[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bug #62920] Memory address error when booting from LUKS-encrypted /boot
From: |
Jason Yip |
Subject: |
[bug #62920] Memory address error when booting from LUKS-encrypted /boot |
Date: |
Fri, 19 Aug 2022 11:08:34 -0400 (EDT) |
URL:
<https://savannah.gnu.org/bugs/?62920>
Summary: Memory address error when booting from
LUKS-encrypted /boot
Project: GNU GRUB
Submitter: ljyip
Submitted: Fri 19 Aug 2022 03:08:33 PM UTC
Category: Booting
Severity: Major
Priority: 5 - Normal
Item Group: Software Error
Status: None
Privacy: Public
Assigned to: None
Originator Name: Jason Yip
Originator Email: general@jasonyip1.anonaddy.me
Open/Closed: Open
Release: Git master
Release:
Discussion Lock: Any
Reproducibility: Every Time
Planned Release: None
_______________________________________________________
Follow-up Comments:
-------------------------------------------------------
Date: Fri 19 Aug 2022 03:08:33 PM UTC By: Jason Yip <ljyip>
I have a LUKS2-encrypted /boot using PBKDF2. Commit g2f4430cc0 has always
worked for me. However, commit g0c6c1aff2 would do the following: boot into
linux-zen then return an error about access memory address.
My setup:
Arch Linux
/dev/nvme0n1p1 -> unencrypted EFI partition
/dev/nvme0n1p2 -> LUKS-encrypted /boot partition using PBKDF2
/dev/nvme0n1p3 -> LUKS-encrypted LVM using Argon2ID (I include keyfile inside
initramdisk that automatically unlocks this partition)
I install GRUB the way outlined at
[https://wiki.archlinux.org/title/GRUB#LUKS2].
My grub-pre.cfg:
set crypto_uuid=<PARTITION UUID>
cryptomount -u $crypto_uuid
set root=crypto0
set prefix=($root)/grub
insmod normal
normal
I run this script to install GRUB:
#!/bin/sh
grub-mkimage -p /boot/grub -O x86_64-efi -c grub-pre.cfg -o /tmp/grubx64.efi
luks2 part_gpt cryptodisk gcry_rijndael pbkdf2 gcry_sha256 btrfs
install -v /tmp/grubx64.efi /boot/efi/EFI/GRUB/grubx64.efi
My /etc/default/grub:
# GRUB boot loader configuration
GRUB_DEFAULT=0
GRUB_TIMEOUT=3
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 resume=/dev/vg/swap"
GRUB_CMDLINE_LINUX="cryptdevice=PARTLABEL=lvm:cryptlvm
cryptkey=rootfs:/etc/keys/cryptlvm.keyfile"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable booting from LUKS encrypted devices
GRUB_ENABLE_CRYPTODISK=y
# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1920x1080x32
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
GRUB_THEME="/boot/grub/themes/Cyberpunk/theme.txt"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT=true
# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y
# Probing for other operating systems is disabled for security reasons. Read
# documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this
# functionality install os-prober and uncomment to detect and include other
# operating systems.
#GRUB_DISABLE_OS_PROBER=false
My /etc/mkinitcpio.conf:
MODULES=(usbhid xhci_hcd i915)
BINARIES=(btrfs)
FILES=(/etc/keys/cryptlvm.keyfile)
MODULES=(usbhid xhci_hcd i915)
BINARIES=(btrfs)
HOOKS=(base udev autodetect keyboard keymap consolefont modconf block encrypt
lvm2 filesystems resume fsck)
_______________________________________________________
Reply to this item at:
<https://savannah.gnu.org/bugs/?62920>
_______________________________________________
Message sent via Savannah
https://savannah.gnu.org/
- [bug #62920] Memory address error when booting from LUKS-encrypted /boot,
Jason Yip <=