Archives are refreshed every 30 minutes - for details, please visit the main index.
You can also download the archives in mbox format.

discuss-gnuradio (date)

[Thread Index][Top][All Lists]

Advanced

[Prev Period]

Last Modified: Mon Jan 31 2011 20:02:00 -0500 Messages in reverse chronological order

[Next Period]

---

• January 31, 2011
  • Re: [Discuss-gnuradio] Increasing ALSA Sampling Rate, Marcus D. Leech, 20:02
  • Re: [Discuss-gnuradio] Increasing ALSA Sampling Rate, George S. Williams, 19:29
  • [Discuss-gnuradio] Frequency & time offset problem at low SNR region, Minsuk Kang, 17:41
  • Re: [Discuss-gnuradio] Increasing ALSA Sampling Rate, Marcus D. Leech, 16:25
  • Re: [Discuss-gnuradio] Increasing ALSA Sampling Rate, Tom Rondeau, 14:46
  • Re: [Discuss-gnuradio] USRP2 transmission issues, Matt Ettus, 14:01
  • Re: [Discuss-gnuradio] USRP E100 problem installing python-lxml, Ben Hilburn, 13:44
  • Re: [Discuss-gnuradio] N210 firmware, Marcus D. Leech, 13:25
  • Re: [Discuss-gnuradio] N210 firmware, Nick Foster, 13:20
  • Re: [Discuss-gnuradio] Increasing ALSA Sampling Rate, George S. Williams, 13:11
  • [Discuss-gnuradio] N210 firmware, Philip Apus, 12:49
  • Re: [Discuss-gnuradio] USRP2 transmission issues, Marcus D. Leech, 12:16
  • Re: [Discuss-gnuradio] USRP2 transmission issues, Ed Criscuolo, 12:10
  • Re: [Discuss-gnuradio] USRP2 transmission issues, nyquist82, 11:51
  • [Discuss-gnuradio] USRP E100 problem installing python-lxml, Achilleas Anastasopoulos, 11:47
  • Re: [Discuss-gnuradio] Increasing ALSA Sampling Rate, Tom Rondeau, 10:31
  • Re: [Discuss-gnuradio] USRP2 transmission issues, Marcus D. Leech, 10:28
  • Re: [Discuss-gnuradio] USRP2 transmission issues, nyquist82, 09:35
• January 30, 2011
  • [Discuss-gnuradio] why in low_pass cutoff_freq is CENTER of transition band whereas in low_pass_2 cutoff_freq is BEGINNING of transition band, James Jordan, 22:23
  • Re: [Discuss-gnuradio] question about xlating filter and resample filter, James Jordan, 22:13
  • Re: [Discuss-gnuradio] Is it possible to make sub-micro seconds level timing control?, Josh Blum, 17:22
  • [Discuss-gnuradio] Is it possible to make sub-micro seconds level timing control?, Sangho Oh, 16:56
  • Re: [Discuss-gnuradio] TPB Scheduler - Block Scheduling Rate, Ben Hilburn, 14:50
  • Re: [Discuss-gnuradio] question about xlating filter and resample filter, Tom Rondeau, 12:27
• January 29, 2011
  • [Discuss-gnuradio] question about xlating filter and resample filter, James Jordan, 22:23
  • Re: [Discuss-gnuradio] UHD graph for simple FFT, Marcus D. Leech, 22:13
  • Re: [Discuss-gnuradio] UHD graph for simple FFT, Nick Othieno, 22:09
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Patrik Tast, 17:19
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Marcus D. Leech, 13:44
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Jeff Kelly, 13:40
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Marcus D. Leech, 13:00
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Marcus D. Leech, 12:52
  • Re: [Discuss-gnuradio] LD_LIBRARY_PATH root question, Patrik Tast, 11:15
  • Re: [Discuss-gnuradio] LD_LIBRARY_PATH root question, Tom Rondeau, 10:28
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Marcus D. Leech, 10:24
  • Re: [Discuss-gnuradio] Spectrum distortion in wideband OFDM samples, Per Zetterberg, 06:02
