uname -a :
Linux brahma 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686 Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz GenuineIntel GNU/Linux
compiled avrdude-5.11.tar.gz ( and also tried avrdude-5.11.tar.gz) using SlackBuild: avrdude.tar.gz
Trying to use avrdude with a AVR910 device:
avrdude -p m8 -c avr910 -P /dev/ttyACM0 -v -t
and got:
---------------------------------------------------------------------------------------
vrdude: Version 5.11, compiled on May 15 2013 at 06:32:00
Copyright (c) 2000-2005 Brian Dean,
http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/hbd/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyACM0
Using Programmer : avr910
avr910_devcode (avrdude.conf) : 0x76
AVR Part : ATMEGA8
Chip Erase delay : 10000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 4 20 128 0 no 512 4 0 9000 9000 0xff 0xff
flash 33 10 64 0 yes 8192 64 128 4500 4500 0xff 0x00
lfuse 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00
lock 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00
calibration 0 0 0 0 no 4 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : avr910
Description : Atmel Low Cost Serial Programmer
avrdude: ser_send(): write error: Invalid argument
----------------------------------------------------------------------------------------------------------------------
Request help.