automake-commit
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. Relea


From: Ralf Wildenhues
Subject: [Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. Release-1-10-1-31-g3bdb4fb
Date: Sun, 31 Aug 2008 06:16:35 +0000

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".

http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=3bdb4fb38d73d698708debf102a947ba0b9795fd

The branch, branch-1-10 has been updated
       via  3bdb4fb38d73d698708debf102a947ba0b9795fd (commit)
       via  583d42e26998ddff9cd2b443ef01ef61440cb1bf (commit)
      from  c4b1e8c39d21584a1a0960e174081bb7403dfb28 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 3bdb4fb38d73d698708debf102a947ba0b9795fd
Author: Ralf Wildenhues <address@hidden>
Date:   Thu Aug 28 20:31:37 2008 +0200

    * THANKS: Use Cyrillic name instead of ASCII transcription.
    
    Signed-off-by: Ralf Wildenhues <address@hidden>

commit 583d42e26998ddff9cd2b443ef01ef61440cb1bf
Author: Ralf Wildenhues <address@hidden>
Date:   Sun Aug 31 08:10:59 2008 +0200

    Fix rebuilding of removed subdir/Makefile.in files.
    
    * lib/am/configure.am (%MAKEFILE-IN%) [?!TOPDIR_P?]: If
    subdir/Makefile.in was removed, am--refresh would not update
    it.  Fix up for it by running the per-directory rebuild rule.
    * tests/remake6.test, tests/remake6.test: New tests.
    * tests/Makefile.am: Adjust.
    * NEWS, THANKS: Update.
    Report and initial patch by Ilya N. Golubev.
    
    Signed-off-by: Ralf Wildenhues <address@hidden>

-----------------------------------------------------------------------

Summary of changes:
 ChangeLog                             |   13 +
 Makefile.in                           |    1 +
 NEWS                                  |    3 +
 THANKS                                |    1 +
 aclocal.m4                            |    4 +-
 configure                             | 1347 ++++++++++++++++++---------------
 doc/Makefile.in                       |    5 +-
 lib/Automake/Makefile.in              |    5 +-
 lib/Automake/tests/Makefile.in        |    5 +-
 lib/Makefile.in                       |    5 +-
 lib/am/Makefile.in                    |    5 +-
 lib/am/configure.am                   |   12 +-
 m4/Makefile.in                        |    5 +-
 tests/Makefile.am                     |    2 +
 tests/Makefile.in                     |    7 +-
 tests/{missing6.test => remake6.test} |   55 +-
 tests/{man3.test => remake7.test}     |   58 +-
 17 files changed, 869 insertions(+), 664 deletions(-)
 copy tests/{missing6.test => remake6.test} (50%)
 copy tests/{man3.test => remake7.test} (52%)

diff --git a/ChangeLog b/ChangeLog
index 005d62b..c6ab5c5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,16 @@
+2008-08-31  Ralf Wildenhues  <address@hidden>
+
+       * THANKS: Use Cyrillic name instead of ASCII transcription.
+
+       Fix rebuilding of removed subdir/Makefile.in files.
+       * lib/am/configure.am (%MAKEFILE-IN%) [?!TOPDIR_P?]: If
+       subdir/Makefile.in was removed, am--refresh would not update
+       it.  Fix up for it by running the per-directory rebuild rule.
+       * tests/remake6.test, tests/remake7.test: New tests.
+       * tests/Makefile.am: Adjust.
+       * NEWS, THANKS: Update.
+       Report and initial patch by Ilya N. Golubev.
+
 2008-08-19  Ralf Wildenhues  <address@hidden>
 
        Fix maintainer-check failure.
diff --git a/Makefile.in b/Makefile.in
index 43c3ce3..8e156a2 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -160,6 +160,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 SUBDIRS = lib . doc m4 tests
diff --git a/NEWS b/NEWS
index 0e92a3d..294f8e0 100644
--- a/NEWS
+++ b/NEWS
@@ -4,6 +4,9 @@ Bugs fixed in 1.10.1a:
 
 * Long standing bugs:
 
+  - Rebuild rules now also work for a removed `subdir/Makefile.in' in
+    an otherwise up to date tree.
+
 * Bugs introduced by 1.10.1:
 
 
diff --git a/THANKS b/THANKS
index 2e73963..e637159 100644
--- a/THANKS
+++ b/THANKS
@@ -114,6 +114,7 @@ Harlan Stenn                address@hidden
 He Li                  address@hidden
 Henrik Frystyk Nielsen address@hidden
 Ian Lance Taylor       address@hidden
+Илья Н. Голубев            address@hidden
 Imacat                 address@hidden
 Inoue                  address@hidden
 James Amundson         address@hidden
diff --git a/aclocal.m4 b/aclocal.m4
index 4b6da51..9ea2936 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -13,8 +13,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.61],,
-[m4_warning([this file was generated for autoconf 2.61.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.62],,
+[m4_warning([this file was generated for autoconf 2.62.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 
`autoreconf'.])])
diff --git a/configure b/configure
index 46c9c19..3e51620 100755
--- a/configure
+++ b/configure
@@ -1,11 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for GNU Automake 1.10.1a.
+# Generated by GNU Autoconf 2.62 for GNU Automake 1.10.1a.
 #
 # Report bugs to <address@hidden>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -39,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; 
then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
   else
-    PATH_SEPARATOR=:
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+       expr "X$arg" : "X\\(.*\\)$as_nl";
+       arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
-  rm -f conf$$.sh
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -65,8 +93,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""       $as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -89,7 +115,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file 
name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file 
name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -102,17 +128,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -134,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
         X"$0" : 'X\(//\)$' \| \
         X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
            s//\1/
            q
@@ -160,7 +179,7 @@ else
   as_have_required=no
 fi
 
