 Jan 2019 10:48:43 +0800
User-agent: Mutt/1.5.21 (2010-09-15)

On Thu, Jan 24, 2019 at 09:43:44PM -0500, Michael S. Tsirkin wrote:
> On Fri, Jan 25, 2019 at 10:10:53AM +0800, Yang Zhong wrote:
> > On Wed, Jan 23, 2019 at 09:23:49AM -0500, Michael S. Tsirkin wrote:
> > > On Wed, Jan 23, 2019 at 02:56:03PM +0800, Yang Zhong wrote:
> > > > Make pcie splited from pci and make it configurable.
> > > > 
> > > > Signed-off-by: Yang Zhong <address@hidden>
> > > > Cc: Michael S. Tsirkin <address@hidden>
> > > > Reviewed-by: Thomas Huth <address@hidden>
> > > > ---
> > > >  default-configs/pci.mak | 1 +
> > > >  hw/pci/Kconfig          | 3 +++
> > > >  hw/pci/Makefile.objs    | 5 +++--
> > > >  3 files changed, 7 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/default-configs/pci.mak b/default-configs/pci.mak
> > > > index f7b3690bbd..b17b456b1e 100644
> > > > --- a/default-configs/pci.mak
> > > > +++ b/default-configs/pci.mak
> > > > @@ -1,4 +1,5 @@
> > > >  CONFIG_PCI=y
> > > > +CONFIG_PCI_EXPRESS=y
> > > >  # For now, CONFIG_IDE_CORE requires ISA, so we enable it here
> > > >  CONFIG_ISA_BUS=y
> > > >  CONFIG_VIRTIO_PCI=y
> > > > diff --git a/hw/pci/Kconfig b/hw/pci/Kconfig
> > > > index d3d2205577..81533b9dc0 100644
> > > > --- a/hw/pci/Kconfig
> > > > +++ b/hw/pci/Kconfig
> > > > @@ -1,2 +1,5 @@
> > > >  config PCI
> > > >      bool
> > > > +
> > > > +config PCI_EXPRESS
> > > > +    bool
> > > 
> > > Hmm this allows PCIE without PCI.
> > > Should PCI_EXPRESS select PCI?
> > > 
> > > It's selected itself so can't depend on PCI.
> > >
> >   Hello Michael,
> > 
> >   I did this in patch 30 as below:
> >   
> >   diff --git a/hw/pci/Kconfig b/hw/pci/Kconfig
> >   index 81533b9dc0..4ca2537980 100644
> >   --- a/hw/pci/Kconfig
> >   +++ b/hw/pci/Kconfig
> >   @@ -3,3 +3,4 @@ config PCI
> > 
> >   config PCI_EXPRESS
> >      bool
> > +    select PCI
> > 
> >    Regards,
> > 
> >    Yang
> 
> Maybe squash this into patch 29 then.
> 
> > >
  Okay, i will do it in next version, thanks Michael, Yang.
 
> > > > diff --git a/hw/pci/Makefile.objs b/hw/pci/Makefile.objs
> > > > index 9f905e6344..d30eb32cbb 100644
> > > > --- a/hw/pci/Makefile.objs
> > > > +++ b/hw/pci/Makefile.objs
> > > > @@ -2,8 +2,9 @@ common-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
> > > >  common-obj-$(CONFIG_PCI) += msix.o msi.o
> > > >  common-obj-$(CONFIG_PCI) += shpc.o
> > > >  common-obj-$(CONFIG_PCI) += slotid_cap.o
> > > > -common-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
> > > > -common-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
> > > > +common-obj-$(CONFIG_PCI) += pci_host.o
> > > > +common-obj-$(CONFIG_PCI_EXPRESS) += pcie.o pcie_aer.o
> > > > +common-obj-$(CONFIG_PCI_EXPRESS) += pcie_port.o pcie_host.o
> > > >  
> > > >  common-obj-$(call lnot,$(CONFIG_PCI)) += pci-stub.o
> > > >  common-obj-$(CONFIG_ALL) += pci-stub.o
> > > > -- 
> > > > 2.17.1



reply via email to

[Prev in Thread] Current Thread [Next in Thread]