  • RE: [Discuss-gnuradio] Spectrum distortion in wideband OFDM samples, Per Zetterberg, 04:59
• January 28, 2011
  • Re: [Discuss-gnuradio] TPB Scheduler - Block Scheduling Rate, Michael Dickens, 22:08
  • Re: [Discuss-gnuradio] TI vs Freescale DSP for open-source development, Jeff Brower, 18:50
  • Re: [Discuss-gnuradio] SDR Radio Telescope Receiver, Marcus D. Leech, 18:41
  • Re: [Discuss-gnuradio] TI vs Freescale DSP for open-source development, Don Latham, 18:35
  • Re: [Discuss-gnuradio] Spectrum distortion in wideband OFDM samples, Matt Ettus, 18:10
  • Re: [Discuss-gnuradio] Spectrum distortion in wideband OFDM samples, Per Zetterberg, 17:44
  • [Discuss-gnuradio] SDR Radio Telescope Receiver, Phil Behnke, 17:11
  • Re: [Discuss-gnuradio] TI vs Freescale DSP for open-source development, Jeff Brower, 16:53
  • Re: [Discuss-gnuradio] USRP2 transmission issues, Matt Ettus, 16:36
  • [Discuss-gnuradio] UHD graph for simple FFT, Marcus D. Leech, 16:36
  • [Discuss-gnuradio] Quick-and-dirty GNU Radio (Geeko powered!), Gregor Dschung, 16:22
  • Re: [Discuss-gnuradio] TPB Scheduler - Block Scheduling Rate, Ben Hilburn, 14:23
  • Re: [Discuss-gnuradio] TPB Scheduler - Block Scheduling Rate, Marcus D. Leech, 13:59
  • Re: [Discuss-gnuradio] TPB Scheduler - Block Scheduling Rate, Almohanad Fayez, 13:16
  • Re: [Discuss-gnuradio] TI vs Freescale DSP for open-source development, Almohanad Fayez, 12:59
  • [Discuss-gnuradio] Details on the initialization sequence, Gabriel Morel, 11:12
  • [Discuss-gnuradio] Question about an OFDM-USRP2 decoder, Juan Ramon Gutierrez, 11:10
  • Re: [Discuss-gnuradio] TI vs Freescale DSP for open-source development, Brian Padalino, 11:08
  • [Discuss-gnuradio] TI vs Freescale DSP for open-source development, Alexander Chemeris, 10:23
  • Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Miok Wah, 09:43
  • Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Philip Balister, 09:11
  • [Discuss-gnuradio] LD_LIBRARY_PATH root question, Patrik Tast, 08:42
  • [Discuss-gnuradio] TPB Scheduler - Block Scheduling Rate, Ben Hilburn, 04:15
  • [Discuss-gnuradio] Receiving 2 separate frequencies on same daughterboard RFX2400, Arya Santini, 03:22
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, Erik Darzins, 03:15
  • [Discuss-gnuradio] Compiling GNURadio on openembedded for USRP E100., Miok Wah, 02:55
  • [Discuss-gnuradio] FPGA Security, Justin Kelly, 02:11
  • [Discuss-gnuradio] Spectrum distortion in wideband OFDM samples, Sangho Oh, 02:09
  • Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Marcus D. Leech, 02:00
• January 27, 2011
  • Re:Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Ming Wah, 14:19
  • Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Ben Hilburn, 14:06
  • Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Miok Wah, 13:52
  • Re: [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Ben Hilburn, 13:39
  • [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Miok Wah, 13:37
  • [Discuss-gnuradio] USRP E100 login: Ethernet and USB?, Miok Wah, 13:34
  • Re: [Discuss-gnuradio] UHD Interface - Difference between num samps rx, Josh Blum, 13:08
  • Re: [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Isaac Gerg, 11:48
  • [Discuss-gnuradio] Increasing ALSA Sampling Rate, George S. Williams, 11:38