-  if test $as_have_required = yes &&    (eval ":
+  if test $as_have_required = yes &&    (eval ":
 (as_func_return () {
   (exit \$1)
 }
@@ -242,7 +261,7 @@ IFS=$as_save_IFS
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -263,7 +282,7 @@ _ASEOF
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -343,10 +362,10 @@ fi
 
       if test "x$CONFIG_SHELL" != x; then
   for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+       do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+       done
+       export CONFIG_SHELL
+       exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
 
@@ -415,9 +434,10 @@ fi
 
 test \$exitcode = 0") || {
   echo No shell found that supports shell functions.
-  echo Please tell address@hidden about your system,
-  echo including any error possibly output before this
-  echo message
+  echo Please tell address@hidden about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
 }
 
 
@@ -453,7 +473,7 @@ test \$exitcode = 0") || {
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX 
shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX 
shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -481,7 +501,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -494,19 +513,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -531,10 +553,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+       test -d "$1/.";
       else
        case $1 in
-        -*)set "./$1";;
+       -*)set "./$1";;
        esac;
        case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
        ???[sx]*):;;*)false;;esac;fi
@@ -636,6 +658,7 @@ MAKEINFO
 install_sh
 STRIP
 INSTALL_STRIP_PROGRAM
+MKDIR_P
 mkdir_p
 AWK
 SET_MAKE
@@ -655,6 +678,9 @@ FGREP
 LIBOBJS
 LTLIBOBJS'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+'
       ac_precious_vars='build_alias
 host_alias
 target_alias'
@@ -663,6 +689,8 @@ target_alias'
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -761,13 +789,21 @@ do
     datarootdir=$ac_optarg ;;
 
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) 
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+        ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
 
   -docdir | --docdir | --docdi | --doc | --do)
     ac_prev=docdir ;;
@@ -780,13 +816,21 @@ do
     dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) 
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+        ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -977,22 +1021,38 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) 
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+        ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) 
ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+        ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -1012,7 +1072,7 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; }
     ;;
@@ -1021,16 +1081,16 @@ Try \`$0 --help' for more information." >&2
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} 
${target_alias=$ac_option}
     ;;
 
@@ -1039,22 +1099,38 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: Unrecognized options: 
$ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: Unrecognized options: 
$ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
 for ac_var in  exec_prefix prefix bindir sbindir libexecdir datarootdir \
                datadir sysconfdir sharedstatedir localstatedir includedir \
                oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
                libdir localedir mandir
 do
   eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: 
$ac_val" >&2
+  { $as_echo "$as_me: error: expected an absolute directory name for 
--$ac_var: $ac_val" >&2
    { (exit 1); exit 1; }; }
 done
 
@@ -1069,7 +1145,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use 
--host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't 
use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -1085,10 +1161,10 @@ test "$silent" = yes && exec 6>/dev/null
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
+  { $as_echo "$as_me: error: Working directory cannot be determined" >&2
    { (exit 1); exit 1; }; }
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
    { (exit 1); exit 1; }; }
 
 
@@ -1096,12 +1172,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
   # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$0" : 'X\(//\)[^/]' \| \
-        X"$0" : 'X\(//\)$' \| \
-        X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+        X"$as_myself" : 'X\(//\)[^/]' \| \
+        X"$as_myself" : 'X\(//\)$' \| \
+        X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
            s//\1/
            q
@@ -1128,12 +1204,12 @@ else
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" 
>&2
    { (exit 1); exit 1; }; }
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-       cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: 
$ac_msg" >&2
+       cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: 
error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
        pwd)`
 # When building in place, set srcdir=.
@@ -1182,9 +1258,9 @@ Configuration:
 
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-                         [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                         [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -1194,25 +1270,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/automake]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/automake]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1241,15 +1317,17 @@ fi
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 
's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1285,7 +1363,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
       echo &&
       $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" 
>&2
     fi || ac_status=$?
     cd "$ac_pwd" || { ac_status=$?; break; }
   done
@@ -1295,10 +1373,10 @@ test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 GNU Automake configure 1.10.1a
-generated by GNU Autoconf 2.61
+generated by GNU Autoconf 2.62
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1309,7 +1387,7 @@ This file contains any messages produced by compilers 
while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by GNU Automake $as_me 1.10.1a, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+generated by GNU Autoconf 2.62.  Invocation command line was
 
   $ $0 $@
 
@@ -1345,7 +1423,7 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
+  $as_echo "PATH: $as_dir"
 done
 IFS=$as_save_IFS
 
