qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-trivial] [PATCH 2/4] Replace '-enable-kvm' with '-accel kvm' in do


From: Thomas Huth
Subject: [Qemu-trivial] [PATCH 2/4] Replace '-enable-kvm' with '-accel kvm' in docs and help texts
Date: Wed, 13 Jun 2018 07:05:19 +0200

The preferred way to select the KVM accelerator is to use "-accel kvm"
these days, so let's be consistent in our documentation and help texts.

Signed-off-by: Thomas Huth <address@hidden>
---
 docs/COLO-FT.txt                  | 8 ++++----
 docs/can.txt                      | 4 ++--
 docs/multi-thread-compression.txt | 2 +-
 docs/multiseat.txt                | 2 +-
 docs/specs/tpm.txt                | 8 ++++----
 hw/block/dataplane/virtio-blk.c   | 4 ++--
 hw/scsi/virtio-scsi-dataplane.c   | 4 ++--
 7 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/docs/COLO-FT.txt b/docs/COLO-FT.txt
index e289be2..d7c7dcd 100644
--- a/docs/COLO-FT.txt
+++ b/docs/COLO-FT.txt
@@ -113,16 +113,16 @@ by using 'x-colo-lost-heartbeat' command.
 == Test procedure ==
 1. Startup qemu
 Primary:
-# qemu-kvm -enable-kvm -m 2048 -smp 2 -qmp stdio -vnc :7 -name primary \
-  -device piix3-usb-uhci \
+# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -name primary \
+  -device piix3-usb-uhci -vnc :7 \
   -device usb-tablet -netdev tap,id=hn0,vhost=off \
   -device virtio-net-pci,id=net-pci0,netdev=hn0 \
   -drive 
if=virtio,id=primary-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,\
          children.0.file.filename=1.raw,\
          children.0.driver=raw -S
 Secondary:
-# qemu-kvm -enable-kvm -m 2048 -smp 2 -qmp stdio -vnc :7 -name secondary \
-  -device piix3-usb-uhci \
+# qemu-system-x86_64 -accel kvm -m 2048 -smp 2 -qmp stdio -name secondary \
+  -device piix3-usb-uhci -vnc :7 \
   -device usb-tablet -netdev tap,id=hn0,vhost=off \
   -device virtio-net-pci,id=net-pci0,netdev=hn0 \
   -drive 
if=none,id=secondary-disk0,file.filename=1.raw,driver=raw,node-name=node0 \
diff --git a/docs/can.txt b/docs/can.txt
index a357105..7ba23b2 100644
--- a/docs/can.txt
+++ b/docs/can.txt
@@ -52,7 +52,7 @@ The ''kvaser_pci'' board/device model is compatible with and 
has been tested wit
 The tested setup was Linux 4.9 kernel on the host and guest side.
 Example for qemu-system-x86_64:
 
-    qemu-system-x86_64 -enable-kvm -kernel /boot/vmlinuz-4.9.0-4-amd64 \
+    qemu-system-x86_64 -accel kvm -kernel /boot/vmlinuz-4.9.0-4-amd64 \
       -initrd ramdisk.cpio \
       -virtfs local,path=shareddir,security_model=none,mount_tag=shareddir \
       -object can-bus,id=canbus0 \
@@ -104,4 +104,4 @@ Links to other resources
      Slides
      
http://rtime.felk.cvut.cz/publications/public/rtlws2015-qemu-can-slides.pdf
  (5) Linux SocketCAN utilities
-     https://github.com/linux-can/can-utils/
\ No newline at end of file
+     https://github.com/linux-can/can-utils/
diff --git a/docs/multi-thread-compression.txt 
b/docs/multi-thread-compression.txt
index d0caaf7..bb88c6b 100644
--- a/docs/multi-thread-compression.txt
+++ b/docs/multi-thread-compression.txt
@@ -62,7 +62,7 @@ RAM: 128G
 NIC: Intel I350 (10/100/1000Mbps)
 Host OS: CentOS 7 64-bit
 Guest OS: RHEL 6.5 64-bit
-Parameter: qemu-system-x86_64 -enable-kvm -smp 4 -m 4096
+Parameter: qemu-system-x86_64 -accel kvm -smp 4 -m 4096
  /share/ia32e_rhel6u5.qcow -monitor stdio
 
