[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] avrdude with stk500boot...
|
From: |
Neil Davey |
|
Subject: |
[avrdude-dev] avrdude with stk500boot... |
|
Date: |
Tue, 11 Sep 2007 13:56:45 +1000 |
|
User-agent: |
Thunderbird 2.0.0.6 (Windows/20070728) |
Hi one and all..
Has anyone tried to use the Peter Fleury stk500boot
(http://homepage.hispeed.ch/peterfleury/avr-software.html) bootloader
with avrdude?
The bootloader is designed to talk stk500v2 protocol. It seems to work
without an issue using avrstudio 4.13.
Trying to use avrdude 5.3.1 (the version bundled with the latest WinAVR
release) I can't even get a signature check..
The com port is a usb <-> serial bridge.
Any suggestions of where to dig?
Regards
Neil Davey
Here is some diagnostic from avrdude:
D:\temp>avrdude -c stk500v2 -P COM5 -p m324 -vvvv
avrdude: Version 5.3.1, compiled on May 15 2007 at 17:05:10
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is
"C:\WinAVR-20070525\bin\avrdude.conf"
Using Port : COM5
Using Programmer : stk500v2
avrdude: Send: . [1b] . [01] . [00] . [01] . [0e] . [01] . [14]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: stk500v2_getsync(): found AVRISP programmer
AVR Part : ATMEGA324
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
eeprom 65 10 128 0 no 1024 4 0
9000 90
00 0xff 0xff
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
flash 33 6 256 0 yes 32768 128 256
4500 45
00 0xff 0xff
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
lock 0 0 0 0 no 1 0 0
9000 90
00 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
lfuse 0 0 0 0 no 1 0 0
9000 90
00 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
hfuse 0 0 0 0 no 1 0 0
9000 90
00 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
efuse 0 0 0 0 no 1 0 0
9000 90
00 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages
MinW Max
W ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ---
-- ---------
calibration 0 0 0 0 no 1 0 0 0
0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel STK500 Version 2.x firmware
Programmer Model: AVRISP
avrdude: Send: . [1b] . [02] . [00] . [02] . [0e] . [03] . [90] . [86]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Send: . [1b] . [03] . [00] . [02] . [0e] . [03] . [91] . [86]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Send: . [1b] . [04] . [00] . [02] . [0e] . [03] . [92] . [82]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
Hardware Version: 15
Firmware Version: 2.10
avrdude: Send: . [1b] . [05] . [00] . [02] . [0e] . [03] . [94] . [85]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
Vtarget : 0.0 V
avrdude: Send: . [1b] . [06] . [00] . [02] . [0e] . [03] . [98] . [8a]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
SCK period : 0.1 us
avrdude: Send: . [1b] . [07] . [00] . [0c] . [0e] . [10] . [c8] d [64] .
[19]
[20] . [00] S [53] . [03] . [ac] S [53] . [c5] w [77] . [86]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: AVR device initialized and ready to accept instructions
Reading | | 0%
0.00savrdude:
Send: . [1b] . [08] . [00] . [08] . [0e] . [1d] . [04] . [04] . [00] 0
[30] . [0
0] . [00] . [00] 8 [38]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: stk500v2_command(): command failed
avrdude: stk500v2_cmd(): failed to send command
avrdude: Send: . [1b] . [09] . [00] . [08] . [0e] . [1d] . [04] . [04] .
[00] 0
[30] . [00] . [01] . [00] 8 [38]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: stk500v2_command(): command failed
avrdude: stk500v2_cmd(): failed to send command
Reading | ################# | 33%
0.05savrdude:
Send: . [1b] . [0a] . [00] . [08] . [0e] . [1d] . [04] . [04] . [00] 0
[30] . [
00] . [02] . [00] 8 [38]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: stk500v2_command(): command failed
avrdude: stk500v2_cmd(): failed to send command
Reading | ################################################## | 100% 0.08s
avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
Double check connections and try again, or use -F to override
this check.
avrdude: Send: . [1b] . [0b] . [00] . [03] . [0e] . [11] . [01] . [01] .
[0c]
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude: Recv:
avrdude done. Thank you.
--
--------------------------------------
Neil Davey
Griffith University
Centre for Wireless Monitoring and Applications
Griffith School of Engineering
Nathan Campus
Phone: 07-3735-7008
Fax: 07-3735-5112
School of Psychology - ACNRC
Mt Gravatt Campus
Phone: 07-3735-3395
--------------------------------------
- [avrdude-dev] avrdude with stk500boot...,
Neil Davey <=