[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 3/6] hw/virtio: derive vhost-user-gpio from vhost-user-bas
From: |
Michael S. Tsirkin |
Subject: |
Re: [PATCH v5 3/6] hw/virtio: derive vhost-user-gpio from vhost-user-base |
Date: |
Mon, 6 Nov 2023 12:15:11 -0500 |
On Thu, Oct 19, 2023 at 10:56:07AM +0100, Alex Bennée wrote:
> Now the new base class supports config handling we can take advantage
> and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
> this doesn't require any target specific hacks we only need to build
> the stubs once.
>
> Message-Id: <20230418162140.373219-12-alex.bennee@linaro.org>
> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20231009095937.195728-4-alex.bennee@linaro.org>
> ---
> include/hw/virtio/vhost-user-gpio.h | 23 +-
> hw/virtio/vhost-user-gpio.c | 407 ++--------------------------
> hw/virtio/meson.build | 5 +-
> 3 files changed, 22 insertions(+), 413 deletions(-)
>
> diff --git a/include/hw/virtio/vhost-user-gpio.h
> b/include/hw/virtio/vhost-user-gpio.h
> index a9d3f9b049..5201d5f072 100644
> --- a/include/hw/virtio/vhost-user-gpio.h
> +++ b/include/hw/virtio/vhost-user-gpio.h
> @@ -12,33 +12,14 @@
> #include "hw/virtio/virtio.h"
> #include "hw/virtio/vhost.h"
> #include "hw/virtio/vhost-user.h"
> -#include "standard-headers/linux/virtio_gpio.h"
> -#include "chardev/char-fe.h"
> +#include "hw/virtio/vhost-user-base.h"
>
> #define TYPE_VHOST_USER_GPIO "vhost-user-gpio-device"
> OBJECT_DECLARE_SIMPLE_TYPE(VHostUserGPIO, VHOST_USER_GPIO);
>
> struct VHostUserGPIO {
> /*< private >*/
> - VirtIODevice parent_obj;
> - CharBackend chardev;
> - struct virtio_gpio_config config;
> - struct vhost_virtqueue *vhost_vqs;
> - struct vhost_dev vhost_dev;
> - VhostUserState vhost_user;
> - VirtQueue *command_vq;
> - VirtQueue *interrupt_vq;
> - /**
> - * There are at least two steps of initialization of the
> - * vhost-user device. The first is a "connect" step and
> - * second is a "start" step. Make a separation between
> - * those initialization phases by using two fields.
> - *
> - * @connected: see vu_gpio_connect()/vu_gpio_disconnect()
> - * @started_vu: see vu_gpio_start()/vu_gpio_stop()
> - */
> - bool connected;
> - bool started_vu;
> + VHostUserBase parent;
> /*< public >*/
> };
>
> diff --git a/hw/virtio/vhost-user-gpio.c b/hw/virtio/vhost-user-gpio.c
> index 3d7fae3984..9f37c25415 100644
> --- a/hw/virtio/vhost-user-gpio.c
> +++ b/hw/virtio/vhost-user-gpio.c
> @@ -11,388 +11,25 @@
> #include "hw/qdev-properties.h"
> #include "hw/virtio/virtio-bus.h"
> #include "hw/virtio/vhost-user-gpio.h"
> -#include "qemu/error-report.h"
> #include "standard-headers/linux/virtio_ids.h"
> -#include "trace.h"
> +#include "standard-headers/linux/virtio_gpio.h"
>
> -#define REALIZE_CONNECTION_RETRIES 3
> -#define VHOST_NVQS 2
> -
> -/* Features required from VirtIO */
> -static const int feature_bits[] = {
> - VIRTIO_F_VERSION_1,
> - VIRTIO_F_NOTIFY_ON_EMPTY,
> - VIRTIO_RING_F_INDIRECT_DESC,
> - VIRTIO_RING_F_EVENT_IDX,
> - VIRTIO_GPIO_F_IRQ,
> - VIRTIO_F_RING_RESET,
> - VHOST_INVALID_FEATURE_BIT
> -};
> -
> -static void vu_gpio_get_config(VirtIODevice *vdev, uint8_t *config)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> - memcpy(config, &gpio->config, sizeof(gpio->config));
> -}
> -
> -static int vu_gpio_config_notifier(struct vhost_dev *dev)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(dev->vdev);
> -
> - memcpy(dev->vdev->config, &gpio->config, sizeof(gpio->config));
> - virtio_notify_config(dev->vdev);
> -
> - return 0;
> -}
> -
> -const VhostDevConfigOps gpio_ops = {
> - .vhost_dev_config_notifier = vu_gpio_config_notifier,
> +static Property vgpio_properties[] = {
> + DEFINE_PROP_CHR("chardev", VHostUserBase, chardev),
> + DEFINE_PROP_END_OF_LIST(),
> };
>
> -static int vu_gpio_start(VirtIODevice *vdev)
