[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-ppc] [PATCH v3 0/8] pnv: improvement of LPC support and IPMI suppo
From: |
Cédric Le Goater |
Subject: |
[Qemu-ppc] [PATCH v3 0/8] pnv: improvement of LPC support and IPMI support |
Date: |
Tue, 11 Apr 2017 17:29:58 +0200 |
Hello,
The first patches improve the LPC support for the POWER8NVL (nvlink)
systems and for multichip systems. Next, we add IPMI support to the
machine which is required to power off and reboot a PowerNV system. To
make use of it, a BT device and an BMC simulator need to be defined on
the command line:
-device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10
To improve the sensor and FRU support, one can use the following
options for the simulator:
sdrfile=./palmetto-SDR.bin,fruareasize=256,frudatafile=./palmetto-FRU.bin
To test, grab a kernel and a rootfs image here :
https://openpower.xyz/job/openpower-op-build/distro=ubuntu,target=palmetto/lastSuccessfulBuild/artifact/images/zImage.epapr
https://openpower.xyz/job/openpower-op-build/distro=ubuntu,target=palmetto/lastSuccessfulBuild/artifact/images/rootfs.cpio.xz
The full patchset is available here :
https://github.com/legoater/qemu/commits/powernv-ipmi-2.9
Thanks,
C.
Changes since v2:
- used PNV_LPC() macro to cast the 'opaque' parameter
- introduced a pnv_chip_lpc_offset() routine to locate the LPC node
of a chip
- set the "primary" property on the LPC bus of chip 0 from the machine
- used the pnv_chip_lpc_offset() routine to scan the default LPC bus
- removed the initializer of io_base
Changes since v1:
- moved the IRQ handler in pnv_lpc.c and introduced pnv_lpc_isa_irq_create()
- only add the "primary" property on the LPC bus of chip 0
- reworked the assignement of the ISA IO base in the 'reg' array
property
- changed the type of the 'bmc' attribute of the machine
Benjamin Herrenschmidt (1):
ppc/pnv: Add support for POWER8+ LPC Controller
Cédric Le Goater (7):
ppc/pnv: enable only one LPC bus
ppc/pnv: scan ISA bus to populate device tree
ppc/pnv: populate device tree for RTC devices
ppc/pnv: populate device tree for serial devices
ppc/pnv: populate device tree for IPMI BT devices
ppc/pnv: add initial IPMI sensors for the BMC simulator
ppc/pnv: generate an OEM SEL event on shutdown
hw/ppc/Makefile.objs | 2 +-
hw/ppc/pnv.c | 228 ++++++++++++++++++++++++++++++++++++++---------
hw/ppc/pnv_bmc.c | 122 +++++++++++++++++++++++++
hw/ppc/pnv_lpc.c | 106 +++++++++++++++++++---
include/hw/ppc/pnv.h | 11 +++
include/hw/ppc/pnv_lpc.h | 8 ++
6 files changed, 425 insertions(+), 52 deletions(-)
create mode 100644 hw/ppc/pnv_bmc.c
--
2.7.4
- [Qemu-ppc] [PATCH v3 0/8] pnv: improvement of LPC support and IPMI support,
Cédric Le Goater <=
- [Qemu-ppc] [PATCH v3 1/8] ppc/pnv: Add support for POWER8+ LPC Controller, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 2/8] ppc/pnv: enable only one LPC bus, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 3/8] ppc/pnv: scan ISA bus to populate device tree, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 4/8] ppc/pnv: populate device tree for RTC devices, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 5/8] ppc/pnv: populate device tree for serial devices, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 6/8] ppc/pnv: populate device tree for IPMI BT devices, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 8/8] ppc/pnv: generate an OEM SEL event on shutdown, Cédric Le Goater, 2017/04/11
- [Qemu-ppc] [PATCH v3 7/8] ppc/pnv: add initial IPMI sensors for the BMC simulator, Cédric Le Goater, 2017/04/11
- Re: [Qemu-ppc] [PATCH v3 0/8] pnv: improvement of LPC support and IPMI support, David Gibson, 2017/04/12