[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #28744] Can't load bootloader to xmega128a1
From: |
Joseph Lacerte |
Subject: |
[avrdude-dev] [bug #28744] Can't load bootloader to xmega128a1 |
Date: |
Sat, 21 May 2011 21:17:07 +0000 |
User-agent: |
Mozilla/5.0 (X11; Linux i686 on x86_64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 |
Follow-up Comment #17, bug #28744 (project avrdude):
I am the lucky owner of a Rev A jtagicemkII. I was unable to program the boot
section of a xmega256a3b with the listed patches (rev3 + ..private.h mods),
using the JTAG protocol. Main flash section and fuses would program OK. With
AvrStudio5 my mkII would program the boot section of the chip, so I could not
leave it to that!
After experimentation I found that setting the offset to zero vs 0x84000 did
the trick. (only for boot section programming)
I have made a quick fix and included rev3 patch modifications plus missing
jtagmkII_private.h defs.
xmega_boot_jtag.patch to be used against avrdude-5.10
(file #23435)
_______________________________________________________
Additional Item Attachment:
File name: xmega_boot_jtag.patch Size:5 KB
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?28744>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [avrdude-dev] [bug #28744] Can't load bootloader to xmega128a1,
Joseph Lacerte <=