qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] hw/ppc: Move ppc40x_*reset() functions from ppc


From: David Gibson
Subject: Re: [Qemu-devel] [PATCH] hw/ppc: Move ppc40x_*reset() functions from ppc405_uc.c to ppc.c
Date: Thu, 31 Jan 2019 09:35:57 +1100
User-agent: Mutt/1.10.1 (2018-07-13)

On Wed, Jan 30, 2019 at 03:30:49PM +0100, Thomas Huth wrote:
> Currently, it is not possible to build a QEMU binary without the
> ppc405_uc.c file, even if you do not want to have the embedded machines
> in the binary. This is bad since it's quite a bit of code and this code
> pulls in some more dependencies (e.g. via the usage of serial_mm_init())
> which would not be needed otherwise - especially with the upcoming
> Kconfig-style configuration system for QEMU.
> 
> The only functions from this file which are really always required for
> linking are the ppc40x_*reset() functions, so move these functions to
> ppc.c, close to the ppc40x_set_irq() function that calls them. Now we
> can flag ppc405_uc.c and ppc4xx_devs.c with the CONFIG_PPC4XX config
> switch, too.
> 
> And while we're at it, replace the printf()s in these ppc40x_*reset()
> functions with proper calls to qemu_log_mask().
> 
> Signed-off-by: Thomas Huth <address@hidden>

Applied, thanks.

> ---
>  hw/ppc/Makefile.objs |  3 +--
>  hw/ppc/ppc.c         | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/ppc/ppc405_uc.c   | 58 
> ----------------------------------------------------
>  3 files changed, 57 insertions(+), 60 deletions(-)
> 
> diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
> index 4e0c1c0..1e753de 100644
> --- a/hw/ppc/Makefile.objs
> +++ b/hw/ppc/Makefile.objs
> @@ -13,8 +13,7 @@ obj-y += spapr_pci_vfio.o
>  endif
>  obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
>  # PowerPC 4xx boards
> -obj-y += ppc4xx_devs.o ppc405_uc.o
> -obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o
> +obj-$(CONFIG_PPC4XX) += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o 
> ppc405_boards.o
>  obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o
>  obj-$(CONFIG_SAM460EX) += sam460ex.o
>  # PReP
> diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c
> index ec4be25..98b409f 100644
> --- a/hw/ppc/ppc.c
> +++ b/hw/ppc/ppc.c
> @@ -310,6 +310,62 @@ void ppcPOWER7_irq_init(PowerPCCPU *cpu)
>  }
>  #endif /* defined(TARGET_PPC64) */
>  
> +void ppc40x_core_reset(PowerPCCPU *cpu)
> +{
> +    CPUPPCState *env = &cpu->env;
> +    target_ulong dbsr;
> +
> +    qemu_log_mask(CPU_LOG_RESET, "Reset PowerPC core\n");
> +    cpu_interrupt(CPU(cpu), CPU_INTERRUPT_RESET);
> +    dbsr = env->spr[SPR_40x_DBSR];
> +    dbsr &= ~0x00000300;
> +    dbsr |= 0x00000100;
> +    env->spr[SPR_40x_DBSR] = dbsr;
> +}
> +
> +void ppc40x_chip_reset(PowerPCCPU *cpu)
> +{
> +    CPUPPCState *env = &cpu->env;
> +    target_ulong dbsr;
> +
> +    qemu_log_mask(CPU_LOG_RESET, "Reset PowerPC chip\n");
> +    cpu_interrupt(CPU(cpu), CPU_INTERRUPT_RESET);
> +    /* XXX: TODO reset all internal peripherals */
> +    dbsr = env->spr[SPR_40x_DBSR];
> +    dbsr &= ~0x00000300;
> +    dbsr |= 0x00000200;
> +    env->spr[SPR_40x_DBSR] = dbsr;
> +}
> +
> +void ppc40x_system_reset(PowerPCCPU *cpu)
> +{
> +    qemu_log_mask(CPU_LOG_RESET, "Reset PowerPC system\n");
> +    qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
> +}
> +
> +void store_40x_dbcr0(CPUPPCState *env, uint32_t val)
> +{
> +    PowerPCCPU *cpu = ppc_env_get_cpu(env);
> +
> +    switch ((val >> 28) & 0x3) {
> +    case 0x0:
> +        /* No action */
> +        break;
> +    case 0x1:
> +        /* Core reset */
> +        ppc40x_core_reset(cpu);
> +        break;
> +    case 0x2:
> +        /* Chip reset */
> +        ppc40x_chip_reset(cpu);
> +        break;
> +    case 0x3:
> +        /* System reset */
> +        ppc40x_system_reset(cpu);
> +        break;
> +    }
> +}
> +
>  /* PowerPC 40x internal IRQ controller */
>  static void ppc40x_set_irq(void *opaque, int pin, int level)
>  {
> diff --git a/hw/ppc/ppc405_uc.c b/hw/ppc/ppc405_uc.c
> index 8d3a797..3ae7f6d 100644
> --- a/hw/ppc/ppc405_uc.c
> +++ b/hw/ppc/ppc405_uc.c
> @@ -1156,64 +1156,6 @@ static void ppc4xx_gpt_init(hwaddr base, qemu_irq 
> irqs[5])
>  }
>  
>  
> /*****************************************************************************/
> -/* SPR */
> -void ppc40x_core_reset(PowerPCCPU *cpu)
> -{
> -    CPUPPCState *env = &cpu->env;
> -    target_ulong dbsr;
> -
> -    printf("Reset PowerPC core\n");
> -    cpu_interrupt(CPU(cpu), CPU_INTERRUPT_RESET);
> -    dbsr = env->spr[SPR_40x_DBSR];
> -    dbsr &= ~0x00000300;
> -    dbsr |= 0x00000100;
> -    env->spr[SPR_40x_DBSR] = dbsr;
> -}
> -
> -void ppc40x_chip_reset(PowerPCCPU *cpu)
> -{
> -    CPUPPCState *env = &cpu->env;
> -    target_ulong dbsr;
> -
> -    printf("Reset PowerPC chip\n");
> -    cpu_interrupt(CPU(cpu), CPU_INTERRUPT_RESET);
> -    /* XXX: TODO reset all internal peripherals */
> -    dbsr = env->spr[SPR_40x_DBSR];
> -    dbsr &= ~0x00000300;
> -    dbsr |= 0x00000200;
> -    env->spr[SPR_40x_DBSR] = dbsr;
> -}
> -
> -void ppc40x_system_reset(PowerPCCPU *cpu)
> -{
> -    printf("Reset PowerPC system\n");
> -    qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
> -}
> -
> -void store_40x_dbcr0 (CPUPPCState *env, uint32_t val)
> -{
> -    PowerPCCPU *cpu = ppc_env_get_cpu(env);
> -
> -    switch ((val >> 28) & 0x3) {
> -    case 0x0:
> -        /* No action */
> -        break;
> -    case 0x1:
> -        /* Core reset */
> -        ppc40x_core_reset(cpu);
> -        break;
> -    case 0x2:
> -        /* Chip reset */
> -        ppc40x_chip_reset(cpu);
> -        break;
> -    case 0x3:
> -        /* System reset */
> -        ppc40x_system_reset(cpu);
> -        break;
> -    }
> -}
> -
> -/*****************************************************************************/
>  /* PowerPC 405CR */
>  enum {
>      PPC405CR_CPC0_PLLMR  = 0x0B0,

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

Attachment: signature.asc
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]