[avrdude-dev] Fwd: avrdude.conf - ftdi-section

[Daniel Schulz]

I sent this to Joerg without realizing that it got not to the list,
sorry Joerg! Maybe someone else can support me with my ftdi-problem.

---------- Forwarded message ----------
From: Daniel Schulz <address@hidden>
Date: 2011/11/2
Subject: Re: [avrdude-dev] avrdude.conf - ftdi-section
To: Joerg Wunsch <address@hidden>


Hello Joerg!

First of all: thanks for your excellent work over the years!

> Nope, the LEDs would have to be attached to ADBUS[4:7] which are
> GPIOL[0:3] in MPSSE mode.

My setup:
ADBUS0 : SCK
ADBUS1 : MOSI
ADBUS2 : MISO

ADBUS4 : RESET


Is RESET correct on ADBUS4? On Jason's page it is on GPIOL0 (ADBUS4)?!
So there is one missing LED because there are only 3 other GPIOL.
But even without LEDs it does not work, because when I do

  avrdude -p m8 -P /dev/ttyUSB0 -c avrftdi

I can see in syslog that the FTDI was disconnected:
"[725766.865511] ftdi_sio ttyUSB0: FTDI USB Serial Device converter
now disconnected from ttyUSB0"

Is this a reset problem? Do I have to change anything on my ftdi-board?

Here is the log from avrdude, maybe that helps?


avrdude -p m8 -P /dev/ttyUSB1 -c avrftdi -b 19200   -U lfuse:r:-:i -vvv

avrdude: Version 5.11.1, compiled on Oct 18 2011 at 21:41:15
        Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
        Copyright (c) 2007-2009 Joerg Wunsch

        System wide configuration file is "/etc/avrdude.conf"
        User configuration file is "/home/daniel/.avrduderc"
        User configuration file does not exist or is not a regular
file, skipping

        Using Port                    : /dev/ttyUSB1
        Using Programmer              : avrftdi
        Overriding Baud Rate          : 19200
avrdude: device: 031, serial number: ? type 0x0500 found
avrdude: Using device VID:PID 0403:6010 type 0x0500(C/D) and SN '?'.
avrdude: Using USB Interface A
avrdude info: reset pin value: 3
avrdude info: direction: 0x0000, value: 0x0000, inversion: 0x0000
add_pins: 1: 0x0000, inv=0x0000
add_pins: 2: 0x0000, inv=0x0000
add_pin: 7: bit 0x0000 inv=0x0000
add_pin: 8: bit 0x0000 inv=0x0000
add_pin: 9: bit 0x0000 inv=0x0000
add_pin: 10: bit 0x0000 inv=0x0000
pin direction mask: 000b
pin value mask: 0000
avrdude info: clock divisor: 0x0137
avrdude info: Pin is zero val 0!
avrdude info: Pin is zero val 1!
        AVR Part                      : ATMEGA8
        Chip Erase delay              : 10000 us
        PAGEL                         : PD7
        BS2                           : PC2
        RESET disposition             : dedicated
        RETRY pulse                   : SCK
        serial program mode           : yes
        parallel program mode         : yes
        Timeout                       : 200
        StabDelay                     : 100
        CmdexeDelay                   : 25
        SyncLoops                     : 32
        ByteDelay                     : 0
        PollIndex                     : 3
        PollValue                     : 0x53
        Memory Detail                 :

                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          eeprom         4    20   128    0 no        512    4      0
 9000  9000 0xff 0xff
                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          flash         33    10    64    0 yes      8192   64    128
 4500  4500 0xff 0x00
                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          lfuse          0     0     0    0 no          1    0      0
 2000  2000 0x00 0x00
                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          hfuse          0     0     0    0 no          1    0      0
 2000  2000 0x00 0x00
                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          lock           0     0     0    0 no          1    0      0
 2000  2000 0x00 0x00
                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          calibration    0     0     0    0 no          4    0      0
   0     0 0x00 0x00
                                 Block Poll               Page
              Polled
          Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages
MinW  MaxW   ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
          signature      0     0     0    0 no          3    0      0
   0     0 0x00 0x00

        Programmer Type : avrftdi
        Description     : FT2232D based generic programmer

avrdude info: Pin is zero val 0!
avrdude info: Pin is zero val 0!
avrdude info: Pin is zero val 0!
avrdude info: Pin is zero val 0!
avrdude info: pin 0004 bit 0008 value 0x0000
SameVal
avrdude info: Pins is zero!
avrdude info: pin 0001 bit 0001 value 0x0000
SameVal
avrdude info: pin 0004 bit 0008 value 0x0008
avrdude info: direction: 0x000b, value: 0x0008, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0000
avrdude info: direction: 0x000b, value: 0x0000, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0008
avrdude info: direction: 0x000b, value: 0x0008, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0000
avrdude info: direction: 0x000b, value: 0x0000, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0008
avrdude info: direction: 0x000b, value: 0x0008, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0000
avrdude info: direction: 0x000b, value: 0x0000, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0008
avrdude info: direction: 0x000b, value: 0x0008, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0000
avrdude info: direction: 0x000b, value: 0x0000, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0008
avrdude info: direction: 0x000b, value: 0x0008, inversion: 0x0000
avrdude info: pin 0004 bit 0008 value 0x0000
avrdude info: direction: 0x000b, value: 0x0000, inversion: 0x0000
avrdude: initialization failed, rc=-1
        Double check connections and try again, or use -F to override
        this check.

avrdude info: Pin is zero val 0!
avrdude info: Pins is zero!
avrdude info: pin 0004 bit 0008 value 0x0008
avrdude info: direction: 0x000b, value: 0x0008, inversion: 0x0000
LED Mask=0x0000 value =0x0008 &=0x0000
avrdude info: direction: 0x0000, value: 0x0000, inversion: 0x0000

avrdude done.  Thank you.








> --
> cheers, J"org               .-.-.   --... ...--   -.. .  DL8DTL
>
> http://www.sax.de/~joerg/                        NIC: JW11-RIPE
> Never trust an operating system you don't have sources for. ;-)
>
> _______________________________________________
> avrdude-dev mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avrdude-dev
>