[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 0/2] ppc/pnv: Add models for PHB4 and PHB3 PCIe Host bridges
From: |
Cédric Le Goater |
Subject: |
Re: [PATCH 0/2] ppc/pnv: Add models for PHB4 and PHB3 PCIe Host bridges |
Date: |
Wed, 29 Jan 2020 14:15:35 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2 |
On 1/29/20 7:31 AM, David Gibson wrote:
> On Mon, Jan 27, 2020 at 03:45:04PM +0100, Cédric Le Goater wrote:
>> Hello,
>>
>> These are models for the PCIe Host Bridges, PHB3 and PHB4, as found on
>> POWER8 and POWER9 processors. It includes the PowerBus logic interface
>> (PBCQ), IOMMU support, a single PCIe Gen.3/4 Root Complex, and support
>> for MSI and LSI interrupt sources as found on each system depending on
>> the interrupt controller: XICS or XIVE.
>>
>> No default device layout is provided and PCI devices can be added on
>> any of the available PCIe Root Port (pcie.0 .. 2) with address 0x0 as
>> the firwware (skiboot) only accepts a single device per root port. To
>> run a simple system with a network and a storage adapters, use a
>> command line options such as :
>>
>> -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
>> -netdev
>> bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0
>>
>> -device megasas,id=scsi0,bus=pcie.1,addr=0x0
>> -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
>> -device
>> scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2
>>
>> If more are needed, include a bridge.
>>
>> Multi chip is supported, each chip adding its set of PHB controllers
>> and its PCI busses. The model doesn't emulate the EEH error handling
>> and cold plugging PHB devices still needs some work.
>>
>> XICS requires some adjustment to support the PHB3 MSI. The changes are
>> provided in the PHB3 model but they could be decoupled in prereq
>> patches.
>
> Applied to ppc-for-5.0, thanks.
Should we add a default set of devices on PHB1 like found on OpenPOWER
system ? On a P8 we have :
+-[0001:00]---00.0-[01-07]----00.0-[02-07]--+-01.0-[03-04]----00.0-[04]----00.0
ASPEED Technology, Inc. ASPEED Graphics Family
| +-02.0-[05]----00.0 Texas
Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller
| +-03.0-[06]--+-00.0 Broadcom Inc.
and subsidiaries NetXtreme BCM5718 Gigabit Ethernet PCIe
| | \-00.1 Broadcom Inc.
and subsidiaries NetXtreme BCM5718 Gigabit Ethernet PCIe
| \-04.0-[07]----00.0 Marvell
Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller
C.