[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [Qemu-devel][PATCH v9 1/1] Add USB option in machine opti
From: |
Blue Swirl |
Subject: |
Re: [Qemu-ppc] [Qemu-devel][PATCH v9 1/1] Add USB option in machine options |
Date: |
Sun, 26 Aug 2012 17:34:34 +0000 |
On Sat, Aug 25, 2012 at 2:27 PM, Alexander Graf <address@hidden> wrote:
>
>
> On 25.08.2012, at 00:43, Blue Swirl <address@hidden> wrote:
>
>> On Wed, Aug 22, 2012 at 10:31 AM, Li Zhang <address@hidden> wrote:
>>> When -usb option is used, global varible usb_enabled is set.
>>> And all the plafrom will create one USB controller according
>>> to this variable. In fact, global varibles make code hard
>>> to read.
>>>
>>> So this patch is to remove global variable usb_enabled and
>>> add USB option in machine options. All the plaforms will get
>>> USB option value from machine options.
>>>
>>> USB option of machine options will be set either by:
>>> * -usb
>>> * -machine type=pseries,usb=on
>>>
>>> Both these ways can work now. They both set USB option in
>>> machine options. In the future, the first way will be removed.
>>>
>>> Signed-off-by: Li Zhang <address@hidden>
>>> ---
>>> v7->v8 :
>>> * Declare usb_enabled() and set_usb_option() in sysemu.h
>>> * Separate USB enablement on sPAPR platform.
>>>
>>> v8->v9:
>>> * Fix usb_enable() default value on sPAPR and MAC99
>>>
>>> Signed-off-by: Li Zhang <address@hidden>
>>>
>>> diff --git a/hw/nseries.c b/hw/nseries.c
>>> index 4df2670..c67e95a 100644
>>> --- a/hw/nseries.c
>>> +++ b/hw/nseries.c
>>> @@ -1322,7 +1322,7 @@ static void n8x0_init(ram_addr_t ram_size, const char
>>> *boot_device,
>>> n8x0_dss_setup(s);
>>> n8x0_cbus_setup(s);
>>> n8x0_uart_setup(s);
>>> - if (usb_enabled)
>>> + if (usb_enabled(false))
>>
>> Please add braces.
>>
>> I don't like this usb_enabled(false) way very much but I don't have
>> anything better to suggest.
>>
>>> n8x0_usb_setup(s);
>>>
>>> if (kernel_filename) {
>>> diff --git a/hw/pc_piix.c b/hw/pc_piix.c
>>> index 0c0096f..b662192 100644
>>> --- a/hw/pc_piix.c
>>> +++ b/hw/pc_piix.c
>>> @@ -267,7 +267,7 @@ static void pc_init1(MemoryRegion *system_memory,
>>> pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
>>> floppy, idebus[0], idebus[1], rtc_state);
>>>
>>> - if (pci_enabled && usb_enabled) {
>>> + if (pci_enabled && usb_enabled(false)) {
>>> pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
>>> }
>>>
>>> diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
>>> index e95cfe8..1d4f494 100644
>>> --- a/hw/ppc_newworld.c
>>> +++ b/hw/ppc_newworld.c
>>> @@ -348,10 +348,6 @@ static void ppc_core99_init (ram_addr_t ram_size,
>>> ide_mem[1] = pmac_ide_init(hd, pic[0x0d], dbdma, 0x16, pic[0x02]);
>>> ide_mem[2] = pmac_ide_init(&hd[MAX_IDE_DEVS], pic[0x0e], dbdma, 0x1a,
>>> pic[0x02]);
>>>
>>> - /* cuda also initialize ADB */
>>> - if (machine_arch == ARCH_MAC99_U3) {
>>> - usb_enabled = 1;
>>> - }
>>> cuda_init(&cuda_mem, pic[0x19]);
>>>
>>> adb_kbd_init(&adb_bus);
>>> @@ -360,15 +356,14 @@ static void ppc_core99_init (ram_addr_t ram_size,
>>> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem,
>>> dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
>>>
>>> - if (usb_enabled) {
>>> + if (usb_enabled(machine_arch == ARCH_MAC99_U3)) {
>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>> - }
>>> -
>>> - /* U3 needs to use USB for input because Linux doesn't support via-cuda
>>> - on PPC64 */
>>> - if (machine_arch == ARCH_MAC99_U3) {
>>> - usbdevice_create("keyboard");
