[avrdude-dev] avrdude and avarice under Mac OS X

[Xiaofan Chen]

I am able to build avrdude and avarice under Mac OS X Lion,
with libusb-1.0 git HEAD and libusb-compat-0.1.3.
No issue here with my limited tests.

I am using the Homebrew formula from nedos. It is a bit tricky
to build binutils, so I also use his binutils formula.
https://github.com/nedos/homebrew/blob/avarice/Library/Formula/avarice.rb
https://github.com/nedos/homebrew/blob/binutils/Library/Formula/binutils.rb
(need the --with-libiberty and --with-bfd)

I do not need his avrdude patch with my AVR Dragon.
https://github.com/nedos/homebrew/blob/avrdude/Library/Formula/avrdude.rb

Xiaofans-Mac-mini:avrdude_test xiaofanc$ avarice --dragon -j usb -d -P
USB1287 -v -f ./USBKEY-series6-ms_df.elf :4242
AVaRICE version 2.12svn20111212, Dec 28 2011 22:37:34

Defaulting JTAG bitrate to 250 kHz.

Found JTAG ICE, serno: 00A200001487
JTAG config starting.
Attempting synchronisation at bitrate 19200

command[0x01, 1]: 01
recv: 0x1b
recv: 0x00
recv: 0x00
recv: 0x1a
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 26 bytes
read:  86 01 ff 0e 07 01 ff 0e 07 02 00 a2 00 00 14 87 41 56 52 44 52
41 47 4f 4e 00
recv: 0x8c
recv: 0xd5
CRC OK
Got message seqno 0 (command_sequence == 0)
response: 86 01 FF 0E 07 01 FF 0E 07 02 00 A2 00 00 14 87 41 56 52 44
52 41 47 4F 4E 00
Found a device: AVRDRAGON
Serial number:  00:a2:00:00:14:87
JTAG ICE mkII sign-on message:
Communications protocol version: 1
M_MCU:
 boot-loader FW version:        255
 firmware version:              7.14
 hardware version:              1
S_MCU:
 boot-loader FW version:        255
 firmware version:              7.14
 hardware version:              2

command[0x02, 1]: 02 03 01
recv: 0x1b
recv: 0x01
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0xcd
recv: 0x83
CRC OK
Got message seqno 1 (command_sequence == 1)
response: 80

command[0x0a, 1]: 0A 01
recv: 0x1b
recv: 0x02
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0x1d
recv: 0x09
CRC OK
Got message seqno 2 (command_sequence == 2)
response: 80
recv: 0x1b
recv: 0xff
recv: 0xff
recv: 0x06
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 6 bytes
read:  e0 00 00 00 00 00
recv: 0x4e
recv: 0x2d
CRC OKAutomatic device detection:
command[0x03, 1]: 03 0E
recv: 0x1b
recv: 0x03
recv: 0x00
recv: 0x05
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 5 bytes
read:  81 3f 20 78 09
recv: 0x48
recv: 0xb4
CRC OK
Got message seqno 3 (command_sequence == 3)
response: 81 3F 20 78 09
JTAG id = 0x978203F : Ver = 0x0 : Device = 0x9782 : Manuf = 0x1f
Reported JTAG device ID: 0x9782
Looking for device: USB1287
No configuration available for device ID: 9782

command[0x23, 1]: 23
recv: 0x1b
recv: 0x04
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0xac
recv: 0x14
CRC OK
Got message seqno 4 (command_sequence == 4)
response: 80

command[0x00, 1]: 00
recv: 0x1b
recv: 0x05
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0x13
recv: 0x95
CRC OK
Got message seqno 5 (command_sequence == 5)
response: 80

-- 
Xiaofan