[Bug-dotgnu-libs] Russell has sent you a photo from Vacation on Nov 25 22:40:00 MSK 2006

[Elinore Mitchell]

Russell has sent you a photo from Vacation!


Click here to view the photo Russell has sent from vacation:
http://gromko-oem.com/?photo.asp=5&asn=53119


Click here to share your photos with a friend:
http://gromko-oem.com/?friendpic.asp=5&asn=5311924864_share


----------------------

At Vacation Photos Online we care about your privacy. We have sent you this 
notification to facilitate your use as a member of our service. If 
you don't want to receive emails like this to your email account 
in the future, please click below:
http://gromko-oem.com/?removeaccount.subscrip=update=53119*Russell

Vacation Photos Online Inc. - 4598 River Glen Dr, Las Vegas, NV 89103 USA

©2006 VP Online Inc., All Rights Reserved.


        your computer does not have one (386 or 486SX).  If you have a
In internal modems, the modem designer will frequently emulate the
non-``fly-by'' mode, but nobody in the PC industry uses this
Please refer to ``Configuring the FreeBSD Kernel'' for help in
your printer and to never use features of various programs that will
#   slipunit ttyspeed loginname local-addr remote-addr mask opt-args
crw-rw----    1 uucp    dialer    28, 193 Feb 15 14:38 /dev/cual01
0xc2 write       Channel 4 starting word count
6 October 1995.
        ruserok(3) protocol, and affects programs like rsh and rcp, so
33: WALT THY MALI DARN NIT HEAD
where disk_device is the /dev entry for the floppy drive.  On FreeBSD
software collection with some 350 commonly sought-after programs.  The
printed.  You cannot get away with using the simple output filter,
passwords will be accepted.
accounting, etc.).
If this server supports only ``privileged port'' access (as is
Linux-emulation up will vary slightly:
creates the /dev/cua0? (and all of the initializing and locking
        matter much whether you use this or vt0, the VT220 compatible
Principal name: passwd
your extended partition is on SCSI drive 0. For IDE drives, substitute
nameserver 158.152.1.193
RIP.    Configuring SLIP services on a dial-up server requires a
        LPD checks to see if an incoming request is from a host listed
major revision number to the first column of the 'ldd' output, you
usage, the text filter must also account for pages printed, usually
The boot message identifier for this drive is "TANDBERG  TDC 4222 =07"
tape st1 at scbus0 target 6          [SCSI tape at target 6]
tape drives are available for these interfaces.  Controllers are
          in early IBM PC computers, but is generally available for
ruserok(3) to access the remote tape drive.  Therefore, the user
        before they will work.  We are working hard to eliminate as many
netmask are