> -{
> - BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
> - VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> - struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> - int ret, i;
> -
> - if (!k->set_guest_notifiers) {
> - error_report("binding does not support guest notifiers");
> - return -ENOSYS;
> - }
> -
> - ret = vhost_dev_enable_notifiers(vhost_dev, vdev);
> - if (ret < 0) {
> - error_report("Error enabling host notifiers: %d", ret);
> - return ret;
> - }
> -
> - ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, true);
> - if (ret < 0) {
> - error_report("Error binding guest notifier: %d", ret);
> - goto err_host_notifiers;
> - }
> -
> - /*
> - * Before we start up we need to ensure we have the final feature
> - * set needed for the vhost configuration. The backend may also
> - * apply backend_features when the feature set is sent.
> - */
> - vhost_ack_features(&gpio->vhost_dev, feature_bits, vdev->guest_features);
> -
> - ret = vhost_dev_start(&gpio->vhost_dev, vdev, false);
> - if (ret < 0) {
> - error_report("Error starting vhost-user-gpio: %d", ret);
> - goto err_guest_notifiers;
> - }
> - gpio->started_vu = true;
> -
> - /*
> - * guest_notifier_mask/pending not used yet, so just unmask
> - * everything here. virtio-pci will do the right thing by
> - * enabling/disabling irqfd.
> - */
> - for (i = 0; i < gpio->vhost_dev.nvqs; i++) {
> - vhost_virtqueue_mask(&gpio->vhost_dev, vdev, i, false);
> - }
> -
> - /*
> - * As we must have VHOST_USER_F_PROTOCOL_FEATURES (because
> - * VHOST_USER_GET_CONFIG requires it) we need to explicitly enable
> - * the vrings.
> - */
> - g_assert(vhost_dev->vhost_ops &&
> - vhost_dev->vhost_ops->vhost_set_vring_enable);
> - ret = vhost_dev->vhost_ops->vhost_set_vring_enable(vhost_dev, true);
> - if (ret == 0) {
> - return 0;
> - }
> -
> - error_report("Failed to start vrings for vhost-user-gpio: %d", ret);
> -
> -err_guest_notifiers:
> - k->set_guest_notifiers(qbus->parent, gpio->vhost_dev.nvqs, false);
> -err_host_notifiers:
> - vhost_dev_disable_notifiers(&gpio->vhost_dev, vdev);
> -
> - return ret;
> -}
> -
> -static void vu_gpio_stop(VirtIODevice *vdev)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> - BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
> - VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
> - struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> - int ret;
> -
> - if (!gpio->started_vu) {
> - return;
> - }
> - gpio->started_vu = false;
> -
> - if (!k->set_guest_notifiers) {
> - return;
> - }
> -
> - vhost_dev_stop(vhost_dev, vdev, false);
> -
> - ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false);
> - if (ret < 0) {
> - error_report("vhost guest notifier cleanup failed: %d", ret);
> - return;
> - }
> -
> - vhost_dev_disable_notifiers(vhost_dev, vdev);
> -}
> -
> -static void vu_gpio_set_status(VirtIODevice *vdev, uint8_t status)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> - bool should_start = virtio_device_should_start(vdev, status);
> -
> - trace_virtio_gpio_set_status(status);
> -
> - if (!gpio->connected) {
> - return;
> - }
> -
> - if (vhost_dev_is_started(&gpio->vhost_dev) == should_start) {
> - return;
> - }
> -
> - if (should_start) {
> - if (vu_gpio_start(vdev)) {
> - qemu_chr_fe_disconnect(&gpio->chardev);
> - }
> - } else {
> - vu_gpio_stop(vdev);
> - }
> -}
> -
> -static uint64_t vu_gpio_get_features(VirtIODevice *vdev, uint64_t features,
> - Error **errp)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> - return vhost_get_features(&gpio->vhost_dev, feature_bits, features);
> -}
> -
> -static void vu_gpio_handle_output(VirtIODevice *vdev, VirtQueue *vq)
> -{
> - /*
> - * Not normally called; it's the daemon that handles the queue;
> - * however virtio's cleanup path can call this.