@@ -1380,7 +1458,7 @@ do
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
     *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
     1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
@@ -1432,11 +1510,12 @@ _ASBOX
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains 
a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var 
contains a newline." >&5
+$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -1466,9 +1545,9 @@ _ASBOX
     do
       eval ac_val=\$$ac_var
       case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed 
"s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
       esac
-      echo "$ac_var='\''$ac_val'\''"
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
@@ -1483,9 +1562,9 @@ _ASBOX
       do
        eval ac_val=\$$ac_var
        case $ac_val in
-       *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+       *\'\''*) ac_val=`$as_echo "$ac_val" | sed 
"s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
        esac
-       echo "$ac_var='\''$ac_val'\''"
+       $as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1501,8 +1580,8 @@ _ASBOX
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
   rm -f core *.core core.conftest.* &&
     rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
@@ -1544,21 +1623,24 @@ _ACEOF
 
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
+  ac_site_file1=$CONFIG_SITE
 elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
 else
-  set x "$ac_default_prefix/share/config.site" \
-       "$ac_default_prefix/etc/config.site"
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-shift
-for ac_site_file
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1568,16 +1650,16 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
       [\\/]* | ?:[\\/]* ) . "$cache_file";;
       *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
@@ -1591,29 +1673,38 @@ for ac_var in $ac_precious_vars; do
   eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in 
the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" 
>&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' 
in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous 
run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous 
run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the 
previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-       { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the 
previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-       { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-       { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-       ac_cache_corrupted=:
+       # differences in whitespace do not lead to failure.
+       ac_old_val_w=`echo x $ac_old_val`
+       ac_new_val_w=`echo x $ac_new_val`
+       if test "$ac_old_val_w" != "$ac_new_val_w"; then
+         { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the 
previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+         ac_cache_corrupted=:
+       else
+         { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in 
\`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the 
previous run:" >&2;}
+         eval $ac_var=\$ac_old_val
+       fi
+       { $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+       { $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1623,10 +1714,10 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the 
build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm 
$cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start 
over" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise 
the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" 
>&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm 
$cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and 
start over" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1680,8 +1771,8 @@ for ac_dir in lib "$srcdir"/lib; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in lib 
\"$srcdir\"/lib" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in lib 
\"$srcdir\"/lib" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in 
lib \"$srcdir\"/lib" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in lib 
\"$srcdir\"/lib" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1697,34 +1788,34 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please 
don't use this var.
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" 
>&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL 
$ac_aux_dir/config.sub" >&5
+$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
    { (exit 1); exit 1; }; }
 
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
 if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify 
one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must 
specify one" >&5
+$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub 
$ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" 
>&2;}
+  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub 
$ac_build_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" 
>&2;}
    { (exit 1); exit 1; }; }
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+$as_echo "$as_me: error: invalid value of canonical build" >&2;}
    { (exit 1); exit 1; }; };;
 esac
 build=$ac_cv_build
@@ -1763,11 +1854,12 @@ am__api_version='1.10'
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
@@ -1796,17 +1888,29 @@ case $as_dir/ in
            # program-specific install script used by HP pwplus--don't use.
            :
          else
-           ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-           break 3
+           rm -rf conftest.one conftest.two conftest.dir
+           echo one > conftest.one
+           echo two > conftest.two
+           mkdir conftest.dir
+           if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two 
"`pwd`/conftest.dir" &&
+             test -s conftest.one && test -s conftest.two &&
+             test -s conftest.dir/conftest.one &&
+             test -s conftest.dir/conftest.two
+           then
+             ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+             break 3
+           fi
          fi
        fi
       done
     done
     ;;
 esac
+
 done
 IFS=$as_save_IFS
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -1819,8 +1923,8 @@ fi
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1830,8 +1934,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -1854,9 +1958,9 @@ if (
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there 
is not a broken
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure 
there is not a broken
 alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a 
broken
 alias in your environment" >&2;}
    { (exit 1); exit 1; }; }
    fi
@@ -1867,26 +1971,23 @@ then
    # Ok.
    :
 else
-   { { echo "$as_me:$LINENO: error: newly created file is older than 
distributed files!
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than 
distributed files!
 Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
+$as_echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1897,15 +1998,15 @@ if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or 
missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
-{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
   if test "${ac_cv_path_mkdir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
@@ -1940,8 +2041,8 @@ fi
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
-{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-echo "${ECHO_T}$MKDIR_P" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
 case $mkdir_p in
@@ -1953,10 +2054,10 @@ for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with 
args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
   ac_cv_prog_AWK="$AWK" # Let the user override the test.
@@ -1969,7 +2070,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x 
"$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -1980,22 +2081,23 @@ fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
   test -n "$AWK" && break
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
 if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = 
set"; }; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
 SHELL = /bin/sh
@@ -2012,12 +2114,12 @@ esac
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -2036,8 +2138,8 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { echo "$as_me:$LINENO: error: source directory already configured; run 
\"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make 
distclean\" there first" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; 
run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make 
distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
   fi
 fi
@@ -2092,10 +2194,10 @@ if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program 
name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
@@ -2108,7 +2210,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x 
"$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2119,11 +2221,11 @@ fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2132,10 +2234,10 @@ if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
   ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
@@ -2148,7 +2250,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x 
"$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2159,11 +2261,11 @@ fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
   if test "x$ac_ct_STRIP" = x; then
@@ -2171,10 +2273,10 @@ fi
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect 
cross-tools
+{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect 
cross-tools
 whose name does not start with the host triplet.  If you think this
 configuration is useful to you, please write to address@hidden" >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
 whose name does not start with the host triplet.  If you think this
 configuration is useful to you, please write to address@hidden" >&2;}
 ac_tool_warned=yes ;;
@@ -2222,10 +2324,10 @@ AUTOMAKE="perllibdir=`pwd`\"/lib$PATH_SEPARATOR./lib\" 
`pwd`/automake --libdir=l
 
