qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v3] vfio/pci: migration: Skip config space check for Vendor S


From: Alex Williamson
Subject: Re: [PATCH v3] vfio/pci: migration: Skip config space check for Vendor Specific Information in VSC during restore/load
Date: Wed, 27 Mar 2024 11:39:15 -0600

On Fri, 22 Mar 2024 12:12:10 +0530
Vinayak Kale <vkale@nvidia.com> wrote:

> In case of migration, during restore operation, qemu checks config space of 
> the
> pci device with the config space in the migration stream captured during save
> operation. In case of config space data mismatch, restore operation is failed.
> 
> config space check is done in function get_pci_config_device(). By default VSC
> (vendor-specific-capability) in config space is checked.
> 
> Due to qemu's config space check for VSC, live migration is broken across 
> NVIDIA
> vGPU devices in situation where source and destination host driver is 
> different.
> In this situation, Vendor Specific Information in VSC varies on the 
> destination
> to ensure vGPU feature capabilities exposed to the guest driver are compatible
> with destination host.
> 
> If a vfio-pci device is migration capable and vfio-pci vendor driver is OK 
> with
> volatile Vendor Specific Info in VSC then qemu should exempt config space 
> check
> for Vendor Specific Info. It is vendor driver's responsibility to ensure that
> VSC is consistent across migration. Here consistency could mean that VSC 
> format
> should be same on source and destination, however actual Vendor Specific Info
> may not be byte-to-byte identical.
> 
> This patch skips the check for Vendor Specific Information in VSC for VFIO-PCI
> device by clearing pdev->cmask[] offsets. Config space check is still enforced
> for 3 byte VSC header. If cmask[] is not set for an offset, then qemu skips
> config space check for that offset.
> 
> Signed-off-by: Vinayak Kale <vkale@nvidia.com>
> ---
> Version History
> v2->v3:
>     - Config space check skipped only for Vendor Specific Info in VSC, check 
> is
>       still enforced for 3 byte VSC header.
>     - Updated commit description with live migration failure scenario.
> v1->v2:
>     - Limited scope of change to vfio-pci devices instead of all pci devices.
> 
>  hw/vfio/pci.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)


Acked-by: Alex Williamson <alex.williamson@redhat.com>

 
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index d7fe06715c..1026cdba18 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -2132,6 +2132,27 @@ static void vfio_check_af_flr(VFIOPCIDevice *vdev, 
> uint8_t pos)
>      }
>  }
>  
> +static int vfio_add_vendor_specific_cap(VFIOPCIDevice *vdev, int pos,
> +                                        uint8_t size, Error **errp)
> +{
> +    PCIDevice *pdev = &vdev->pdev;
> +
> +    pos = pci_add_capability(pdev, PCI_CAP_ID_VNDR, pos, size, errp);
> +    if (pos < 0) {
> +        return pos;
> +    }
> +
> +    /*
> +     * Exempt config space check for Vendor Specific Information during 
> restore/load.
> +     * Config space check is still enforced for 3 byte VSC header.
> +     */
> +    if (size > 3) {
> +        memset(pdev->cmask + pos + 3, 0, size - 3);
> +    }
> +
> +    return pos;
> +}
> +
>  static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
>  {
>      PCIDevice *pdev = &vdev->pdev;
> @@ -2199,6 +2220,9 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, 
> uint8_t pos, Error **errp)
>          vfio_check_af_flr(vdev, pos);
>          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
>          break;
> +    case PCI_CAP_ID_VNDR:
> +        ret = vfio_add_vendor_specific_cap(vdev, pos, size, errp);
> +        break;
>      default:
>          ret = pci_add_capability(pdev, cap_id, pos, size, errp);
>          break;




reply via email to

[Prev in Thread] Current Thread [Next in Thread]