[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #38580] Current svn head, xmega and fuses, all fuses
From: |
Claus-Justus Heine |
Subject: |
[avrdude-dev] [bug #38580] Current svn head, xmega and fuses, all fuses tied to fuse0 |
Date: |
Sun, 24 Mar 2013 13:22:58 +0000 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 |
URL:
<http://savannah.nongnu.org/bugs/?38580>
Summary: Current svn head, xmega and fuses, all fuses tied to
fuse0
Project: AVR Downloader/UploaDEr
Submitted by: rotdrop
Submitted on: So 24 Mär 2013 13:22:56 GMT
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Claus-Justus Heine
Originator Email:
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
The current head version of the svn trunk of avrdude contains a bug which ties
all access to fuses on the XMega parts to fuse0, at least when using the jtag3
in PDI mode. However, I suspect that at least with the jtag2 ICE the same
problem exists.
The point is that jtag3_read_byte() uses
strncmp("fuse", ..., strlen("fuse")
However, any offset definition from /etc/avrdude.conf is ignored, so strncmp()
very happily return 0 for fuse0 ... fuse5, but the address record stays at
zero, though the base-address used with the programmer is that for fuse0.
The attached patch addresses this issue with two different approaches:
1 Insert a "fuses" memory section into the part definition in avrdude.conf.
Fuses can then be programmed and read back as a usual memory region. This may
not be too clever, as normally there is no fuse3 for the xmega. But of course,
one could insert a fusesA and a fusesB region which leave out any holes in the
fuses address range.
2 Change the individual programmer-driver to really check for the name fuse0
... fuse5. To do so XXX_read_byte() and XXX_write_byte() have to be changed
appropriately. The attached patch proposes one possible hack-around for the
jtag3 programmer. If that patch is accepted, the source code for all other
affected programmers could be changed accordingly.
Best,
Claus
_______________________________________________________
File Attachments:
-------------------------------------------------------
Date: So 24 Mär 2013 13:22:56 GMT Name: avrdude-9999-r1139-fuses.patch
Size: 2kB By: rotdrop
Patch against svn r1139
<http://savannah.nongnu.org/bugs/download.php?file_id=27670>
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?38580>
_______________________________________________
Nachricht gesendet von/durch Savannah
http://savannah.nongnu.org/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [avrdude-dev] [bug #38580] Current svn head, xmega and fuses, all fuses tied to fuse0,
Claus-Justus Heine <=