bug-automake
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

bug#44772: [address@hidden: bug#44772: 2 test failures in automake 1.16.

From: Reuben Thomas
Subject: bug#44772: [address@hidden: bug#44772: 2 test failures in automake 1.16.3]
Date: Sat, 21 Nov 2020 13:45:20 +0000
[CCing the bug, though this email wasn't addressed to it; looks like it should have been, though!]

Indeed, the generated C file shouldn't be rebuilt; the existing distributed C source file should be used.

I tried the test with v1.16.3 and it passed for me. Looking at the logs, I found this line in Bruno's:

cc -DPACKAGE_NAME=\"vala-headers\" -DPACKAGE_TARNAME=\"vala-headers\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-headers\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-headers\" -DVERSION=\"1.0\" -I. -I../..    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT quux.o -MD -MP -MF .deps/quux.Tpo -c -o quux.o quux.c

whereas in mine it was:

cc -DPACKAGE_NAME=\"vala-headers\" -DPACKAGE_TARNAME=\"vala-headers\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-headers\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-headers\" -DVERSION=\"1.0\" -I. -I../..    -isystem/usr/include/glib-2.0 -isystem/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT quux.o -MD -MP -MF .deps/quux.Tpo -c -o quux.o ../../quux.c
Note the different path to the source file quux.c. Although, this does not happen with zardoz.c (the source path is "zardoz.c" in the cwd for both Bruno's log and mine), and that command succeeds for both of us.

This smells of race condition to me, and indeed if I unset MAKEFLAGS (I usually have "-j 14") and run it again, then the path for zardoz.c is ../../zardoz.c. However, maybe it's not parallel building that's the problem; could it be a problem with the test:

find -L $(srcdir)/quux.c -prune -newer $(srcdir)/quux.vala)

? The mtimes have only second resolution (set that way by tar) and so the tests could come out either way.

The find rule could be fixed by making the test "not older" rather than "newer" (leaving a different potential race condition, but a much rarer one that would rely on very quick editing of the Vala source!). Specifically, line 5737 of automake.in would become:

            . "\t\@if test ! -f \$@ && test \$(srcdir) != \$(builddir) && test -n \"\$\$(find -L \$(srcdir)/$vala_file) -prune \! -newer \$(srcdir)/$c_file\"; then cp -p \$(srcdir)/$c_file $built_c_file; fi\n"

But that doesn't seem to be the whole story, since in Bruno's case the result was "file not found" whereas in my case it was "use a different source file".

On Fri, 20 Nov 2020 at 23:22, Karl Berry <karl@freefriends.org> wrote:
Reuben - any chance you can look into this vala failure?

It seems that, (only) in the make distcheck done inside the test, the .c
files are not remade from the .vala?

Thanks,
Karl


Date: Fri, 20 Nov 2020 22:25:55 +0100
From: Bruno Haible <bruno@clisp.org>
Resent-From: Bruno Haible <bruno@clisp.org>
Resent-CC: bug-automake@gnu.org
Resent-Date: Fri, 20 Nov 2020 21:27:02 +0000
Resent-Message-ID: <handler.44772.B.160590757727033@debbugs.gnu.org>
Resent-Sender: help-debbugs@gnu.org
To:  <44772@debbugs.gnu.org>
Subject: bug#44772: 2 test failures in automake 1.16.3

--1456002724-1605909332=:28818
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

On a glibc system, I'm seeing 2 test failures in automake 1.16.3:
$ ./configure --prefix=/arch/x86_64-linux-gnu/gnu-inst-automake/1.16.3
$ make
$ make check
..
FAIL: t/vala-headers.sh
..
FAIL: t/vala-mix2.sh
..

Find attached the log files (redacted for privacy reasons).

vala and valac exist in /usr/bin.

