[avrdude-dev] programmer config for JTAGkey (FT2232)

[Turbo J]

Hi,

I just finished testing the trunk version of avrdude (r985)
with my JTAGKey2 - works well.

The following config should work for all Amontec JTAGKey variants,
JTAGKey, JTAGkey tiny (both FT2232D) and JTAGKey2 (FT2232H type):

programmer
  id    = "jtagkey";
  desc  = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2";
  type  = avrftdi;
  usbvid     = 0x0403;
# Note: This PID is used in all JTAGKey variants
  usbpid    = 0xCFF8;
  usbdev = "A";
  usbvendor  = "";
  usbproduct = "";
  usbsn      = "";
#ISP-signals => 20 - Pin connector on JTAGKey
  reset  = 4; # TMS 7 violet
  sck    = 1; # TCK 9 white
  mosi   = 2; # TDI 5 green
  miso   = 3; # TDO 13 orange
  buff   = 5;
# VTG           VREF 1 brown with red tip
# GND           GND 20 black
# The colors are on the 20 pin breakout cable
# from Amontec
;

It is more or less the same as "2232HIO" without the LEDs and with a
different PID.

Almost forgot:
Thank you for adding FT2232 support to avrdude!

-- Turbo J