> - */
> -}
> -
> -static void vu_gpio_guest_notifier_mask(VirtIODevice *vdev, int idx, bool
> mask)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> - /*
> - * Add the check for configure interrupt, Use VIRTIO_CONFIG_IRQ_IDX -1
> - * as the macro of configure interrupt's IDX, If this driver does not
> - * support, the function will return
> - */
> -
> - if (idx == VIRTIO_CONFIG_IRQ_IDX) {
> - return;
> - }
> -
> - vhost_virtqueue_mask(&gpio->vhost_dev, vdev, idx, mask);
> -}
> -
> -static struct vhost_dev *vu_gpio_get_vhost(VirtIODevice *vdev)
> -{
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> - return &gpio->vhost_dev;
> -}
> -
> -static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserGPIO *gpio)
> -{
> - virtio_delete_queue(gpio->command_vq);
> - virtio_delete_queue(gpio->interrupt_vq);
> - g_free(gpio->vhost_vqs);
> - virtio_cleanup(vdev);
> - vhost_user_cleanup(&gpio->vhost_user);
> -}
> -
> -static int vu_gpio_connect(DeviceState *dev, Error **errp)
> -{
> - VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> - struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> - int ret;
> -
> - if (gpio->connected) {
> - return 0;
> - }
> - gpio->connected = true;
> -
> - vhost_dev_set_config_notifier(vhost_dev, &gpio_ops);
> - gpio->vhost_user.supports_config = true;
> -
> - gpio->vhost_dev.nvqs = VHOST_NVQS;
> - gpio->vhost_dev.vqs = gpio->vhost_vqs;
> -
> - ret = vhost_dev_init(vhost_dev, &gpio->vhost_user,
> - VHOST_BACKEND_TYPE_USER, 0, errp);
> - if (ret < 0) {
> - return ret;
> - }
> -
> - /* restore vhost state */
> - if (virtio_device_started(vdev, vdev->status)) {
> - vu_gpio_start(vdev);
> - }
> -
> - return 0;
> -}
> -
> -static void vu_gpio_event(void *opaque, QEMUChrEvent event);
> -
> -static void vu_gpio_disconnect(DeviceState *dev)
> -{
> - VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> -
> - if (!gpio->connected) {
> - return;
> - }
> - gpio->connected = false;
> -
> - vu_gpio_stop(vdev);
> - vhost_dev_cleanup(&gpio->vhost_dev);
> -
> - /* Re-instate the event handler for new connections */
> - qemu_chr_fe_set_handlers(&gpio->chardev,
> - NULL, NULL, vu_gpio_event,
> - NULL, dev, NULL, true);
> -}
> -
> -static void vu_gpio_event(void *opaque, QEMUChrEvent event)
> -{
> - DeviceState *dev = opaque;
> - VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(vdev);
> - Error *local_err = NULL;
> -
> - switch (event) {
> - case CHR_EVENT_OPENED:
> - if (vu_gpio_connect(dev, &local_err) < 0) {
> - qemu_chr_fe_disconnect(&gpio->chardev);
> - return;
> - }
> - break;
> - case CHR_EVENT_CLOSED:
> - /* defer close until later to avoid circular close */
> - vhost_user_async_close(dev, &gpio->chardev, &gpio->vhost_dev,
> - vu_gpio_disconnect);
Hmm. Looking at this, it seems that the base device will handle close
synchronously. No? Why isn't this a problem?