Bruno

--1456002724-1605909332=:28818
Content-Disposition: attachment; filename="vala-headers.log"
Content-Type: text/x-log; charset="UTF-8"; name="vala-headers.log"
Content-Transfer-Encoding: 7bit

vala-headers: running pkg-config --version
0.29.1
vala-headers: running valac --version
Vala 0.30.1
vala-headers: determine whether make is GNU make
GNU Make 4.3
Lizenz GPLv3+: GNU GPL Version 3 oder später <http://gnu.org/licenses/gpl.html>
pkg-config version: 0.29.1
dnl pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
dnl serial 11 (pkg-config-0.29.1)
dnl
dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful, but
dnl WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
dnl 02111-1307, USA.
Running from installcheck: no
Test Protocol: none
PATH = /BUILD/automake-1.16.3/bin:/BUILD/automake-1.16.3/t/ax:/HIDDEN/PATH
++ pwd
/BUILD/automake-1.16.3/t/vala-headers.dir
+ cat
+ cat
+ headers='HDR.h hello.vapi foo.h foo2.h foo3.vapi'
+ cat
+ aclocal-1.16 -Werror
+ autoconf
+ automake-1.16 --foreign -Werror -Wall -a
+ ./configure
checking for a BSD-compatible install... /arch/local/x86_64-linux/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /arch/local/x86_64-linux/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether cc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of cc... gcc3
checking for valac... /usr/bin/valac
checking whether /usr/bin/valac supports at least API version 0.7.0... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GOBJECT... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
+ make
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac -H foo.h --internal-header foo2.h --internal-vapi foo3.vapi  -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
cc -DPACKAGE_NAME=\"vala-headers\" -DPACKAGE_TARNAME=\"vala-headers\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-headers\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-headers\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT zardoz.o -MD -MP -MF .deps/zardoz.Tpo -c -o zardoz.o zardoz.c
mv -f .deps/zardoz.Tpo .deps/zardoz.Po
cc -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2   -o zardoz zardoz.o -lgobject-2.0 -lglib-2.0
sed 's/Zardoz/Quux/' <zardoz.vala >quux.vala
rm -f quux_vala.stamp && echo stamp > quux_vala.stamp-t
/usr/bin/valac --header HDR.h --vapi hello.vapi  -C quux.vala
mv -f quux_vala.stamp-t quux_vala.stamp
cc -DPACKAGE_NAME=\"vala-headers\" -DPACKAGE_TARNAME=\"vala-headers\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-headers\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-headers\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT quux.o -MD -MP -MF .deps/quux.Tpo -c -o quux.o quux.c
mv -f .deps/quux.Tpo .deps/quux.Po
cc -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2   -o quux quux.o -lgobject-2.0 -lglib-2.0
+ for h in '$headers'
+ rm -f HDR.h
+ make HDR.h
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f quux_vala.stamp && echo stamp > quux_vala.stamp-t
/usr/bin/valac --header HDR.h --vapi hello.vapi  -C quux.vala
mv -f quux_vala.stamp-t quux_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
+ test -f HDR.h
+ for h in '$headers'
+ rm -f hello.vapi
+ make hello.vapi
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f quux_vala.stamp && echo stamp > quux_vala.stamp-t
/usr/bin/valac --header HDR.h --vapi hello.vapi  -C quux.vala
mv -f quux_vala.stamp-t quux_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
+ test -f hello.vapi
+ for h in '$headers'
+ rm -f foo.h
+ make foo.h
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac -H foo.h --internal-header foo2.h --internal-vapi foo3.vapi  -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
+ test -f foo.h
+ for h in '$headers'
+ rm -f foo2.h
+ make foo2.h
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac -H foo.h --internal-header foo2.h --internal-vapi foo3.vapi  -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
+ test -f foo2.h
+ for h in '$headers'
+ rm -f foo3.vapi
+ make foo3.vapi
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac -H foo.h --internal-header foo2.h --internal-vapi foo3.vapi  -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
+ test -f foo3.vapi
+ rm -f HDR.h hello.vapi foo.h foo2.h foo3.vapi
+ make HDR.h hello.vapi foo.h foo2.h foo3.vapi
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f quux_vala.stamp && echo stamp > quux_vala.stamp-t
/usr/bin/valac --header HDR.h --vapi hello.vapi  -C quux.vala
mv -f quux_vala.stamp-t quux_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
make: „hello.vapi“ ist bereits aktuell.
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac -H foo.h --internal-header foo2.h --internal-vapi foo3.vapi  -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
make: „foo2.h“ ist bereits aktuell.
make: „foo3.vapi“ ist bereits aktuell.
+ for h in '$headers'
+ test -f HDR.h
+ for h in '$headers'
+ test -f hello.vapi
+ for h in '$headers'
+ test -f foo.h
+ for h in '$headers'
+ test -f foo2.h
+ for h in '$headers'
+ test -f foo3.vapi
+ make distcheck
make  dist-gzip am__post_remove_distdir='@:'