 # Extract the first word of "perl", so it can be a program name with args.
 set dummy perl; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_path_PERL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   case $PERL in
   [\\/]* | ?:[\\/]*)
@@ -2240,7 +2342,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x 
"$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2252,25 +2354,25 @@ esac
 fi
 PERL=$ac_cv_path_PERL
 if test -n "$PERL"; then
-  { echo "$as_me:$LINENO: result: $PERL" >&5
-echo "${ECHO_T}$PERL" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $PERL" >&5
+$as_echo "$PERL" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
 if test -z "$PERL"; then
-   { { echo "$as_me:$LINENO: error: perl not found" >&5
-echo "$as_me: error: perl not found" >&2;}
+   { { $as_echo "$as_me:$LINENO: error: perl not found" >&5
+$as_echo "$as_me: error: perl not found" >&2;}
    { (exit 1); exit 1; }; }
 fi
 $PERL -e 'require 5.006;' || {
-   { { echo "$as_me:$LINENO: error: perl 5.6 or better is required; perl 5.8.2 
or better
+   { { $as_echo "$as_me:$LINENO: error: perl 5.6 or better is required; perl 
5.8.2 or better
 is recommended.  If you have several perl versions
 installed, select the one Automake should use using
   ./configure PERL=/path/to/perl" >&5
-echo "$as_me: error: perl 5.6 or better is required; perl 5.8.2 or better
+$as_echo "$as_me: error: perl 5.6 or better is required; perl 5.8.2 or better
 is recommended.  If you have several perl versions
 installed, select the one Automake should use using
   ./configure PERL=/path/to/perl" >&2;}
@@ -2280,10 +2382,10 @@ installed, select the one Automake should use using
 # The test suite will skip some tests if tex is absent.
 # Extract the first word of "tex", so it can be a program name with args.
 set dummy tex; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
 if test "${ac_cv_prog_TEX+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$TEX"; then
   ac_cv_prog_TEX="$TEX" # Let the user override the test.
@@ -2296,7 +2398,7 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x 
"$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_TEX="tex"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
@@ -2307,11 +2409,11 @@ fi
 fi
 TEX=$ac_cv_prog_TEX
 if test -n "$TEX"; then
-  { echo "$as_me:$LINENO: result: $TEX" >&5
-echo "${ECHO_T}$TEX" >&6; }
+  { $as_echo "$as_me:$LINENO: result: $TEX" >&5
+$as_echo "$TEX" >&6; }
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
@@ -2322,10 +2424,10 @@ fi
 # following tests, but some users were unable to figure out that their
 # installation was broken since --version appeared to work.
 
-{ echo "$as_me:$LINENO: checking whether autoconf is installed" >&5
-echo $ECHO_N "checking whether autoconf is installed... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether autoconf is installed" >&5
+$as_echo_n "checking whether autoconf is installed... " >&6; }
 if test "${am_cv_autoconf_installed+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if { echo "$as_me:$LINENO: eval $am_AUTOCONF --version" >&5
    (eval $am_AUTOCONF --version) >&5 2>&5
@@ -2338,20 +2440,20 @@ else
   am_cv_autoconf_installed=no
 fi
 fi
-{ echo "$as_me:$LINENO: result: $am_cv_autoconf_installed" >&5
-echo "${ECHO_T}$am_cv_autoconf_installed" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_installed" >&5
+$as_echo "$am_cv_autoconf_installed" >&6; }
 if test "$am_cv_autoconf_installed" = no; then
-  { { echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required.
+  { { $as_echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required.
     Please make sure it is installed and in your PATH." >&5
-echo "$as_me: error: Autoconf 2.60 or better is required.
+$as_echo "$as_me: error: Autoconf 2.60 or better is required.
     Please make sure it is installed and in your PATH." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
-{ echo "$as_me:$LINENO: checking whether autoconf works" >&5
-echo $ECHO_N "checking whether autoconf works... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether autoconf works" >&5
+$as_echo_n "checking whether autoconf works... " >&6; }
 if test "${am_cv_autoconf_works+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   mkdir conftest
 echo 'AC''_INIT' > conftest/conftest.ac
@@ -2367,20 +2469,20 @@ else
 fi
 rm -rf conftest
 fi
-{ echo "$as_me:$LINENO: result: $am_cv_autoconf_works" >&5
-echo "${ECHO_T}$am_cv_autoconf_works" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_works" >&5
+$as_echo "$am_cv_autoconf_works" >&6; }
 if test "$am_cv_autoconf_works" = no; then
-  { { echo "$as_me:$LINENO: error: The installed version of autoconf does not 
work.
+  { { $as_echo "$as_me:$LINENO: error: The installed version of autoconf does 
not work.
     Please check config.log for error messages before this one." >&5
-echo "$as_me: error: The installed version of autoconf does not work.
+$as_echo "$as_me: error: The installed version of autoconf does not work.
     Please check config.log for error messages before this one." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
-{ echo "$as_me:$LINENO: checking whether autoconf is recent enough" >&5
-echo $ECHO_N "checking whether autoconf is recent enough... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether autoconf is recent enough" >&5
+$as_echo_n "checking whether autoconf is recent enough... " >&6; }
 if test "${am_cv_autoconf_version+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   mkdir conftest
 echo 'AC''_PREREQ(2.60)' > conftest/conftest.ac
@@ -2396,19 +2498,19 @@ else
 fi
 rm -rf conftest
 fi
-{ echo "$as_me:$LINENO: result: $am_cv_autoconf_version" >&5
-echo "${ECHO_T}$am_cv_autoconf_version" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_version" >&5
+$as_echo "$am_cv_autoconf_version" >&6; }
 if test "$am_cv_autoconf_version" = no; then
-  { { echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required." >&5
-echo "$as_me: error: Autoconf 2.60 or better is required." >&2;}
+  { { $as_echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required." 
>&5
+$as_echo "$as_me: error: Autoconf 2.60 or better is required." >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 # Test for ln.  We need use it to install the versioned binaries.
-{ echo "$as_me:$LINENO: checking whether ln works" >&5
-echo $ECHO_N "checking whether ln works... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking whether ln works" >&5
+$as_echo_n "checking whether ln works... " >&6; }
 if test "${am_cv_prog_ln+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
 
