[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Bug #598] Message "GRUB Floppy Error" when using boot floppy
From: |
nobody |
Subject: |
[Bug #598] Message "GRUB Floppy Error" when using boot floppy |
Date: |
Mon, 12 Aug 2002 14:47:28 -0400 |
=================== BUG #598: LATEST MODIFICATIONS ==================
http://savannah.gnu.org/bugs/?func=detailbug&bug_id=598&group_id=68
Changes by: Chris Dryburgh <address@hidden>
Date: 2002-Aug-12 18:47 (GMT)
------------------ Additional Follow-up Comments ----------------------------
This was a bug in the BIOS itself. A BIOS update was able to fix this problem.
This bug should be considered closed.
=================== BUG #598: FULL BUG SNAPSHOT ===================
Submitted by: CDryburgh Project: GNU GRUB
Submitted on: 2002-Jun-13 17:08
Category: Booting Severity: Major
Priority: None Bug Group: Software Error
Resolution: None Assigned to: None
Status: Open Release: 0.92
Reproducibility: Every Time Planned Release:
Summary: Message "GRUB Floppy Error" when using boot floppy
Original Submission: Have put the GRUB floppy image on to a floppy and recieve
the message "GRUB Floppy Error". The command line never comes up.
Bad Floppy: No. Get to command line using same floppy on two other computers.
Bad Floppy Drive: No. Plugged floppy drive into another computer and got to
command line.
Incompatiable with BIOS: Only possibility that I can think of.
Message when turnig on computer.
"NVIDIA TNT2 Model 64 VGA BIOS
Version 3.05.00.10
Copyright (c) 1996-2000 NVidia Corp.
32.0 MB RAM"
The BIOS setup screen says "Award BIOS Setup Utility" at the top.
I intend to load the Hurd on to this computer but I understand that the Grub is
required to boot the OS. I have very little understanding of bootloaders so my
assistance with the fix may be limited.
Regards,
Chris
Follow-up Comments
*******************
-------------------------------------------------------
Date: 2002-Aug-12 18:47 By: CDryburgh
This was a bug in the BIOS itself. A BIOS update was able to fix this problem.
This bug should be considered closed.
-------------------------------------------------------
Date: 2002-Jun-20 17:55 By: CDryburgh
Bernhard, here are the drives that I have on my machine.
Floppy Drive, LG CD-ROM CRD-8522B, and MAXTOR 6l040J2(Hard Drive)
Changing the boot order did not make any difference. I am beginning to suspect
that I will have to wait for okuji to fix the "482 geometry doesn't work with
floppies" bug.
Thanks,
Chris
-------------------------------------------------------
Date: 2002-Jun-20 08:20 By: treutwein
Hi Chris,
do you have a ZIP or LS120/LS240 drive connected to you machine ? If so try
either to disconnect and/or changing the BIOS boot order of floppy drives.
I had a similar problem with Phoenix BIOS and a ZIP drive.
It was resolved by changing the boot order of the floppies.
regards
Bernhard
-------------------------------------------------------
Date: 2002-Jun-16 15:54 By: CDryburgh
Thankyou for responding. I have two questions.
1. What is geometry?
I have tried playing with BIOS settings but have not found the correct setting
yet. This looks like something for the FAQ.
2. How can I find the geometry setting on the floppy besides the trial and
error method?
Chris
-------------------------------------------------------
Date: 2002-Jun-16 02:22 By: okuji
I think it is likely that the geometry configured in your
BIOS setting isn't identical with that of your floppy.
Okuji
No files currently attached
For detailed info, follow this link:
http://savannah.gnu.org/bugs/?func=detailbug&bug_id=598&group_id=68
- [Bug #598] Message "GRUB Floppy Error" when using boot floppy,
nobody <=