> - break;
> - case CHR_EVENT_BREAK:
> - case CHR_EVENT_MUX_IN:
> - case CHR_EVENT_MUX_OUT:
> - /* Ignore */
> - break;
> - }
> -}
> -
> -static int vu_gpio_realize_connect(VHostUserGPIO *gpio, Error **errp)
> +static void vgpio_realize(DeviceState *dev, Error **errp)
> {
> - VirtIODevice *vdev = &gpio->parent_obj;
> - DeviceState *dev = &vdev->parent_obj;
> - struct vhost_dev *vhost_dev = &gpio->vhost_dev;
> - int ret;
> -
> - ret = qemu_chr_fe_wait_connected(&gpio->chardev, errp);
> - if (ret < 0) {
> - return ret;
> - }
> -
> - /*
> - * vu_gpio_connect() may have already connected (via the event
> - * callback) in which case it will just report success.
> - */
> - ret = vu_gpio_connect(dev, errp);
> - if (ret < 0) {
> - qemu_chr_fe_disconnect(&gpio->chardev);
> - return ret;
> - }
> - g_assert(gpio->connected);
> -
> - ret = vhost_dev_get_config(vhost_dev, (uint8_t *)&gpio->config,
> - sizeof(gpio->config), errp);
> -
> - if (ret < 0) {
> - error_report("vhost-user-gpio: get config failed");
> -
> - qemu_chr_fe_disconnect(&gpio->chardev);
> - vhost_dev_cleanup(vhost_dev);
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> -static void vu_gpio_device_realize(DeviceState *dev, Error **errp)
> -{
> - ERRP_GUARD();
> -
> - VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(dev);
> - int retries, ret;
> -
> - if (!gpio->chardev.chr) {
> - error_setg(errp, "vhost-user-gpio: chardev is mandatory");
> - return;
> - }
> + VHostUserBase *vub = VHOST_USER_BASE(dev);
> + VHostUserBaseClass *vubc = VHOST_USER_BASE_GET_CLASS(dev);
>
> - if (!vhost_user_init(&gpio->vhost_user, &gpio->chardev, errp)) {
> - return;
> - }
> + /* Fixed for GPIO */
> + vub->virtio_id = VIRTIO_ID_GPIO;
> + vub->num_vqs = 2;
> + vub->config_size = sizeof(struct virtio_gpio_config);
>
> - virtio_init(vdev, VIRTIO_ID_GPIO, sizeof(gpio->config));
> -
> - gpio->command_vq = virtio_add_queue(vdev, 256, vu_gpio_handle_output);
> - gpio->interrupt_vq = virtio_add_queue(vdev, 256, vu_gpio_handle_output);
> - gpio->vhost_vqs = g_new0(struct vhost_virtqueue, VHOST_NVQS);
> -
> - gpio->connected = false;
> -
> - qemu_chr_fe_set_handlers(&gpio->chardev, NULL, NULL, vu_gpio_event, NULL,
> - dev, NULL, true);
> -
> - retries = REALIZE_CONNECTION_RETRIES;
> - g_assert(!*errp);
> - do {
> - if (*errp) {
> - error_prepend(errp, "Reconnecting after error: ");
> - error_report_err(*errp);
> - *errp = NULL;
> - }
> - ret = vu_gpio_realize_connect(gpio, errp);
> - } while (ret < 0 && retries--);
> -
> - if (ret < 0) {
> - do_vhost_user_cleanup(vdev, gpio);
> - }
> -
> - return;
> -}
> -
> -static void vu_gpio_device_unrealize(DeviceState *dev)
> -{
> - VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> - VHostUserGPIO *gpio = VHOST_USER_GPIO(dev);
> -
> - vu_gpio_set_status(vdev, 0);
> - qemu_chr_fe_set_handlers(&gpio->chardev, NULL, NULL, NULL, NULL, NULL,
> NULL,
> - false);
> - vhost_dev_cleanup(&gpio->vhost_dev);
> - do_vhost_user_cleanup(vdev, gpio);
> + vubc->parent_realize(dev, errp);
> }
>
> static const VMStateDescription vu_gpio_vmstate = {
> @@ -400,31 +37,21 @@ static const VMStateDescription vu_gpio_vmstate = {