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
make  distdir-am
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird betreten
if test -d "vala-headers-1.0"; then find "vala-headers-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "vala-headers-1.0" || { sleep 5 && rm -rf "vala-headers-1.0"; }; else :; fi
test -d "vala-headers-1.0" || mkdir "vala-headers-1.0"
test -n "" \
|| find "vala-headers-1.0" -type d ! -perm -755 \
        -exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /BUILD/automake-1.16.3/t/vala-headers.dir/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "vala-headers-1.0"
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
tardir=vala-headers-1.0 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >vala-headers-1.0.tar.gz
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir“ wird verlassen
if test -d "vala-headers-1.0"; then find "vala-headers-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "vala-headers-1.0" || { sleep 5 && rm -rf "vala-headers-1.0"; }; else :; fi
case 'vala-headers-1.0.tar.gz' in \
*.tar.gz*) \
  eval GZIP= gzip --best -dc vala-headers-1.0.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
  bzip2 -dc vala-headers-1.0.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
  lzip -dc vala-headers-1.0.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
  xz -dc vala-headers-1.0.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
  uncompress -c vala-headers-1.0.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
  eval GZIP= gzip --best -dc vala-headers-1.0.shar.gz | unshar ;;\
*.zip*) \
  unzip vala-headers-1.0.zip ;;\
*.tar.zst*) \
  zstd -dc vala-headers-1.0.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w vala-headers-1.0
chmod u+w vala-headers-1.0
mkdir vala-headers-1.0/_build vala-headers-1.0/_build/sub vala-headers-1.0/_inst
chmod a-w vala-headers-1.0
test -d vala-headers-1.0/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd vala-headers-1.0/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
  && am__cwd=`pwd` \
  && CDPATH="${ZSH_VERSION+.}:" && cd vala-headers-1.0/_build/sub \
  && ../../configure \
     \
     \
    --srcdir=../.. --prefix="$dc_install_base" \
  && make  \
  && make  dvi \
  && make  check \
  && make  install \
  && make  installcheck \
  && make  uninstall \
  && make  distuninstallcheck_dir="$dc_install_base" \
        distuninstallcheck \
  && chmod -R a-w "$dc_install_base" \
  && ({ \
       (cd ../.. && umask 077 && mkdir "$dc_destdir") \
       && make  DESTDIR="$dc_destdir" install \
       && make  DESTDIR="$dc_destdir" uninstall \
       && make  DESTDIR="$dc_destdir" \
            distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
      } || { rm -rf "$dc_destdir"; exit 1; }) \
  && rm -rf "$dc_destdir" \
  && make  dist \
  && rm -rf vala-headers-1.0.tar.gz \
  && make  distcleancheck \
  && cd "$am__cwd" \
  || exit 1
checking for a BSD-compatible install... /arch/local/x86_64-linux/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /arch/local/x86_64-linux/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether cc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of cc... gcc3
checking for valac... /usr/bin/valac
checking whether /usr/bin/valac supports at least API version 0.7.0... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GOBJECT... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir/vala-headers-1.0/_build/sub“ wird betreten
cc -DPACKAGE_NAME=\"vala-headers\" -DPACKAGE_TARNAME=\"vala-headers\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-headers\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-headers\" -DVERSION=\"1.0\" -I. -I../..    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT zardoz.o -MD -MP -MF .deps/zardoz.Tpo -c -o zardoz.o zardoz.c
mv -f .deps/zardoz.Tpo .deps/zardoz.Po
cc -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2   -o zardoz zardoz.o -lgobject-2.0 -lglib-2.0
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir/vala-headers-1.0/_build/sub“ wird betreten
make[2]: „../../quux_vala.stamp“ ist bereits aktuell.
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir/vala-headers-1.0/_build/sub“ wird verlassen
cc -DPACKAGE_NAME=\"vala-headers\" -DPACKAGE_TARNAME=\"vala-headers\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-headers\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-headers\" -DVERSION=\"1.0\" -I. -I../..    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT quux.o -MD -MP -MF .deps/quux.Tpo -c -o quux.o quux.c
cc: error: quux.c: Datei oder Verzeichnis nicht gefunden
cc: fatal error: no input files
compilation terminated.
make[1]: *** [Makefile:406: quux.o] Fehler 1
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-headers.dir/vala-headers-1.0/_build/sub“ wird verlassen
make: *** [Makefile:619: distcheck] Fehler 1
+ am_exit_trap 2
+ exit_status=2
+ set +e
+ cd /BUILD/automake-1.16.3
+ test none = tap
+ case $am_explicit_skips in
+ test 2 -eq 0
+ keep_testdirs=yes
+ am_keeping_testdirs
+ case $keep_testdirs in
+ return 0
+ set +x
FAIL t/vala-headers.sh (exit status: 2)

