avrdude-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[avrdude-dev] [bug #40493] Can't program boot section of xmega256a3


From: anonymous
Subject: [avrdude-dev] [bug #40493] Can't program boot section of xmega256a3
Date: Wed, 06 Nov 2013 16:14:30 +0000
User-agent: Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:25.0) Gecko/20100101 Firefox/25.0

URL:
  <http://savannah.nongnu.org/bugs/?40493>

                 Summary: Can't program boot section of xmega256a3
                 Project: AVR Downloader/UploaDEr
            Submitted by: None
            Submitted on: Wed 06 Nov 2013 04:14:29 PM UTC
                Category: None
                Severity: 3 - Normal
                Priority: 5 - Normal
              Item Group: None
                  Status: None
                 Privacy: Public
             Assigned to: None
         Originator Name: avrdude
        Originator Email: address@hidden
             Open/Closed: Open
         Discussion Lock: Any

    _______________________________________________________

Details:


I'm using avrdude 6.01 and JTAGICEmkII and try to programm the boot section 
of the xmega256a3 with the following command:

avrdude -c jtag2pdi -P usb -p x256a3 -e -U flash:w:atxmega.hex:i


Output of avrdude:


avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9842
avrdude: erasing chip
avrdude: reading input file "atxmega.hex"
avrdude: writing flash (262232 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 262232 bytes of flash written
avrdude: verifying flash memory against atxmega.hex:
avrdude: load data flash data from input file atxmega.hex:
avrdude: input file atxmega.hex contains 262232 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.03s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x40000
         0xff != 0xcf
avrdude: verification error; content mismatch

avrdude done.  Thank you.


When i use the same hex file and program my device with AtmelStudio 6.1 
everything is ok. This means my JTAGICEmkII works correct.



    _______________________________________________________

File Attachments:


-------------------------------------------------------
Date: Wed 06 Nov 2013 04:14:29 PM UTC  Name: atxmega.hex  Size: 2kB   By: None

<http://savannah.nongnu.org/bugs/download.php?file_id=29547>

    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?40493>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/




reply via email to

[Prev in Thread] Current Thread [Next in Thread]