qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-trivial] [PATCH] Spelling fixes in comments and documentation


From: Stefan Weil
Subject: Re: [Qemu-trivial] [PATCH] Spelling fixes in comments and documentation
Date: Thu, 16 Aug 2012 14:38:13 +0200
User-agent: Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20120714 Thunderbird/14.0

Ping?


Am 10.08.2012 22:03, schrieb Stefan Weil:
These wrong spellings were detected by codespell:

* successully -> successfully

* alot -> a lot

* wanna -> want to

* infomation -> information

* occured -> occurred

Signed-off-by: Stefan Weil <address@hidden>
---
  docs/specs/ppc-spapr-hcalls.txt |    2 +-
  docs/usb2.txt                   |    4 ++--
  hw/xen_pt.h                     |    4 ++--
  hw/xen_pt_config_init.c         |   14 +++++++-------
  qemu-img.c                      |    2 +-
  qemu-img.texi                   |    2 +-
  6 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/docs/specs/ppc-spapr-hcalls.txt b/docs/specs/ppc-spapr-hcalls.txt
index 52ba8d4..667b3fa 100644
--- a/docs/specs/ppc-spapr-hcalls.txt
+++ b/docs/specs/ppc-spapr-hcalls.txt
@@ -31,7 +31,7 @@ Arguments:
Returns: - H_SUCCESS : Successully called the RTAS function (RTAS result
+  H_SUCCESS   : Successfully called the RTAS function (RTAS result
                  will have been stored in the parameter block)
    H_PARAMETER : Unknown token
diff --git a/docs/usb2.txt b/docs/usb2.txt
index d17e3c0..21f6d14 100644
--- a/docs/usb2.txt
+++ b/docs/usb2.txt
@@ -58,11 +58,11 @@ try ...
  xhci controller support
  -----------------------
-There also is xhci host controller support available. It got alot
+There also is xhci host controller support available.  It got a lot
  less testing than ehci and there are a bunch of known limitations, so
  ehci may work better for you.  On the other hand the xhci hardware
  design is much more virtualization-friendly, thus xhci emulation uses
-less ressources (especially cpu).  If you wanna give xhci a try
+less ressources (especially cpu).  If you want to give xhci a try
  use this to add the host controller ...
qemu -device nec-usb-xhci,id=xhci
diff --git a/hw/xen_pt.h b/hw/xen_pt.h
index 41904ec..112477a 100644
--- a/hw/xen_pt.h
+++ b/hw/xen_pt.h
@@ -96,7 +96,7 @@ typedef struct XenPTRegion {
   * - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
   */
-/* emulated register infomation */
+/* emulated register information */
  struct XenPTRegInfo {
      uint32_t offset;
      uint32_t size;
@@ -140,7 +140,7 @@ typedef int (*xen_pt_reg_size_init_fn)
      (XenPCIPassthroughState *, const XenPTRegGroupInfo *,
       uint32_t base_offset, uint8_t *size);
-/* emulated register group infomation */
+/* emulated register group information */
  struct XenPTRegGroupInfo {
      uint8_t grp_id;
      XenPTRegisterGroupType grp_type;
diff --git a/hw/xen_pt_config_init.c b/hw/xen_pt_config_init.c
index 00eb3d9..e524a40 100644
--- a/hw/xen_pt_config_init.c
+++ b/hw/xen_pt_config_init.c
@@ -562,7 +562,7 @@ static int 
xen_pt_exp_rom_bar_reg_write(XenPCIPassthroughState *s,
      return 0;
  }
-/* Header Type0 reg static infomation table */
+/* Header Type0 reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_header0[] = {
      /* Vendor ID reg */
      {
@@ -753,7 +753,7 @@ static XenPTRegInfo xen_pt_emu_reg_header0[] = {
   * Vital Product Data Capability
   */
-/* Vital Product Data Capability Structure reg static infomation table */
+/* Vital Product Data Capability Structure reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_vpd[] = {
      {
          .offset     = PCI_CAP_LIST_NEXT,
@@ -775,7 +775,7 @@ static XenPTRegInfo xen_pt_emu_reg_vpd[] = {
   * Vendor Specific Capability
   */
-/* Vendor Specific Capability Structure reg static infomation table */
+/* Vendor Specific Capability Structure reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_vendor[] = {
      {
          .offset     = PCI_CAP_LIST_NEXT,
@@ -866,7 +866,7 @@ static int xen_pt_linkctrl2_reg_init(XenPCIPassthroughState 
*s,
      return 0;
  }
-/* PCI Express Capability Structure reg static infomation table */
+/* PCI Express Capability Structure reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_pcie[] = {
      /* Next Pointer reg */
      {
@@ -981,7 +981,7 @@ static int xen_pt_pmcsr_reg_write(XenPCIPassthroughState *s,
      return 0;
  }
-/* Power Management Capability reg static infomation table */
+/* Power Management Capability reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_pm[] = {
      /* Next Pointer reg */
      {
@@ -1259,7 +1259,7 @@ static int 
xen_pt_msgdata_reg_write(XenPCIPassthroughState *s,
      return 0;
  }
-/* MSI Capability Structure reg static infomation table */
+/* MSI Capability Structure reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_msi[] = {
      /* Next Pointer reg */
      {
@@ -1396,7 +1396,7 @@ static int 
xen_pt_msixctrl_reg_write(XenPCIPassthroughState *s,
      return 0;
  }
-/* MSI-X Capability Structure reg static infomation table */
+/* MSI-X Capability Structure reg static information table */
  static XenPTRegInfo xen_pt_emu_reg_msix[] = {
      /* Next Pointer reg */
      {
diff --git a/qemu-img.c b/qemu-img.c
index f20116a..3a21cc1 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -89,7 +89,7 @@ static void help(void)
             "  '-r' tries to repair any inconsistencies that are found during the 
check.\n"
             "       '-r leaks' repairs only cluster leaks, whereas '-r all' fixes 
all\n"
             "       kinds of errors, with a higher risk of choosing the wrong fix 
or\n"
-           "       hiding corruption that has already occured.\n"
+           "       hiding corruption that has already occurred.\n"
             "\n"
             "Parameters to snapshot subcommand:\n"
             "  'snapshot' is the name of the snapshot to create, apply or 
delete\n"
diff --git a/qemu-img.texi b/qemu-img.texi
index 77c6d0b..9f3ac3f 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -77,7 +77,7 @@ Perform a consistency check on the disk image @var{filename}.
  If @code{-r} is specified, qemu-img tries to repair any inconsistencies found
  during the check. @code{-r leaks} repairs only cluster leaks, whereas
  @code{-r all} fixes all kinds of errors, with a higher risk of choosing the
-wrong fix or hiding corruption that has already occured.
+wrong fix or hiding corruption that has already occurred.
Only the formats @code{qcow2}, @code{qed} and @code{vdi} support
  consistency checks.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]