[Commit-gnuradio] r9591 - in gnuradio/trunk/usrp2/fpga/top: u2_core u2_rev3

[matt]

Author: matt
Date: 2008-09-16 18:15:10 -0600 (Tue, 16 Sep 2008)
New Revision: 9591

Modified:
   gnuradio/trunk/usrp2/fpga/top/u2_core/u2_core.v
   gnuradio/trunk/usrp2/fpga/top/u2_rev3/u2_rev3.v
Log:
allow fpga to take over sd card interface from cpld


Modified: gnuradio/trunk/usrp2/fpga/top/u2_core/u2_core.v
===================================================================
--- gnuradio/trunk/usrp2/fpga/top/u2_core/u2_core.v     2008-09-17 00:14:48 UTC 
(rev 9590)
+++ gnuradio/trunk/usrp2/fpga/top/u2_core/u2_core.v     2008-09-17 00:15:10 UTC 
(rev 9591)
@@ -67,7 +67,7 @@
    input cpld_din,
    input cpld_clk,
    input cpld_detached,
-   input cpld_misc,
+   output cpld_misc,
    input cpld_init_b,
    input por,
    output config_success,
@@ -224,7 +224,22 @@
                           .ram_loader_done_i(ram_loader_done));
 
    assign       config_success = ram_loader_done;
+   reg                  takeover = 0;
+
+   wire         cpld_start_int, cpld_mode_int, cpld_done_int;
    
+   always @(posedge wb_clk)
+     if(ram_loader_done)
+       takeover = 1;
+   assign       cpld_misc = ~takeover;
+
+   wire         sd_clk, sd_csn, sd_mosi, sd_miso;
+   
+   assign       sd_miso = cpld_din;
+   assign       cpld_start = takeover ? sd_clk : cpld_start_int;
+   assign       cpld_mode = takeover ? sd_csn : cpld_mode_int;
+   assign       cpld_done = takeover ? sd_mosi : cpld_done_int;
+   
    // ///////////////////////////////////////////////////////////////////
    // RAM Loader
 
@@ -238,9 +253,9 @@
                 // CPLD Interface
                 .cfg_clk_i(cpld_clk),
                 .cfg_data_i(cpld_din),
-                .start_o(cpld_start),
-                .mode_o(cpld_mode),
-                .done_o(cpld_done),
+                .start_o(cpld_start_int),
+                .mode_o(cpld_mode_int),
+                .done_o(cpld_done_int),
                 .detached_i(cpld_detached),
                 // Wishbone Interface
                 .wb_dat_o(ram_loader_dat),.wb_adr_o(ram_loader_adr),
@@ -697,10 +712,15 @@
    assign      debug_gpio_0 = 0; //debug_serdes0;
    assign      debug_gpio_1 = 0; //debug_serdes1;
 
-   assign      debug={{3'b0, wb_clk, wb_rst, dsp_rst, por, config_success},
-                     {8'b0},
-                     {3'b0,ram_loader_ack, ram_loader_stb, 
ram_loader_we,ram_loader_rst,ram_loader_done },
-                     
{cpld_start,cpld_mode,cpld_done,cpld_din,cpld_clk,cpld_detached,cpld_misc,cpld_init_b}
 };
+//   assign      debug={{3'b0, wb_clk, wb_rst, dsp_rst, por, config_success},
+       //            {8'b0},
+               //      {3'b0,ram_loader_ack, ram_loader_stb, 
ram_loader_we,ram_loader_rst,ram_loader_done },
+                 //    
{cpld_start,cpld_mode,cpld_done,cpld_din,cpld_clk,cpld_detached,cpld_misc,cpld_init_b}
 };
 
    //assign      debug = {dac_a,dac_b};
+
+   assign      debug = {{ram_loader_done, takeover, 6'd0},
+                       {1'b0, cpld_start_int, cpld_mode_int, cpld_done_int, 
sd_clk, sd_csn, sd_miso, sd_mosi},
+                       {8'd0},
+                       {cpld_start, cpld_mode, cpld_done, cpld_din, cpld_misc, 
cpld_detached, cpld_clk, cpld_init_b}};
 endmodule // u2_core

Modified: gnuradio/trunk/usrp2/fpga/top/u2_rev3/u2_rev3.v
===================================================================
--- gnuradio/trunk/usrp2/fpga/top/u2_rev3/u2_rev3.v     2008-09-17 00:14:48 UTC 
(rev 9590)
+++ gnuradio/trunk/usrp2/fpga/top/u2_rev3/u2_rev3.v     2008-09-17 00:15:10 UTC 
(rev 9591)
@@ -75,7 +75,7 @@
    input cpld_clk,     // AB14 serial clock
    input cpld_detached,// V11 unused
    output cpld_init_b,  // W12 unused dual purpose
-   input cpld_misc,  // Y12 unused
+   output cpld_misc,  // Y12 
 
    // Watchdog interface
    input POR,