--1456002724-1605909332=:28818
Content-Disposition: attachment; filename="vala-mix2.log"
Content-Type: text/x-log; charset="UTF-8"; name="vala-mix2.log"
Content-Transfer-Encoding: 7bit

vala-mix2: running valac --version
Vala 0.30.1
vala-mix2: running pkg-config --version
0.29.1
vala-mix2: determine whether make is GNU make
GNU Make 4.3
Lizenz GPLv3+: GNU GPL Version 3 oder später <http://gnu.org/licenses/gpl.html>
pkg-config version: 0.29.1
dnl pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
dnl serial 11 (pkg-config-0.29.1)
dnl
dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful, but
dnl WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
dnl 02111-1307, USA.
Running from installcheck: no
Test Protocol: none
PATH = /BUILD/automake-1.16.3/bin:/BUILD/automake-1.16.3/t/ax:/HIDDEN/PATH
++ pwd
/BUILD/automake-1.16.3/t/vala-mix2.dir
+ cat
+ cat
+ cat
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.16 -Werror
+ automake-1.16 --foreign -Werror -Wall -a
+ autoconf
+ ./configure --enable-dependency-tracking
checking for a BSD-compatible install... /arch/local/x86_64-linux/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /arch/local/x86_64-linux/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether cc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of cc... gcc3
checking whether we are using the GNU C++ compiler... yes
checking whether c++ -std=gnu++11 accepts -g... yes
checking dependency style of c++ -std=gnu++11... gcc3
checking for valac... /usr/bin/valac
checking whether /usr/bin/valac supports at least API version 0.7.3... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GOBJECT... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
+ make all
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac   -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT zardoz.o -MD -MP -MF .deps/zardoz.Tpo -c -o zardoz.o zardoz.c
mv -f .deps/zardoz.Tpo .deps/zardoz.Po
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o bar.c
mv -f .deps/bar.Tpo .deps/bar.Po
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT baz.o -MD -MP -MF .deps/baz.Tpo -c -o baz.o baz.c
mv -f .deps/baz.Tpo .deps/baz.Po
c++ -std=gnu++11 -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.     -g -O2 -MT master.o -MD -MP -MF .deps/master.Tpo -c -o master.o master.cxx
mv -f .deps/master.Tpo .deps/master.Po
c++ -std=gnu++11  -g -O2   -o zardoz zardoz.o bar.o baz.o master.o -lgobject-2.0 -lglib-2.0
+ ls -l
insgesamt 516
-rw-rw-r-- 1 bruno bruno  54055 20. Nov 02:59 aclocal.m4
drwxr-xr-x 2 bruno bruno   4096 20. Nov 02:59 autom4te.cache
-rw-rw-r-- 1 bruno bruno     57 20. Nov 02:59 bar.c
-rw-rw-r-- 1 bruno bruno   2976 20. Nov 03:00 bar.o
-rw-rw-r-- 1 bruno bruno     59 20. Nov 02:59 baz.c
-rw-rw-r-- 1 bruno bruno   2760 20. Nov 03:00 baz.o
-rwxr-xr-x 1 bruno bruno   7400 20. Nov 02:59 compile
-rw-rw-r-- 1 bruno bruno  14787 20. Nov 03:00 config.log
-rwxrwxr-x 1 bruno bruno  30038 20. Nov 02:59 config.status
-rwxrwxr-x 1 bruno bruno 165598 20. Nov 02:59 configure
-rw-rw-r-- 1 bruno bruno    180 20. Nov 02:59 configure.ac
-rwxr-xr-x 1 bruno bruno  23568 20. Nov 02:59 depcomp
-rw-rw-r-- 1 bruno bruno     48 20. Nov 02:59 foo.h
-rwxr-xr-x 1 bruno bruno  15358 20. Nov 02:59 install-sh
