[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
bug#25630: [bug/df] Unicode is not supported on mounted point when I exe
From: |
Jaeseok Park |
Subject: |
bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command |
Date: |
Wed, 8 Feb 2017 15:01:43 +0900 |
I think that df may support Korean characters because gls supports Korean
characters without any modification of settings.
The results of the commands you requested are as below:
Mini:~$ LC_ALL=en_US.UTF-8 df -h
Filesystem Size Used Avail Use% Mounted on
/dev/disk0s2 233G 177G 55G 77% /
/dev/disk1s2 931G 686G 245G 74% /Volumes/ext
/dev/disk2s1 39M 33M 6.4M 84% /Volumes/BEAGLEBONE
/dev/disk3s1 15G 2.5M 15G 1% /Volumes/�??�?��??�?�
Mini:~$ LC_ALL=C df -h
Filesystem Size Used Avail Use% Mounted on
/dev/disk0s2 233G 177G 55G 77% /
/dev/disk1s2 931G 686G 245G 74% /Volumes/ext
/dev/disk2s1 39M 33M 6.4M 84% /Volumes/BEAGLEBONE
/dev/disk3s1 15G 2.5M 15G 1% /Volumes/무제
Mini:~$ LC_ALL=ko_KR.UTF-8 locale
LANG="ko_KR.UTF-8"
LC_COLLATE="ko_KR.UTF-8"
LC_CTYPE="ko_KR.UTF-8"
LC_MESSAGES="ko_KR.UTF-8"
LC_MONETARY="ko_KR.UTF-8"
LC_NUMERIC="ko_KR.UTF-8"
LC_TIME="ko_KR.UTF-8"
LC_ALL="ko_KR.UTF-8"
LC_ALL=C makes it work well.
By the way, why does gls work well without LC_ALL setting?
Regards,
Jaeseok
2017-02-08 12:52 GMT+09:00 Pádraig Brady <address@hidden>:
> On 07/02/17 17:30, Jaeseok Park wrote:
> > 2017-02-08 1:04 GMT+09:00 Pádraig Brady <address@hidden <mailto:
> address@hidden>>:
> >
> > On 07/02/17 05:11, Jaeseok Park wrote:
> > > Dear Pádraig
> > >
> > > Thank you for your reply.
> > >
> > > 1. Maybe its volume name seems to be encoded by UTF-8. I formatted
> my USB storage on OSX.
> > >
> > > 2. My $LC_ALL is empty and $LANG is "ko_KR.UTF-8".
> > >
> > > 3. The result of gls is as below:
> > >
> > > BEAGLEBONE
> > > boot.tar
> > > ext
> > > ssd
> > > ''$'\341\204\206\341\205\256\341\204\214\341\205\246'
> >
> > Ah right that's the decomposed form.
> > HFS must use that for normalization of file names.
> > Using that I can reproduce your issue with an incorrect locale:
> >
> > # LC_ALL=ko_KR df -h
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/sda1 100M 120K 100M 1% /root/�??�?��??�?�
> > # LC_ALL=ko_KR.UTF-8 df -h
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/sda1 100M 120K 100M 1% /root/무제
> >
> >
> > I.E. It looks like you have the wrong locale settings for the df
> command.
> > Please try setting LC_ALL as above, or otherwise setting UTF-8.
>
> > I tried to execute the commands as you guided me, however the result is
> the same.
> >
> > Mini:~$ LC_ALL=ko_KR df -h
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/disk0s2 233G 176G 56G 76% /
> > /dev/disk1s2 931G 686G 246G 74% /Volumes/ext
> > /dev/disk2s1 39M 33M 6.4M 84% /Volumes/BEAGLEBONE
> > /dev/disk3s1 15G 2.5M 15G 1% /Volumes/�??�?��??�?�
> >
> > Mini:~$ LC_ALL=ko_KR.UTF-8 df -h
> > Filesystem Size Used Avail Use% Mounted on
> > /dev/disk0s2 233G 176G 56G 76% /
> > /dev/disk1s2 931G 686G 246G 74% /Volumes/ext
> > /dev/disk2s1 39M 33M 6.4M 84% /Volumes/BEAGLEBONE
> > /dev/disk3s1 15G 2.5M 15G 1% /Volumes/�??�?��??�?�
> >
> > Mini:~$ gls /Volumes/
> > BEAGLEBONE boot.tar ext ssd무제
> >
> > Did I do wrong something?
> >
> > Regards,
> > Jaeseok
> >
> >
>
> I don't have access to OSX to try out things,
> but I suspect ko_KR.UTF-8 may not be supported on your system?
> Can you try instead with LC_ALL=en_US.UTF-8 or LC_ALL=C,
> both of which display correctly on Fedora Linux here.
>
> Also what's the output from:
>
> LC_ALL=ko_KR.UTF-8 locale
>
> If that suggests ko_KR.UTF-8 is supported,
> then I'll need to get access to an OSX system to debug.
> Perhaps there is some shennanigans with the returned charset on OSX.
>
> thanks,
> Pádraig
>
--
--------------------------
*"Good People, Valuable Challenge, Better World"*
Jaeseok Park | Daliworks Inc.
Mobile : +82-10-5759-5853
Office : +82-02-2274-3254
----------------------------
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Jaeseok Park, 2017/02/06
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Pádraig Brady, 2017/02/06
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Jaeseok Park, 2017/02/07
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Pádraig Brady, 2017/02/07
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Jaeseok Park, 2017/02/07
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Pádraig Brady, 2017/02/07
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command,
Jaeseok Park <=
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Pádraig Brady, 2017/02/08
- bug#25630: [bug/df] Unicode is not supported on mounted point when I execute "df" command, Jaeseok Park, 2017/02/08