 There is no additional application is running on the guest when doing
diff --git a/docs/multiseat.txt b/docs/multiseat.txt
index 807518c..dc28cdb 100644
--- a/docs/multiseat.txt
+++ b/docs/multiseat.txt
@@ -18,7 +18,7 @@ or
 
 Next put together the qemu command line (sdk/gtk):
 
-qemu   -enable-kvm -usb $memory $disk $whatever \
+qemu   -accel kvm -usb $memory $disk $whatever \
        -display [ sdl | gtk ] \
        -vga std \
        -device usb-tablet
diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
index c230c4c..70ad4a0 100644
--- a/docs/specs/tpm.txt
+++ b/docs/specs/tpm.txt
@@ -98,7 +98,7 @@ QEMU files related to the TPM passthrough device:
 Command line to start QEMU with the TPM passthrough device using the host's
 hardware TPM /dev/tpm0:
 
-qemu-system-x86_64 -display sdl -enable-kvm \
+qemu-system-x86_64 -display sdl -accel kvm \
   -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
   -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
   -device tpm-tis,tpmdev=tpm0 test.img
@@ -164,7 +164,7 @@ swtpm socket --tpmstate dir=/tmp/mytpm1 \
 Command line to start QEMU with the TPM emulator device communicating with
 the swtpm:
 
-qemu-system-x86_64 -display sdl -enable-kvm \
+qemu-system-x86_64 -display sdl -accel kvm \
   -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
   -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
   -tpmdev emulator,id=tpm0,chardev=chrtpm \
@@ -222,7 +222,7 @@ swtpm socket --tpmstate dir=/tmp/mytpm1 \
 
 In a 2nd terminal start the VM:
 
-qemu-system-x86_64 -display sdl -enable-kvm \
+qemu-system-x86_64 -display sdl -accel kvm \
   -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
   -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
   -tpmdev emulator,id=tpm0,chardev=chrtpm \
@@ -255,7 +255,7 @@ swtpm socket --tpmstate dir=/tmp/mytpm1 \
 In the 2nd terminal restore the state of the VM using the additonal
 '-incoming' option.
 
-qemu-system-x86_64 -display sdl -enable-kvm \
+qemu-system-x86_64 -display sdl -accel kvm \
   -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
   -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
   -tpmdev emulator,id=tpm0,chardev=chrtpm \
diff --git a/hw/block/dataplane/virtio-blk.c b/hw/block/dataplane/virtio-blk.c
index d648aeb..8c37bd3 100644
--- a/hw/block/dataplane/virtio-blk.c
+++ b/hw/block/dataplane/virtio-blk.c
@@ -190,8 +190,8 @@ int virtio_blk_data_plane_start(VirtIODevice *vdev)
     /* Set up guest notifier (irq) */
     r = k->set_guest_notifiers(qbus->parent, nvqs, true);
     if (r != 0) {
-        fprintf(stderr, "virtio-blk failed to set guest notifier (%d), "
-                "ensure -enable-kvm is set\n", r);
+        error_report("virtio-blk failed to set guest notifier (%d), "
+                     "ensure -accel kvm is set.", r);
         goto fail_guest_notifiers;
     }
 
diff --git a/hw/scsi/virtio-scsi-dataplane.c b/hw/scsi/virtio-scsi-dataplane.c
index 912e500..b995bab 100644
--- a/hw/scsi/virtio-scsi-dataplane.c
+++ b/hw/scsi/virtio-scsi-dataplane.c
@@ -142,8 +142,8 @@ int virtio_scsi_dataplane_start(VirtIODevice *vdev)
     /* Set up guest notifier (irq) */
     rc = k->set_guest_notifiers(qbus->parent, vs->conf.num_queues + 2, true);
     if (rc != 0) {
-        fprintf(stderr, "virtio-scsi: Failed to set guest notifiers (%d), "
-                "ensure -enable-kvm is set\n", rc);
+        error_report("virtio-scsi: Failed to set guest notifiers (%d), "
+                     "ensure -accel kvm is set.", rc);
         goto fail_guest_notifiers;
     }
 
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]