[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #18727] Writing flash failed
From: |
anonymous |
Subject: |
[avrdude-dev] [bug #18727] Writing flash failed |
Date: |
Mon, 08 Jan 2007 20:35:46 +0000 |
User-agent: |
Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1 |
URL:
<http://savannah.nongnu.org/bugs/?18727>
Summary: Writing flash failed
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: Montag 08.01.2007 um 20:35 UTC
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: ThoMo
Originator Email: address@hidden
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
I try to programm an ATMEGA8 using avrdude 5.3.1 with an serial programmer
(butterfly). This failed (see below).
Try the same with avrdude 5.1 was successful.
address@hidden fnordlicht-ng-0.1]# more log.txt
avrdude: Version 5.3.1, compiled on Jan 5 2007 at 21:16:55
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "/usr/local/etc/avrdude.conf"
User configuration file is "/root/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : /dev/ttyS0
Using Programmer : butterfly
AVR Part : ATMEGA8
Chip Erase delay : 10000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
eeprom 4 10 128 0 no 512 0 0 9000
9000 0xff 0xff
flash 33 6 64 0 yes 8192 64 128 4500
4500 0xff 0x00
lfuse 0 0 0 0 no 1 0 0 2000
2000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 2000
2000 0x00 0x00
lock 0 0 0 0 no 1 0 0 2000
2000 0x00 0x00
calibration 0 0 0 0 no 4 0 0 0
0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
Programmer Type : avr910
Description : Atmel Butterfly Development Board
Connecting to programmer: .
Found programmer: Id = "AVRBOOT"; type = S
Software Version = 0.7; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=64 bytes.
Programmer supports the following devices:
Device code: 0x76
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9307
avrdude: safemode: lfuse reads as E0
avrdude: safemode: hfuse reads as D0
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be
performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "fnordlicht.hex"
avrdude: input file fnordlicht.hex auto detected as Intel Hex
avrdude: writing flash (3606 bytes):
Writing | avrdude: error: programmer did not respond to command: write block
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?18727>
_______________________________________________
Nachricht geschickt von/durch Savannah
http://savannah.nongnu.org/