 rm -f conftest conftest.file
@@ -2425,8 +2527,8 @@ LN=$am_cv_prog_ln
 
 result=no
 test "x$am_cv_prog_ln" = xln && result=yes
-{ echo "$as_me:$LINENO: result: $result" >&5
-echo "${ECHO_T}$result" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $result" >&5
+$as_echo "$result" >&6; }
 
 # The amount we should wait after modifying files depends on the platform.
 # On Windows '95, '98 and ME, files modifications have 2-seconds
@@ -2440,42 +2542,37 @@ esac
 
 
 # Test for things needed by the test suite.
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" 
>&6; }
+{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" 
>&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
 if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
+  if test -z "$GREP"; then
   ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in grep ggrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-    # Check for GNU ac_path_GREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'GREP' >> "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" 
>"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -2490,74 +2587,60 @@ case `"$ac_path_GREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_GREP_found && break 3
+      $ac_path_GREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found 
in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+  if test -z "$ac_cv_path_GREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable grep could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
-fi
-
+  fi
 else
   ac_cv_path_GREP=$GREP
 fi
 
-
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
  GREP="$ac_cv_path_GREP"
 
 
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
 if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
    then ac_cv_path_EGREP="$GREP -E"
    else
-     # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
+     if test -z "$EGREP"; then
   ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in egrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-    # Check for GNU ac_path_EGREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'EGREP' >> "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || 
break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -2572,75 +2655,61 @@ case `"$ac_path_EGREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_EGREP_found && break 3
+      $ac_path_EGREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found 
in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+  if test -z "$ac_cv_path_EGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable egrep could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
-fi
-
+  fi
 else
   ac_cv_path_EGREP=$EGREP
 fi
 
-
    fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
  EGREP="$ac_cv_path_EGREP"
 
 
-{ echo "$as_me:$LINENO: checking for fgrep" >&5
-echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; }
+{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
 if test "${ac_cv_path_FGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  $as_echo_n "(cached) " >&6
 else
   if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
    then ac_cv_path_FGREP="$GREP -F"
    else
-     # Extract the first word of "fgrep" to use in msg output
-if test -z "$FGREP"; then
-set dummy fgrep; ac_prog_name=$2
-if test "${ac_cv_path_FGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
+     if test -z "$FGREP"; then
   ac_path_FGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_prog in fgrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
-    # Check for GNU ac_path_FGREP and select it if it is found.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
   # Check for GNU $ac_path_FGREP
 case `"$ac_path_FGREP" --version 2>&1` in
 *GNU*)
   ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
 *)
   ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  $as_echo_n 0123456789 >"conftest.in"
   while :
   do
     cat "conftest.in" "conftest.in" >"conftest.tmp"
     mv "conftest.tmp" "conftest.in"
     cp "conftest.in" "conftest.nl"
-    echo 'FGREP' >> "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
     "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
@@ -2655,33 +2724,24 @@ case `"$ac_path_FGREP" --version 2>&1` in
   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-
-    $ac_path_FGREP_found && break 3
+      $ac_path_FGREP_found && break 3
+    done
   done
 done
-
-done
 IFS=$as_save_IFS
-
-
-fi
-
-FGREP="$ac_cv_path_FGREP"
-if test -z "$FGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found 
in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+  if test -z "$ac_cv_path_FGREP"; then
+    { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+$as_echo "$as_me: error: no acceptable fgrep could be found in 
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
-fi
-
+  fi
 else
   ac_cv_path_FGREP=$FGREP
 fi
 
-
    fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
-echo "${ECHO_T}$ac_cv_path_FGREP" >&6; }
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
  FGREP="$ac_cv_path_FGREP"
 
