[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #41928] Avrdude fails to burn flash of Atmega328p usi
From: |
anonymous |
Subject: |
[avrdude-dev] [bug #41928] Avrdude fails to burn flash of Atmega328p using buspirate with Arduino IDE |
Date: |
Fri, 21 Mar 2014 20:37:19 +0000 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:27.0) Gecko/20100101 Firefox/27.0 |
URL:
<http://savannah.nongnu.org/bugs/?41928>
Summary: Avrdude fails to burn flash of Atmega328p using
buspirate with Arduino IDE
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: vie 21 mar 2014 20:37:18 UTC
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Roberto Aragón
Originator Email: address@hidden
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
If using the buspirate support on avrdude 6.1 (and 5.5 also tested), the flash
gets corrupted the second time it is used with arduino IDE (the first time
always ends with success).
The only workaround is to use avrdude with the "-e" switch (or without "-D" to
avoid automatic flash erasure). The MCU is then correctly flashed every time,
but the RESET support is gone. This is the expected behaviour, since erasing
the flash also erases the bootloader and the RESET support.
The short error message shown is something like this:
Attempting to initiate BusPirate binary mode...
avrdude: verification error, first mismatch at byte 0x010a
0x68 != 0x6a
avrdude: verification error; content mismatch
I compiled avrdude 6.1 from scratch in a GNU/Linux machine and copied the
configuration file and the executable to the tools dir of the Arduino IDE with
identical results.
Maybe this is the expected behaviour. If so, I apologize, I'm a beginner and
maybe I misunderstood something about this tool.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?41928>
_______________________________________________
Mensaje enviado vía/por Savannah
http://savannah.nongnu.org/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [avrdude-dev] [bug #41928] Avrdude fails to burn flash of Atmega328p using buspirate with Arduino IDE,
anonymous <=