-rw-rw-r-- 1 bruno bruno  27203 20. Nov 03:00 Makefile
-rw-rw-r-- 1 bruno bruno    148 20. Nov 02:59 Makefile.am
-rw-rw-r-- 1 bruno bruno  27272 20. Nov 02:59 Makefile.in
-rw-rw-r-- 1 bruno bruno     76 20. Nov 02:59 master.cxx
-rw-rw-r-- 1 bruno bruno  37368 20. Nov 03:00 master.o
-rwxr-xr-x 1 bruno bruno   6878 20. Nov 02:59 missing
-rwxrwxr-x 1 bruno bruno  32368 20. Nov 03:00 zardoz
-rw-rw-r-- 1 bruno bruno    473 20. Nov 03:00 zardoz.c
-rw-rw-r-- 1 bruno bruno   8760 20. Nov 03:00 zardoz.o
-rw-rw-r-- 1 bruno bruno     64 20. Nov 02:59 zardoz.vala
-rw-rw-r-- 1 bruno bruno      6 20. Nov 03:00 zardoz_vala.stamp
-rw-rw-r-- 1 bruno bruno     20 20. Nov 02:59 zen.hh
+ have_generated_files
+ test -f zardoz_vala.stamp
+ test -f zardoz.c
+ make -q
+ make -n
+ /arch/local/x86_64-linux-gnu/bin/grep -F vala.stamp
+ for file in zardoz.vala foo.h bar.c baz.c zen.hh master.cxx
+ sleep 2
+ echo '& choke me !'
+ make
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac   -C zardoz.vala
zardoz.vala:6.1-6.1: error: syntax error, expected identifier
& choke me !
^
Compilation failed: 1 error(s), 0 warning(s)
make: *** [Makefile:440: zardoz_vala.stamp] Fehler 1
+ sleep 2
+ sed '$d' zardoz.vala
+ mv -f t zardoz.vala
+ make
rm -f zardoz_vala.stamp && echo stamp > zardoz_vala.stamp-t
/usr/bin/valac   -C zardoz.vala
mv -f zardoz_vala.stamp-t zardoz_vala.stamp
+ for file in zardoz.vala foo.h bar.c baz.c zen.hh master.cxx
+ sleep 2
+ echo '& choke me !'
+ make
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o bar.c
In file included from bar.c:1:0:
foo.h:4:1: error: expected identifier or ‘(’ before ‘&’ token
 & choke me !
 ^
make: *** [Makefile:405: bar.o] Fehler 1
+ sleep 2
+ sed '$d' foo.h
+ mv -f t foo.h
+ make
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o bar.c
mv -f .deps/bar.Tpo .deps/bar.Po
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT baz.o -MD -MP -MF .deps/baz.Tpo -c -o baz.o baz.c
mv -f .deps/baz.Tpo .deps/baz.Po
c++ -std=gnu++11  -g -O2   -o zardoz zardoz.o bar.o baz.o master.o -lgobject-2.0 -lglib-2.0
+ for file in zardoz.vala foo.h bar.c baz.c zen.hh master.cxx
+ sleep 2
+ echo '& choke me !'
+ make
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o bar.c
bar.c:3:1: error: expected identifier or ‘(’ before ‘&’ token
 & choke me !
 ^
make: *** [Makefile:405: bar.o] Fehler 1
+ sleep 2
+ sed '$d' bar.c
+ mv -f t bar.c
+ make
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o bar.c
mv -f .deps/bar.Tpo .deps/bar.Po
c++ -std=gnu++11  -g -O2   -o zardoz zardoz.o bar.o baz.o master.o -lgobject-2.0 -lglib-2.0
+ for file in zardoz.vala foo.h bar.c baz.c zen.hh master.cxx
+ sleep 2
+ echo '& choke me !'
+ make
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT baz.o -MD -MP -MF .deps/baz.Tpo -c -o baz.o baz.c
baz.c:4:1: error: expected identifier or ‘(’ before ‘&’ token
 & choke me !
 ^
make: *** [Makefile:405: baz.o] Fehler 1
+ sleep 2
+ sed '$d' baz.c
+ mv -f t baz.c
+ make
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT baz.o -MD -MP -MF .deps/baz.Tpo -c -o baz.o baz.c
mv -f .deps/baz.Tpo .deps/baz.Po
c++ -std=gnu++11  -g -O2   -o zardoz zardoz.o bar.o baz.o master.o -lgobject-2.0 -lglib-2.0