>>> - usbdevice_create("mouse");
>>> + /* U3 needs to use USB for input because Linux doesn't support
>>> via-cuda
>>> + on PPC64 */
>>> + if (machine_arch == ARCH_MAC99_U3) {
>>> + usbdevice_create("keyboard");
>>> + usbdevice_create("mouse");
>>> + }
>>> }
>>>
>>> if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
>>> diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
>>> index 1dcd8a6..1468a32 100644
>>> --- a/hw/ppc_oldworld.c
>>> +++ b/hw/ppc_oldworld.c
>>> @@ -286,7 +286,7 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
>>> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_343S1201, 1, pic_mem,
>>> dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
>>>
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>> }
>>>
>>> diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
>>> index 7a87616..feeb903 100644
>>> --- a/hw/ppc_prep.c
>>> +++ b/hw/ppc_prep.c
>>> @@ -662,7 +662,7 @@ static void ppc_prep_init (ram_addr_t ram_size,
>>> memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
>>> #endif
>>>
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>> }
>>>
>>> diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
>>> index d5f1420..4787279 100644
>>> --- a/hw/pxa2xx.c
>>> +++ b/hw/pxa2xx.c
>>> @@ -2108,7 +2108,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
>>> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>>> }
>>>
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> sysbus_create_simple("sysbus-ohci", 0x4c000000,
>>> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>>> }
>>> @@ -2239,7 +2239,7 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space,
>>> unsigned int sdram_size)
>>> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>>> }
>>>
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> sysbus_create_simple("sysbus-ohci", 0x4c000000,
>>> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>>> }
>>> diff --git a/hw/realview.c b/hw/realview.c
>>> index 19db4d0..a8d6f97 100644
>>> --- a/hw/realview.c
>>> +++ b/hw/realview.c
>>> @@ -227,7 +227,7 @@ static void realview_init(ram_addr_t ram_size,
>>> sysbus_connect_irq(busdev, 2, pic[50]);
>>> sysbus_connect_irq(busdev, 3, pic[51]);
>>> pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>> }
>>> n = drive_get_max_bus(IF_SCSI);
>>> diff --git a/hw/spapr.c b/hw/spapr.c
>>> index be533ee..2e31797 100644
>>> --- a/hw/spapr.c
>>> +++ b/hw/spapr.c
>>> @@ -766,7 +766,7 @@ static void ppc_spapr_init(ram_addr_t ram_size,
>>> spapr->has_graphics = true;
>>> }
>>>
>>> - if (usb_enabled) {
>>> + if (usb_enabled(spapr->has_graphics)) {
>>> pci_create_simple(QLIST_FIRST(&spapr->phbs)->host_state.bus,
>>> -1, "pci-ohci");
>>> if (spapr->has_graphics) {
>>> diff --git a/hw/versatilepb.c b/hw/versatilepb.c
>>> index 7a92034..df32c8b 100644
>>> --- a/hw/versatilepb.c
>>> +++ b/hw/versatilepb.c
>>> @@ -247,7 +247,7 @@ static void versatile_init(ram_addr_t ram_size,
>>> pci_nic_init_nofail(nd, "rtl8139", NULL);
>>> }
>>> }
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>> }
>>> n = drive_get_max_bus(IF_SCSI);
>>> diff --git a/qemu-config.c b/qemu-config.c
>>> index c05ffbc..d1a86cf 100644
>>> --- a/qemu-config.c
>>> +++ b/qemu-config.c
>>> @@ -612,6 +612,10 @@ static QemuOptsList qemu_machine_opts = {
>>> .name = "dump-guest-core",
>>> .type = QEMU_OPT_BOOL,
>>> .help = "Include guest memory in a core dump",
>>> + },{
>>> + .name = "usb",
>>> + .type = QEMU_OPT_BOOL,
>>> + .help = "Set on/off to enable/disable usb",
>>> },
>>> { /* End of list */ }
