[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v9 0/6] Add vTPM emulator support for ppc64 platform
From: |
David Gibson |
Subject: |
Re: [PATCH v9 0/6] Add vTPM emulator support for ppc64 platform |
Date: |
Wed, 29 Jan 2020 13:08:02 +1100 |
On Tue, Jan 21, 2020 at 10:29:29AM -0500, Stefan Berger wrote:
>
> The following series of patches adds vTPM emulator support for the
> ppc64 platform (pSeries).
>
> It can be tested as follows with swtpm/libtpms:
>
> mkdir /tmp/mytpm1
> swtpm socket --tpmstate dir=/tmp/mytpm1 \
> --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
> --log level=20
>
> If TPM 2 is desired, add --tpm2 as parameter to the above.
>
> In another terminal start QEMU:
>
> sudo ./ppc64-softmmu/qemu-system-ppc64 -display sdl \
> -machine pseries,accel=kvm \
> -m 1024 -bios slof.bin -boot menu=on \
> -nodefaults -device VGA -device pci-ohci -device usb-kbd \
> -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
> -tpmdev emulator,id=tpm0,chardev=chrtpm \
> -device tpm-spapr,tpmdev=tpm0 \
> -device spapr-vscsi,id=scsi0,reg=0x00002000 \
> -device
> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0
> \
> -drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
>
> Links:
> - libtpms: https://github.com/stefanberger/libtpms/wiki
> - swtpm: https://github.com/stefanberger/swtpm/wiki
Applied to ppc-for-5.0, thanks.
>
> Changes:
> v8->v9:
> - Allocating buffer now so we can use VMSTATE_VBUFFER_UINT32 for the regular
> buffer (no more suspend buffer)
>
> v7->v8:
> - Folded documentation patch into 3rd patch
> - Added Marc-André's patch to end of series
>
> v6->v7:
> - Implemented get_dt_compatible() and using it
> - Moved tpm_this_show_buffer to tpm_util.c
>
> v5->v6:
> - adjusted names of structures and simplified
> - only transmitting min. necessary bytes to pass to VM after resume
> - addressed other issues pointed out by D. Gibson
>
> v4->v5:
> - use runstate_check(RUN_STATE_FINISH_MIGRATE) to check whether devices
> are suspending; ditch 3 patches in this series that tried to do similar
>
> v3->v4:
> - addressed comments to v3
> - reworked suspend/resume support that requires extensions to backends
>
> v2->v3:
> - patch 1: a TPM 2 is identified by IBM,vtpm20 in the compatible node
> - patch 1: convert to tracing to display Tx and Rx buffers
> - added documentation patch
> - added patch to enable TPM device as part of pSeries
>
> v1->v2:
> - followed Cedric Le Goater's suggestions to patch 1
> - send appropriate CRQ error responses if DMA read or write fails
> - renamed tpm_spapr_got_payload to tpm_spapr_process_cmd and
> pass endianess-adjusted data pointer from CRQ to it
>
> Regards,
> Stefan
>
>
> Marc-André Lureau (1):
> docs/specs/tpm: reST-ify TPM documentation
>
> Stefan Berger (5):
> tpm: Move tpm_tis_show_buffer to tpm_util.c
> spapr: Implement get_dt_compatible() callback
> tpm_spapr: Support TPM for ppc64 using CRQ based interface
> tpm_spapr: Support suspend and resume
> hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config
>
> docs/specs/index.rst | 1 +
> docs/specs/tpm.rst | 503 +++++++++++++++++++++++++++++++++++++
> docs/specs/tpm.txt | 427 -------------------------------
> hw/ppc/Kconfig | 1 +
> hw/ppc/spapr_vio.c | 11 +-
> hw/tpm/Kconfig | 6 +
> hw/tpm/Makefile.objs | 1 +
> hw/tpm/tpm_spapr.c | 429 +++++++++++++++++++++++++++++++
> hw/tpm/tpm_tis.c | 32 +--
> hw/tpm/tpm_util.c | 25 ++
> hw/tpm/tpm_util.h | 3 +
> hw/tpm/trace-events | 16 +-
> include/hw/ppc/spapr_vio.h | 1 +
> include/sysemu/tpm.h | 3 +
> qapi/tpm.json | 6 +-
> 15 files changed, 1004 insertions(+), 461 deletions(-)
> create mode 100644 docs/specs/tpm.rst
> delete mode 100644 docs/specs/tpm.txt
> create mode 100644 hw/tpm/tpm_spapr.c
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
- [PATCH v9 0/6] Add vTPM emulator support for ppc64 platform, Stefan Berger, 2020/01/21
- [PATCH v9 5/6] hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config, Stefan Berger, 2020/01/21
- [PATCH v9 4/6] tpm_spapr: Support suspend and resume, Stefan Berger, 2020/01/21
- [PATCH v9 1/6] tpm: Move tpm_tis_show_buffer to tpm_util.c, Stefan Berger, 2020/01/21
- [PATCH v9 2/6] spapr: Implement get_dt_compatible() callback, Stefan Berger, 2020/01/21
- [PATCH v9 3/6] tpm_spapr: Support TPM for ppc64 using CRQ based interface, Stefan Berger, 2020/01/21
- [PATCH v9 6/6] docs/specs/tpm: reST-ify TPM documentation, Stefan Berger, 2020/01/21
- Re: [PATCH v9 0/6] Add vTPM emulator support for ppc64 platform,
David Gibson <=