 
@@ -2720,11 +2780,12 @@ _ACEOF
     case $ac_val in #(
     *${as_nl}*)
       case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains 
a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var 
contains a newline." >&5
+$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
       esac
       case $ac_var in #(
       _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
       *) $as_unset $ac_var ;;
       esac ;;
     esac
@@ -2757,12 +2818,12 @@ echo "$as_me: WARNING: Cache variable $ac_var contains 
a newline." >&2;} ;;
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
     test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -2779,6 +2840,12 @@ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 # take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
 ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
 t clear
 :clear
 s/^[    ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   
]*\(.*\)/-D\1=\2/g
@@ -2808,7 +2875,7 @@ ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
   # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
   #    will be set to the directory where LIBOBJS objects are built.
   ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
@@ -2821,11 +2888,12 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -2838,7 +2906,7 @@ ac_cs_silent=false
 SHELL=\${CONFIG_SHELL-$SHELL}
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
@@ -2848,7 +2916,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
@@ -2870,17 +2938,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; 
then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
   else
-    PATH_SEPARATOR=:
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+       expr "X$arg" : "X\\(.*\\)$as_nl";
+       arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
-  rm -f conf$$.sh
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 # Support unset when possible.
@@ -2896,8 +2992,6 @@ fi
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
-as_nl='
-'
 IFS=" ""       $as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
@@ -2920,7 +3014,7 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file 
name" >&2
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file 
name" >&2
   { (exit 1); exit 1; }
 fi
 
@@ -2933,17 +3027,10 @@ PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
 # Required to use basename.
 if expr a : '\(a\)' >/dev/null 2>&1 &&
@@ -2965,7 +3052,7 @@ as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
         X"$0" : 'X\(//\)$' \| \
         X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
            s//\1/
            q
@@ -3016,7 +3103,7 @@ $as_unset CDPATH
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX 
shell" >&2
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX 
shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
@@ -3044,7 +3131,6 @@ case `echo -n x` in
 *)
   ECHO_N='-n';;
 esac
-
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
@@ -3057,19 +3143,22 @@ if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
     as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
+  fi
 else
   as_ln_s='cp -p'
 fi
@@ -3094,10 +3183,10 @@ else
   as_test_x='
     eval sh -c '\''
       if test -d "$1"; then
-        test -d "$1/.";
+       test -d "$1/.";
       else
        case $1 in
-        -*)set "./$1";;
+       -*)set "./$1";;
        esac;
        case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
        ???[sx]*):;;*)false;;esac;fi
@@ -3120,7 +3209,7 @@ exec 6>&1
 # values after options handling.
 ac_log="
 This file was extended by GNU Automake $as_me 1.10.1a, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+generated by GNU Autoconf 2.62.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -3133,13 +3222,13 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
@@ -3152,7 +3241,7 @@ Usage: $0 [OPTIONS] [FILE]...
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
   --file=FILE[:TEMPLATE]
-                  instantiate the configuration file FILE
+                   instantiate the configuration file FILE
 
 Configuration files:
 $config_files
@@ -3160,13 +3249,13 @@ $config_files
 Report bugs to <address@hidden>."
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
 GNU Automake config.status 1.10.1a
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; 
s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.62,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; 
s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -3174,11 +3263,12 @@ ac_pwd='$ac_pwd'
 srcdir='$srcdir'
 INSTALL='$INSTALL'
 MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
@@ -3200,21 +3290,24 @@ do
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
+    $as_echo "$ac_cs_version"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h |  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
 Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
@@ -3233,27 +3326,29 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args 
\$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create 
--no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
   export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create 
--no-recursion
+  exec "\$@"
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 exec 5>>config.log
 {
   echo
   sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 ## Running $as_me. ##
 _ASBOX
-  echo "$ac_log"
+  $as_echo "$ac_log"
 } >&5
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #
 # INIT-COMMANDS
 #
@@ -3261,7 +3356,7 @@ APIVERSION=$APIVERSION
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
 # Handling of arguments.
 for ac_config_target in $ac_config_targets
@@ -3279,8 +3374,8 @@ do
     "tests/aclocal-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES 
tests/aclocal-${APIVERSION}:tests/aclocal.in" ;;
     "tests/automake-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES 
tests/automake-${APIVERSION}:tests/automake.in" ;;
 
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" 
>&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
@@ -3319,140 +3414,143 @@ $debug ||
   (umask 077 && mkdir "$tmp")
 } ||
 {
-   echo "$me: cannot create a temporary directory in ." >&2
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
-_ACEOF
 
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
 
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
 
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-am_AUTOCONF!$am_AUTOCONF$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-am__isrc!$am__isrc$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-APIVERSION!$APIVERSION$ac_delim
-pkgvdatadir!$pkgvdatadir$ac_delim
-PERL!$PERL$ac_delim
-TEX!$TEX$ac_delim
-LN!$LN$ac_delim
-MODIFICATION_DELAY!$MODIFICATION_DELAY$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-FGREP!$FGREP$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 75; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = 
$ac_delim_num; then
     break
   elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
    { (exit 1); exit 1; }; }
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
 done
+rm -f conf$$subs.sh
 
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files 
machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
 _ACEOF
 
-
 # VPATH may cause trouble with some makes, so we remove $(srcdir),
 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
@@ -3468,19 +3566,21 @@ s/^[^=]*=[       ]*$//
 }'
 fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"
 