>>> },
>>> diff --git a/sysemu.h b/sysemu.h
>>> index 65552ac..be0905e 100644
>>> --- a/sysemu.h
>>> +++ b/sysemu.h
>>> @@ -119,7 +119,6 @@ extern const char *keyboard_layout;
>>> extern int win2k_install_hack;
>>> extern int alt_grab;
>>> extern int ctrl_grab;
>>> -extern int usb_enabled;
>>> extern int smp_cpus;
>>> extern int max_cpus;
>>> extern int cursor_hide;
>>> @@ -189,4 +188,8 @@ void register_devices(void);
>>> void add_boot_device_path(int32_t bootindex, DeviceState *dev,
>>> const char *suffix);
>>> char *get_boot_devices_list(uint32_t *size);
>>> +
>>> +bool usb_enabled(bool default_usb);
>>> +void set_usb_option(bool usb_option);
>>> +
>>> #endif
>>> diff --git a/vl.c b/vl.c
>>> index 7c577fa..4702e33 100644
>>> --- a/vl.c
>>> +++ b/vl.c
>>> @@ -203,7 +203,6 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
>>> CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
>>> CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
>>> int win2k_install_hack = 0;
>>> -int usb_enabled = 0;
>>> int singlestep = 0;
>>> int smp_cpus = 1;
>>> int max_cpus = 0;
>>> @@ -790,6 +789,27 @@ static int parse_sandbox(QemuOpts *opts, void *opaque)
>>> return 0;
>>> }
>>>
>>> +/*********QEMU USB setting******/
>>> +bool usb_enabled(bool default_usb)
>>> +{
>>> + QemuOpts *mach_opts;
>>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>>> + if (mach_opts) {
>>> + return qemu_opt_get_bool(mach_opts, "usb", default_usb);
>>> + }
>>> + return default_usb;
>>> +}
>>
>> It would be more optimal to go through the options only once after
>> machine selection in vl.c, setting some flags as a result. Then this
>> and below functions would only check against those flags.
>
> This is not a performance critical code path, right? So I'd prefer to have a
> single point of information (machine opts) rather than yet another global
> variable.
The flags don't have to be global, they can be static to vl.c.
>
> Alex
>
>>
>>> +
>>> +void set_usb_option(bool usb_option)
>>> +{
>>> + QemuOpts *mach_opts;
>>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>>> + if (mach_opts) {
>>> + qemu_opt_set_bool(mach_opts, "usb", usb_option);
>>> + }
>>> +}
>>> +
>>> +
>>> /***********************************************************/
>>> /* QEMU Block devices */
>>>
>>> @@ -1078,8 +1098,9 @@ static int usb_device_add(const char *devname)
>>> const char *p;
>>> USBDevice *dev = NULL;
>>>
>>> - if (!usb_enabled)
>>> + if (!usb_enabled(false)) {
>>> return -1;
>>> + }
>>>
>>> /* drivers with .usbdevice_name entry in USBDeviceInfo */
>>> dev = usbdevice_create(devname);
>>> @@ -1115,8 +1136,9 @@ static int usb_device_del(const char *devname)
>>> if (strstart(devname, "host:", &p))
>>> return usb_host_device_close(p);
>>>
>>> - if (!usb_enabled)
>>> + if (!usb_enabled(false)) {
>>> return -1;
>>> + }
>>>
>>> p = strchr(devname, '.');
>>> if (!p)
>>> @@ -3062,10 +3084,10 @@ int main(int argc, char **argv, char **envp)
>>> }
>>> break;
>>> case QEMU_OPTION_usb:
>>> - usb_enabled = 1;
>>> + set_usb_option(true);
>>> break;
>>> case QEMU_OPTION_usbdevice:
>>> - usb_enabled = 1;
>>> + set_usb_option(true);
>>> add_device_config(DEV_USB, optarg);
>>> break;
>>> case QEMU_OPTION_device:
>>> @@ -3623,7 +3645,7 @@ int main(int argc, char **argv, char **envp)
>>> current_machine = machine;
>>>
>>> /* init USB devices */
>>> - if (usb_enabled) {
>>> + if (usb_enabled(false)) {
>>> if (foreach_device_config(DEV_USB, usb_parse) < 0)
>>> exit(1);
>>> }
>>> --
>>> 1.7.7.6
>>>
>>>
>>