> .unmigratable = 1,
> };
>
> -static Property vu_gpio_properties[] = {
> - DEFINE_PROP_CHR("chardev", VHostUserGPIO, chardev),
> - DEFINE_PROP_END_OF_LIST(),
> -};
> -
> static void vu_gpio_class_init(ObjectClass *klass, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(klass);
> - VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
> + VHostUserBaseClass *vubc = VHOST_USER_BASE_CLASS(klass);
>
> - device_class_set_props(dc, vu_gpio_properties);
> dc->vmsd = &vu_gpio_vmstate;
> + device_class_set_props(dc, vgpio_properties);
> + device_class_set_parent_realize(dc, vgpio_realize,
> + &vubc->parent_realize);
> set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
> - vdc->realize = vu_gpio_device_realize;
> - vdc->unrealize = vu_gpio_device_unrealize;
> - vdc->get_features = vu_gpio_get_features;
> - vdc->get_config = vu_gpio_get_config;
> - vdc->set_status = vu_gpio_set_status;
> - vdc->guest_notifier_mask = vu_gpio_guest_notifier_mask;
> - vdc->get_vhost = vu_gpio_get_vhost;
> }
>
> static const TypeInfo vu_gpio_info = {
> .name = TYPE_VHOST_USER_GPIO,
> - .parent = TYPE_VIRTIO_DEVICE,
> + .parent = TYPE_VHOST_USER_BASE,
> .instance_size = sizeof(VHostUserGPIO),
> .class_init = vu_gpio_class_init,
> };
> diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
> index b5c1a461e3..87042e5901 100644
> --- a/hw/virtio/meson.build
> +++ b/hw/virtio/meson.build
> @@ -21,10 +21,13 @@ if have_vhost
>
> # MMIO Stubs
> system_virtio_ss.add(files('vhost-user-device.c'))
> + system_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true:
> files('vhost-user-gpio.c'))
> system_virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true:
> files('vhost-user-rng.c'))
>
> # PCI Stubs
> system_virtio_ss.add(when: 'CONFIG_VIRTIO_PCI', if_true:
> files('vhost-user-device-pci.c'))
> + system_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI',
> 'CONFIG_VHOST_USER_GPIO'],
> + if_true: files('vhost-user-gpio-pci.c'))
> system_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI',
> 'CONFIG_VHOST_USER_RNG'],
> if_true: files('vhost-user-rng-pci.c'))
> endif
> @@ -44,8 +47,6 @@ specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_VSOCK',
> if_true: files('vhost-us
> specific_virtio_ss.add(when: 'CONFIG_VIRTIO_RNG', if_true:
> files('virtio-rng.c'))
> specific_virtio_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true:
> files('virtio-mem.c'))
> specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true:
> files('vhost-user-i2c.c'))
> -specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true:
> files('vhost-user-gpio.c'))
> -specific_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI',
> 'CONFIG_VHOST_USER_GPIO'], if_true: files('vhost-user-gpio-pci.c'))
> specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_SCMI', if_true:
> files('vhost-user-scmi.c'))
> specific_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI',
> 'CONFIG_VHOST_USER_SCMI'], if_true: files('vhost-user-scmi-pci.c'))
>
> --
> 2.39.2
- Re: [PATCH v5 3/6] hw/virtio: derive vhost-user-gpio from vhost-user-base,
Michael S. Tsirkin <=