bug-xnee
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Bug-xnee] Problems Compiling Xnee v3.03


From: Henrik Sandklef
Subject: Re: [Bug-xnee] Problems Compiling Xnee v3.03
Date: Wed, 12 May 2010 15:31:44 +0200
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100423 Thunderbird/3.0.4

Can you try the latest release and get back with feedback.

http://itupw056.itu.chalmers.se/xnee/nightly-dists/

On 06/03/2009 06:50 PM, Han Loo wrote:
Thanks for your previous response.

With the latest dist (20090530) I am still unable to build xnee.

My installation procedure is the same as detailed in my last email. I
have also attached all of the output (stdout & stderr from each
respective command) to this response although I suspect the relevant
output (from make-xnee-cvs-20090530.out)) is specifically:

gcc -I../include -I/include -g -g -O2 -shared -o libtest libtest.o
-L/home/hloo/Desktop/INBOX/xnee-latest/xnee-cvs-20090530/libxnee/src/.libs
-L/src
/home/hloo/Desktop/INBOX/xnee-latest/xnee-cvs-20090530/libxnee/src/.libs/libxnee.a
-lX11 -lXtst
/usr/bin/ld: libtest.o: relocation R_X86_64_32 against `a local symbol'
can not be used when making a shared object; recompile with -fPIC
libtest.o: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[3]: *** [libtest] Error 1

Is there an option that I need to specify in the makefile... is this
problem specific to my version of Ubuntu (8.10, AMD64)?

Thanks!
Han

On Sat, May 23, 2009 at 2:31 AM, Henrik Sandklef <address@hidden
<mailto:address@hidden>> wrote:

    hi

    Change the line libxnee/src/feedback.c line 273 to:


       va_list ap;


    It's done (now) in CVS. A nightly dist (with some other fixes) will
    be available in a couple of hours here:

    http://itupw056.itu.chalmers.se/xnee/nightly-dists/


    /h

    Han Loo wrote:

        Greetings,

        I am attempting to build the latest release of xnee (v3.03) on
        an AMD64 X2
        4600+ processor running Ubuntu v8.10.

        I was previously able to successfully install xnee v3.02 by
        executing the
        following commands as per the installation instructions & readme's:
        *
        ./configure --enable-gnome-applet --prefix=/usr
        make
        sudo make install*

        ... and I was also able to uninstall v3.02 using:

        *sudo make uninstall*

        I uninstalled v3.02 in order to update to v3.03 however when I
        attempt to
        install this latest version using the same sequence of commands
        (as I used
        for the previous version) I get the following configuration:
        *
        Configuration of Xnee finished
          ==============================
            PACKAGE              xnee
            VERSION              3.03

           Xnee Developer flags
           -------------------------------------
            VERBOSE_FLAG         -DUSE_VERBOSE
            GCOV_FLAG
            GPROF_FLAG
            BUF_VERBOSE_FLAG     -DNO_BUF_VERBOSE
            PEDANTIC_FLAGS
            LIBDL
            LIBSEMA              -lpthread
            X11_LIBS             -lX11 -lXtst
            PANEL_SERVER_DIR     ${exec_prefix}/lib/bonobo/servers
            PANEL_APPLET_DIR     ${exec_prefix}/lib/gnome-panel
            PIXMAP_DIR           pixmap
            CONVERT


           Building the following components
           -------------------------------------

                cli
                gnee
                pnee
           Excluding the following components
           -------------------------------------

                doc (docs are already included in dist file)

           Static or dynamic linking for programs (true)
           -------------------------------------
                static

           Settings ok?*


        ...and when I attempt a "make" I run into compilation problems.
        *
        make  all-recursive
        make[1]: Entering directory `/home/hloo/Desktop/INBOX/xnee-3.03'
        Making all in libxnee
        make[2]: Entering directory
        `/home/hloo/Desktop/INBOX/xnee-3.03/libxnee'
        Making all in src
        make[3]: Entering directory
        `/home/hloo/Desktop/INBOX/xnee-3.03/libxnee/src'
        /bin/bash ../../libtool --tag=CC   --mode=compile gcc
        -DHAVE_CONFIG_H -I.
        -I../..    -I../include   -g -DUSE_VERBOSE   -DNO_BUF_VERBOSE
          -DHAVE_XOSD
        -g -O2 -MT feedback.lo -MD -MP -MF .deps/feedback.Tpo -c -o
        feedback.lo
        feedback.c
          gcc -DHAVE_CONFIG_H -I. -I../.. -I../include -g -DUSE_VERBOSE
        -DNO_BUF_VERBOSE -DHAVE_XOSD -g -O2 -MT feedback.lo -MD -MP -MF
        .deps/feedback.Tpo -c feedback.c  -fPIC -DPIC -o .libs/feedback.o
        feedback.c: In function ‘feedback’:
        feedback.c:273: error: invalid initializer
        make[3]: *** [feedback.lo] Error 1
        make[3]: Leaving directory
        `/home/hloo/Desktop/INBOX/xnee-3.03/libxnee/src'
        make[2]: *** [all-recursive] Error 1
        make[2]: Leaving directory
        `/home/hloo/Desktop/INBOX/xnee-3.03/libxnee'
        make[1]: *** [all-recursive] Error 1
        make[1]: Leaving directory `/home/hloo/Desktop/INBOX/xnee-3.03'
        make: *** [all] Error 2*

        ...and thus cannot successfully execute a "sudo make install".

        Any help would be much appreciated...

        Thanks!



        ------------------------------------------------------------------------

        _______________________________________________
        Bug-xnee mailing list
        address@hidden <mailto:address@hidden>
        http://lists.gnu.org/mailman/listinfo/bug-xnee





_______________________________________________
Bug-xnee mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/bug-xnee




reply via email to

[Prev in Thread] Current Thread [Next in Thread]