 
-for ac_tag in  :F $CONFIG_FILES
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
 do
   case $ac_tag in
   :[FHLC]) ac_mode=$ac_tag; continue;;
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;}
    { (exit 1); exit 1; }; };;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
@@ -3509,26 +3609,38 @@ echo "$as_me: error: Invalid tag $ac_tag." >&2;}
           [\\/$]*) false;;
           *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
           esac ||
-          { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+          { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" 
>&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
    { (exit 1); exit 1; }; };;
       esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; 
esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-         echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    configure_input='Generated from '`
+         $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+       `' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
     esac
     ;;
   esac
@@ -3538,7 +3650,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
         X"$ac_file" : 'X\(//\)[^/]' \| \
         X"$ac_file" : 'X\(//\)$' \| \
         X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
+$as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
            s//\1/
            q
@@ -3564,7 +3676,7 @@ echo X"$ac_file" |
     as_dirs=
     while :; do
       case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
@@ -3573,7 +3685,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
         X"$as_dir" : 'X\(//\)[^/]' \| \
         X"$as_dir" : 'X\(//\)$' \| \
         X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
            s//\1/
            q
@@ -3594,17 +3706,17 @@ echo X"$as_dir" |
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create 
directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create 
directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
   ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 
's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -3649,12 +3761,13 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
   esac
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
   p
   q
 }
@@ -3663,13 +3776,14 @@ case `sed -n '/datarootdir/ {
 /@infodir@/p
 /@localedir@/p
 /@mandir@/p
-' $ac_file_inputs` in
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 
address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the 
--datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir 
setting" >&2;}
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the 
--datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir 
setting" >&2;}
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
   ac_datarootdir_hack='
   s&@datadir@&$datadir&g
   s&@docdir@&$docdir&g
@@ -3683,15 +3797,16 @@ _ACEOF
 # Neutralize VPATH when `$srcdir' = `.'.
 # Shell code in configure.ac might set extrasub.
 # FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
 s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -3702,21 +3817,28 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" 
>$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[         ]*datarootdir[  ]*:*=/p' "$tmp/out"`; test -z 
"$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the 
variable \`datarootdir'
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the 
variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable 
\`datarootdir'
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable 
\`datarootdir'
 which seems to be undefined.  Please make sure it is defined." >&2;}
 
   rm -f "$tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
  ;;
 
 
@@ -3737,6 +3859,11 @@ _ACEOF
 chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" 
>&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -3758,4 +3885,8 @@ if test "$no_create" != yes; then
   # would make configure fail if this is the last instruction.
   $ac_cs_success || { (exit 1); exit 1; }
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; 
then
+  { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: 
$ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
 
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 34340a7..79a8b67 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -158,6 +158,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 info_TEXINFOS = automake.texi
@@ -196,8 +197,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/lib/Automake/Makefile.in b/lib/Automake/Makefile.in
index 92de495..d6bf776 100644
--- a/lib/Automake/Makefile.in
+++ b/lib/Automake/Makefile.in
@@ -154,6 +154,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 SUBDIRS = tests
@@ -200,8 +201,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/lib/Automake/tests/Makefile.in b/lib/Automake/tests/Makefile.in
index 5694356..7bea62c 100644
--- a/lib/Automake/tests/Makefile.in
+++ b/lib/Automake/tests/Makefile.in
@@ -130,6 +130,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 TESTS_ENVIRONMENT = $(PERL) -Mstrict -I $(top_srcdir)/lib -w
@@ -147,8 +148,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/lib/Makefile.in b/lib/Makefile.in
index d50ab43..3b466f7 100644
--- a/lib/Makefile.in
+++ b/lib/Makefile.in
@@ -157,6 +157,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 SUBDIRS = Automake am
@@ -176,8 +177,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/lib/am/Makefile.in b/lib/am/Makefile.in
index 4976af9..00301e6 100644
--- a/lib/am/Makefile.in
+++ b/lib/am/Makefile.in
@@ -141,6 +141,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 amdir = $(pkgvdatadir)/am
@@ -192,8 +193,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/lib/am/configure.am b/lib/am/configure.am
index 6c55d39..53a2d57 100644
--- a/lib/am/configure.am
+++ b/lib/am/configure.am
@@ -1,5 +1,6 @@
 ## automake - create Makefile.in from Makefile.am
-## Copyright (C) 2001, 2002, 2003, 2004, 2006  Free Software Foundation, Inc.
+## Copyright (C) 2001, 2002, 2003, 2004, 2006, 2008  Free Software
+## Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -42,8 +43,13 @@ endif %?TOPDIR_P%
            *$$dep*) \
 ?TOPDIR_P?           echo ' cd $(srcdir) && $(AUTOMAKE) --%STRICTNESS% 
%USE-DEPS%'; \
 ?TOPDIR_P?           cd $(srcdir) && $(AUTOMAKE) --%STRICTNESS% %USE-DEPS% \
-?!TOPDIR_P?          cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 
\
-               && exit 0; \
+?TOPDIR_P?             && exit 0; \
+?!TOPDIR_P?          ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) 
am--refresh ) \
+## If on the other hand, subdir/Makefile.in has been removed, then toplevel
+## am--refresh will not be aware of any need to run.  We still invoke it
+## due to $? listing all prerequisites.  Fix up for it by running the rebuild
+## rule for this file only, below.
+?!TOPDIR_P?            && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/m4/Makefile.in b/m4/Makefile.in
index fd1f551..635c30b 100644
--- a/m4/Makefile.in
+++ b/m4/Makefile.in
@@ -141,6 +141,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 m4datadir = $(datadir)/aclocal-$(APIVERSION)
@@ -188,8 +189,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/tests/Makefile.am b/tests/Makefile.am
index a2fd0dd..5227060 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -477,6 +477,8 @@ remake2.test \
 remake3.test \
 remake4.test \
 remake5.test \
+remake6.test \
+remake7.test \
 regex.test \
 req.test \
 reqd.test \
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 01e42df..a761e66 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -131,6 +131,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 XFAIL_TESTS = auxdir2.test cond17.test txinfo5.test
@@ -609,6 +610,8 @@ remake2.test \
 remake3.test \
 remake4.test \
 remake5.test \
+remake6.test \
+remake7.test \
 regex.test \
 req.test \
 reqd.test \
@@ -764,8 +767,8 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  
$(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-               && exit 0; \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
diff --git a/tests/missing6.test b/tests/remake6.test
similarity index 50%
copy from tests/missing6.test
copy to tests/remake6.test
index f65e2ab..b94dda3 100755
--- a/tests/missing6.test
+++ b/tests/remake6.test
@@ -14,38 +14,51 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Make sure autoconf version checks in aclocal.m4 are robust.
+# Make sure remaking rules work when subdir Makefile.in has been removed.
 
