[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [RFC PATCH v4 1/5] spapr: Initialize hotplug memory addre
From: |
David Gibson |
Subject: |
Re: [Qemu-ppc] [RFC PATCH v4 1/5] spapr: Initialize hotplug memory address space |
Date: |
Tue, 23 Jun 2015 11:33:58 +1000 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Fri, Jun 19, 2015 at 03:47:53PM +0530, Bharata B Rao wrote:
> Initialize a hotplug memory region under which all the hotplugged
> memory is accommodated. Also enable memory hotplug by setting
> CONFIG_MEM_HOTPLUG.
>
> Modelled on i386 memory hotplug.
>
> Signed-off-by: Bharata B Rao <address@hidden>
> ---
> default-configs/ppc64-softmmu.mak | 1 +
> hw/ppc/spapr.c | 28 ++++++++++++++++++++++++++++
> include/hw/ppc/spapr.h | 12 ++++++++++++
> 3 files changed, 41 insertions(+)
>
> diff --git a/default-configs/ppc64-softmmu.mak
> b/default-configs/ppc64-softmmu.mak
> index ab62cc7..e77cb1a 100644
> --- a/default-configs/ppc64-softmmu.mak
> +++ b/default-configs/ppc64-softmmu.mak
> @@ -52,3 +52,4 @@ CONFIG_XICS_KVM=$(and $(CONFIG_PSERIES),$(CONFIG_KVM))
> # For PReP
> CONFIG_MC146818RTC=y
> CONFIG_ISA_TESTDEV=y
> +CONFIG_MEM_HOTPLUG=y
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 5ca817c..87a29dc 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -1549,6 +1549,34 @@ static void ppc_spapr_init(MachineState *machine)
> memory_region_add_subregion(sysmem, 0, rma_region);
> }
>
> + /* initialize hotplug memory address space */
> + if (machine->ram_size < machine->maxram_size) {
> + ram_addr_t hotplug_mem_size = machine->maxram_size -
> machine->ram_size;
> +
> + if (machine->ram_slots > SPAPR_MAX_RAM_SLOTS) {
> + error_report("unsupported amount of memory slots: %"PRIu64,
> + machine->ram_slots);
> + exit(EXIT_FAILURE);
> + }
> +
> + spapr->hotplug_memory.base = ROUND_UP(machine->ram_size,
> + SPAPR_HOTPLUG_MEM_ALIGN);
> +
> + hotplug_mem_size += SPAPR_HOTPLUG_MEM_ALIGN * machine->ram_slots;
I'm not sure what this adjustment is about. Are you putting a gap of
size SPAPR_HOTPLUG_MEM_ALIGN between each memory slot? That doesn't
see to match the DRC initialization code in the next patch which
assigns all the LMBs in the hotplug area contiguous addresses.
> + if ((spapr->hotplug_memory.base + hotplug_mem_size) <
> + hotplug_mem_size) {
> + error_report("unsupported amount of maximum memory: "
> RAM_ADDR_FMT,
> + machine->maxram_size);
> + exit(EXIT_FAILURE);
> + }
> +
> + memory_region_init(&spapr->hotplug_memory.mr, OBJECT(spapr),
> + "hotplug-memory", hotplug_mem_size);
> + memory_region_add_subregion(sysmem, spapr->hotplug_memory.base,
> + &spapr->hotplug_memory.mr);
> + }
> +
> filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
> if (!filename) {
> error_report("Could not find LPAR rtas '%s'", "spapr-rtas.bin");
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index 91a61ab..8a1929b 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -5,6 +5,7 @@
> #include "hw/boards.h"
> #include "hw/ppc/xics.h"
> #include "hw/ppc/spapr_drc.h"
> +#include "hw/mem/pc-dimm.h"
>
> struct VIOsPAPRBus;
> struct sPAPRPHBState;
> @@ -76,6 +77,7 @@ struct sPAPRMachineState {
>
> /*< public >*/
> char *kvm_type;
> + MemoryHotplugState hotplug_memory;
> };
>
> #define H_SUCCESS 0
> @@ -609,4 +611,14 @@ int spapr_rtc_import_offset(DeviceState *dev, int64_t
> legacy_offset);
>
> #define SPAPR_MEMORY_BLOCK_SIZE (1 << 28) /* 256MB */
>
> +/*
> + * This defines the maximum number of DIMM slots we can have for sPAPR
> + * guest. This is not defined by sPAPR but we are defining it to 32 slots
> + * based on default number of slots provided by PowerPC kernel.
> + */
> +#define SPAPR_MAX_RAM_SLOTS 32
> +
> +/* 1GB alignment for hotplug memory region */
> +#define SPAPR_HOTPLUG_MEM_ALIGN (1ULL << 30)
> +
> #endif /* !defined (__HW_SPAPR_H__) */
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgprks1e0b1px.pgp
Description: PGP signature
[Qemu-ppc] [RFC PATCH v4 2/5] spapr: Add LMB DR connectors, Bharata B Rao, 2015/06/19