+ for file in zardoz.vala foo.h bar.c baz.c zen.hh master.cxx
+ sleep 2
+ echo '& choke me !'
+ make
c++ -std=gnu++11 -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.     -g -O2 -MT master.o -MD -MP -MF .deps/master.Tpo -c -o master.o master.cxx
In file included from master.cxx:1:0:
zen.hh:2:9: error: expected constructor, destructor, or type conversion before ‘me’
 & choke me !
         ^
make: *** [Makefile:419: master.o] Fehler 1
+ sleep 2
+ sed '$d' zen.hh
+ mv -f t zen.hh
+ make
c++ -std=gnu++11 -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.     -g -O2 -MT master.o -MD -MP -MF .deps/master.Tpo -c -o master.o master.cxx
mv -f .deps/master.Tpo .deps/master.Po
c++ -std=gnu++11  -g -O2   -o zardoz zardoz.o bar.o baz.o master.o -lgobject-2.0 -lglib-2.0
+ for file in zardoz.vala foo.h bar.c baz.c zen.hh master.cxx
+ sleep 2
+ echo '& choke me !'
+ make
c++ -std=gnu++11 -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.     -g -O2 -MT master.o -MD -MP -MF .deps/master.Tpo -c -o master.o master.cxx
master.cxx:3:9: error: expected constructor, destructor, or type conversion before ‘me’
 & choke me !
         ^
make: *** [Makefile:419: master.o] Fehler 1
+ sleep 2
+ sed '$d' master.cxx
+ mv -f t master.cxx
+ make
c++ -std=gnu++11 -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I.     -g -O2 -MT master.o -MD -MP -MF .deps/master.Tpo -c -o master.o master.cxx
mv -f .deps/master.Tpo .deps/master.Po
c++ -std=gnu++11  -g -O2   -o zardoz zardoz.o bar.o baz.o master.o -lgobject-2.0 -lglib-2.0
+ make distcheck
make  dist-gzip am__post_remove_distdir='@:'
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir“ wird betreten
make  distdir-am
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir“ wird betreten
if test -d "vala-mix2-1.0"; then find "vala-mix2-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "vala-mix2-1.0" || { sleep 5 && rm -rf "vala-mix2-1.0"; }; else :; fi
test -d "vala-mix2-1.0" || mkdir "vala-mix2-1.0"
test -n "" \
|| find "vala-mix2-1.0" -type d ! -perm -755 \
        -exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /BUILD/automake-1.16.3/t/vala-mix2.dir/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "vala-mix2-1.0"
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir“ wird verlassen
tardir=vala-mix2-1.0 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >vala-mix2-1.0.tar.gz
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir“ wird verlassen
if test -d "vala-mix2-1.0"; then find "vala-mix2-1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "vala-mix2-1.0" || { sleep 5 && rm -rf "vala-mix2-1.0"; }; else :; fi
case 'vala-mix2-1.0.tar.gz' in \
*.tar.gz*) \
  eval GZIP= gzip --best -dc vala-mix2-1.0.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
  bzip2 -dc vala-mix2-1.0.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
  lzip -dc vala-mix2-1.0.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
  xz -dc vala-mix2-1.0.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
  uncompress -c vala-mix2-1.0.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
  eval GZIP= gzip --best -dc vala-mix2-1.0.shar.gz | unshar ;;\
*.zip*) \
  unzip vala-mix2-1.0.zip ;;\
*.tar.zst*) \
