qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 34/47] hw/microblaze: use qemu_configure_nic_device()


From: David Woodhouse
Subject: [PULL 34/47] hw/microblaze: use qemu_configure_nic_device()
Date: Thu, 1 Feb 2024 16:43:59 +0000

From: David Woodhouse <dwmw@amazon.co.uk>

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
 hw/microblaze/petalogix_ml605_mmu.c      | 3 +--
 hw/microblaze/petalogix_s3adsp1800_mmu.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/hw/microblaze/petalogix_ml605_mmu.c 
b/hw/microblaze/petalogix_ml605_mmu.c
index fb7889cf67..0f5fabc32e 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -133,7 +133,6 @@ petalogix_ml605_init(MachineState *machine)
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
 
     /* axi ethernet and dma initialization. */
-    qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
     eth0 = qdev_new("xlnx.axi-ethernet");
     dma = qdev_new("xlnx.axi-dma");
 
@@ -145,7 +144,7 @@ petalogix_ml605_init(MachineState *machine)
                                   "axistream-connected-target", NULL);
     cs = object_property_get_link(OBJECT(dma),
                                   "axistream-control-connected-target", NULL);
-    qdev_set_nic_properties(eth0, &nd_table[0]);
+    qemu_configure_nic_device(eth0, true, NULL);
     qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
     qdev_prop_set_uint32(eth0, "txmem", 0x1000);
     object_property_set_link(OBJECT(eth0), "axistream-connected", ds,
diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c 
b/hw/microblaze/petalogix_s3adsp1800_mmu.c
index 505639c298..dad46bd7f9 100644
--- a/hw/microblaze/petalogix_s3adsp1800_mmu.c
+++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c
@@ -114,9 +114,8 @@ petalogix_s3adsp1800_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
 
-    qemu_check_nic_model(&nd_table[0], "xlnx.xps-ethernetlite");
     dev = qdev_new("xlnx.xps-ethernetlite");
-    qdev_set_nic_properties(dev, &nd_table[0]);
+    qemu_configure_nic_device(dev, true, NULL);
     qdev_prop_set_uint32(dev, "tx-ping-pong", 0);
     qdev_prop_set_uint32(dev, "rx-ping-pong", 0);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-- 
2.43.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]