 . ./defs || exit 1
-
 set -e
 
-{
-  echo 'm4_define([AC_AUTOCONF_VERSION], [9999a])'
-  echo 'm4_define([b], [oops])'
-  cat configure.in
-  echo AC_OUTPUT
-} >configure.ac
-rm -f configure.in
+cat > configure.in << 'END'
+AC_INIT
+AM_INIT_AUTOMAKE(nonesuch, nonesuch)
+AC_OUTPUT(Makefile sub/Makefile)
+END
 
-touch Makefile.am
+cat > Makefile.am <<'END'
+SUBDIRS = sub
+END
+mkdir sub
+: > sub/Makefile.am
 
 $ACLOCAL
-$AUTOCONF 2>stderr
-grep 'You have another version of autoconf' stderr
-grep 'aclocal.m4:.*this file was generated for' stderr
 $AUTOMAKE
+$AUTOCONF
 ./configure
 $MAKE
 
-sed 's/\[b\]/[a]/' < configure.ac > configure.tmp
-cmp configure.ac configure.tmp && exit 1
+# Now, we are set up.  Ensure that, for either missing Makefile.in,
+# or updated Makefile.am, rebuild rules are run, and run exactly once
+# only.
+
+rm -f Makefile.in
+$MAKE >stdout
+cat stdout
+test `grep -c " --run " stdout` -eq 1
 
-mv configure.tmp configure.ac
+rm -f sub/Makefile.in
+$MAKE >stdout
+cat stdout
+test `grep -c " --run " stdout` -eq 1
 
-$MAKE 2>stderr
-cat stderr
-grep 'You have another version of autoconf' stderr
-grep 'aclocal.m4:.*this file was generated for autoconf 9999a' stderr
+$sleep  # Let touched files appear newer.
+
+touch Makefile.am
+$MAKE >stdout
+cat stdout
+test `grep -c " --run " stdout` -eq 1
 
-:
+touch sub/Makefile.am
+$MAKE >stdout
+cat stdout
+test `grep -c " --run " stdout` -eq 1
diff --git a/tests/man3.test b/tests/remake7.test
similarity index 52%
copy from tests/man3.test
copy to tests/remake7.test
index fe9394d..7207285 100755
--- a/tests/man3.test
+++ b/tests/remake7.test
@@ -14,31 +14,57 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# PR 516: Prefer generated manpages to distributed ones.
+# Make sure remaking rules fail when they should.
 
 . ./defs || exit 1
-
 set -e
 
-cat > Makefile.am << 'END'
-dist_man_MANS = foo.1
-installcheck-local:
-       grep bar "$(mandir)/man1/foo.1"
-END
-
-cat >>configure.in <<'END'
-: ${foo=foo}
-AC_SUBST([foo])
-AC_CONFIG_FILES([foo.1])
-AC_OUTPUT
+cat > configure.in << 'END'
+AC_INIT
+AM_INIT_AUTOMAKE(nonesuch, nonesuch)
+AC_OUTPUT(Makefile sub/Makefile)
 END
 
-cat > foo.1.in <<'END'
address@hidden@
+cat > Makefile.am <<'END'
+SUBDIRS = sub
 END
+mkdir sub
+: > sub/Makefile.am
 
 $ACLOCAL
 $AUTOMAKE
 $AUTOCONF
 ./configure
-DISTCHECK_CONFIGURE_FLAGS=foo=bar $MAKE -e distcheck
+$MAKE
+
+$sleep
+
+# Fail for broken input files.
+
+echo "if FOO" > sub/Makefile.am
+$MAKE && exit 1
+
+: >sub/Makefile.am
+$MAKE
+
+mv Makefile.am backup
+echo "if FOO" > Makefile.am
+$MAKE && exit 1
+
+# Fail for missing input files, with or without missing
+# Makefile.in files.
+
+cp backup Makefile.am
+mv sub/Makefile.am sub/backup
+$MAKE && exit 1
+
+rm -f sub/Makefile.in
+$MAKE && exit 1
+
+mv sub/backup sub/Makefile.am
+rm -f Makefile.am
+$MAKE && exit 1
+
+rm -f Makefile.in
+$MAKE && exit 1
+:


hooks/post-receive
--
GNU Automake




reply via email to

[Prev in Thread] Current Thread [Next in Thread]