  zstd -dc vala-mix2-1.0.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w vala-mix2-1.0
chmod u+w vala-mix2-1.0
mkdir vala-mix2-1.0/_build vala-mix2-1.0/_build/sub vala-mix2-1.0/_inst
chmod a-w vala-mix2-1.0
test -d vala-mix2-1.0/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd vala-mix2-1.0/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
  && am__cwd=`pwd` \
  && CDPATH="${ZSH_VERSION+.}:" && cd vala-mix2-1.0/_build/sub \
  && ../../configure \
     \
     \
    --srcdir=../.. --prefix="$dc_install_base" \
  && make  \
  && make  dvi \
  && make  check \
  && make  install \
  && make  installcheck \
  && make  uninstall \
  && make  distuninstallcheck_dir="$dc_install_base" \
        distuninstallcheck \
  && chmod -R a-w "$dc_install_base" \
  && ({ \
       (cd ../.. && umask 077 && mkdir "$dc_destdir") \
       && make  DESTDIR="$dc_destdir" install \
       && make  DESTDIR="$dc_destdir" uninstall \
       && make  DESTDIR="$dc_destdir" \
            distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
      } || { rm -rf "$dc_destdir"; exit 1; }) \
  && rm -rf "$dc_destdir" \
  && make  dist \
  && rm -rf vala-mix2-1.0.tar.gz \
  && make  distcleancheck \
  && cd "$am__cwd" \
  || exit 1
checking for a BSD-compatible install... /arch/local/x86_64-linux/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /arch/local/x86_64-linux/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether cc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of cc... gcc3
checking whether we are using the GNU C++ compiler... yes
checking whether c++ -std=gnu++11 accepts -g... yes
checking dependency style of c++ -std=gnu++11... gcc3
checking for valac... /usr/bin/valac
checking whether /usr/bin/valac supports at least API version 0.7.3... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GOBJECT... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir/vala-mix2-1.0/_build/sub“ wird betreten
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir/vala-mix2-1.0/_build/sub“ wird betreten
make[2]: „../../zardoz_vala.stamp“ ist bereits aktuell.
make[2]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir/vala-mix2-1.0/_build/sub“ wird verlassen
cc -DPACKAGE_NAME=\"vala-mix2\" -DPACKAGE_TARNAME=\"vala-mix2\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"vala-mix2\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"vala-mix2\" -DVERSION=\"1.0\" -I. -I../..    -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -g -O2 -MT zardoz.o -MD -MP -MF .deps/zardoz.Tpo -c -o zardoz.o zardoz.c
cc: error: zardoz.c: Datei oder Verzeichnis nicht gefunden
cc: fatal error: no input files
compilation terminated.
make[1]: *** [Makefile:405: zardoz.o] Fehler 1
make[1]: Verzeichnis „/BUILD/automake-1.16.3/t/vala-mix2.dir/vala-mix2-1.0/_build/sub“ wird verlassen
make: *** [Makefile:596: distcheck] Fehler 1
+ am_exit_trap 2
+ exit_status=2
+ set +e
+ cd /BUILD/automake-1.16.3
+ test none = tap
+ case $am_explicit_skips in
+ test 2 -eq 0
+ keep_testdirs=yes
+ am_keeping_testdirs
+ case $keep_testdirs in
+ return 0
+ set +x
FAIL t/vala-mix2.sh (exit status: 2)

--1456002724-1605909332=:28818--


--
https://rrt.sc3d.org
reply via email to
[Prev in Thread] Current Thread [Next in Thread]