[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #43268] usb_drain() call causes LUFA AVR-ISP MKII Cod
|
From: |
Joerg Wunsch |
|
Subject: |
[avrdude-dev] [bug #43268] usb_drain() call causes LUFA AVR-ISP MKII Code to Fail |
|
Date: |
Mon, 22 Sep 2014 08:45:29 +0000 |
|
User-agent: |
Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:31.0) Gecko/20100101 Firefox/31.0 |
Follow-up Comment #3, bug #43268 (project avrdude):
OK, using it under Linux, it "just works":
% avrdude -P usb -p m328p -c avrisp2 -vvvv
avrdude: Version 6.1-20140519, compiled on May 19 2014 at 12:02:47
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/usr/local/etc/avrdude.conf"
User configuration file is "/home/jwunsch/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : usb
Using Programmer : avrisp2
avrdude: usbdev_open(): Found AVRISP mkII, serno: 000200212345
avrdude: Sent: . [01]
avrdude: Recv: . [01] . [00] . [0a] A [41] V [56] R [52] I [49] S [53] P [50]
_ [5f] M [4d] K [4b] 2 [32]
avrdude: stk500v2_getsync(): found AVRISP mkII programmer
AVR Part : ATmega328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600
3600 0xff 0xff
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
flash 65 6 128 0 yes 32768 128 256 4500
4500 0xff 0xff
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
lfuse 0 0 0 0 no 1 0 0 4500
4500 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
hfuse 0 0 0 0 no 1 0 0 4500
4500 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
efuse 0 0 0 0 no 1 0 0 4500
4500 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
lock 0 0 0 0 no 1 0 0 4500
4500 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
calibration 0 0 0 0 no 1 0 0 0
0 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
Programmer Type : STK500V2
Description : Atmel AVR ISP mkII
Programmer Model: AVRISP mkII
avrdude: Sent: . [03] . [90]
avrdude: Recv: . [03] . [00] . [00]
avrdude: Sent: . [03] . [91]
avrdude: Recv: . [03] . [00] . [01]
avrdude: Sent: . [03] . [92]
avrdude: Recv: . [03] . [00] . [17]
Hardware Version: 0
Firmware Version Master : 1.23
avrdude: Sent: . [03] . [94]
avrdude: Recv: . [03] . [00] . [1f]
Vtarget : 3.1 V
avrdude: Sent: . [03] . [98]
avrdude: Recv: . [03] . [00] . [12]
SCK period : 19.37 us
avrdude: Sent: . [10] . [c8] d [64] . [19] [20] . [00] S [53] . [03] . [ac]
S [53] . [00] . [00]
avrdude: Recv: . [10] . [c0]
avrdude: stk500v2_command(): command failed
avrdude: Sent: . [03] . [a1]
avrdude: Recv: . [03] . [00] . [10]
avrdude: stk500v2_program_enable(): bad AVRISPmkII connection status: Target
not detected
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
avrdude: Sent: . [11] . [01] . [01]
avrdude: Recv: . [11] . [00]
avrdude done. Thank you.
I think that's basically the expected behaviour for the fake
programmer. Under Windows (in a VM), I can see the timeouts
though.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?43268>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/