  • Re: [Discuss-gnuradio] Re: Changing quantization levels in USRP2, Tom Rondeau, 11:24
  • Re: [Discuss-gnuradio] Re: Changing quantization levels in USRP2, Nick Othieno, 11:16
  • [Discuss-gnuradio] UHD Simultaneous tx/rx Loopback Problem, Isaac Gerg, 11:08
  • Re: [Discuss-gnuradio] Re: Changing quantization levels in USRP2, Tom Rondeau, 10:49
  • Re: [Discuss-gnuradio] TETRA ?, Farhad Abdolian, 10:29
  • Re: [Discuss-gnuradio] Windows status, Pol Henarejos, 10:29
  • [Discuss-gnuradio] Re: Changing quantization levels in USRP2, Nick Othieno, 10:22
  • [Discuss-gnuradio] UND's Radioware ..., Michael Dickens, 10:18
  • [Discuss-gnuradio] UHD Interface - Difference between num samps rx, Isaac Gerg, 10:11
  • Re: [Discuss-gnuradio] Windows status, Don Ward, 09:53
  • [Discuss-gnuradio] USRP2 transmission issues, nyquist82, 06:44
  • [Discuss-gnuradio] TETRA ?, Farhad Abdolian, 05:57
  • [Discuss-gnuradio] Available GNU Radio DSP support for TI OMAP (e.g. Beagleboard & USRP E100), Almohanad Fayez, 04:29
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, update lee, 00:22
• January 26, 2011
  • Re: [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Josh Blum, 23:35
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, Josh Blum, 23:15
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, update lee, 23:06
  • Re: [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Isaac Gerg, 22:35
  • Re: [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Josh Blum, 22:10
  • Re: [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Isaac Gerg, 21:59
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, Josh Blum, 20:07
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, update lee, 19:50
  • Re: [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Josh Blum, 19:00
  • [Discuss-gnuradio] Using UHD, trying to tx and rx samples simultaneously, Isaac Gerg, 18:03
  • [Discuss-gnuradio] Re: Using UHD with one USRP and trying to verify that Im sending data, Isaac Gerg, 16:55
  • Re: [Discuss-gnuradio] Trying to use gnuradio-companion, Charles Brain, 15:27
  • Re: [Discuss-gnuradio] Trying to use gnuradio-companion, Marcus D. Leech, 14:48
  • Re: [Discuss-gnuradio] OSX gnuradio/uhd issue, Josh Blum, 14:46
  • [Discuss-gnuradio] Changing quantization levels in USRP2, Nick Othieno, 14:40
  • Re: [Discuss-gnuradio] Trying to use gnuradio-companion, Josh Blum, 14:12
  • [Discuss-gnuradio] Trying to use gnuradio-companion, Charles Brain, 14:08
  • [Discuss-gnuradio] OSX gnuradio/uhd issue, update lee, 09:05
  • [Discuss-gnuradio] Issues concerning the FPGA programming, Eduardo Lloret Fuentes, 04:34
• January 25, 2011
  • Re: [Discuss-gnuradio] USRP drivers vs UHD drivers in gnuradio-companion, Josh Blum, 22:42
  • Re: [Discuss-gnuradio] USRP drivers vs UHD drivers in gnuradio-companion, Marcus D. Leech, 22:41
  • Re: [Discuss-gnuradio] USRP drivers vs UHD drivers in gnuradio-companion, Achilleas Anastasopoulos, 22:30
  • [Discuss-gnuradio] Windows status, Marcus D. Leech, 21:38
  • Re: [Discuss-gnuradio] USRP drivers vs UHD drivers in gnuradio-companion, Marcus D. Leech, 20:46
  • [Discuss-gnuradio] USRP drivers vs UHD drivers in gnuradio-companion, Achilleas Anastasopoulos, 20:42
  • Re: [Discuss-gnuradio] Using UHD with one USRP and trying to verify that Im sending data, Marcus D. Leech, 20:23
  • Re: [Discuss-gnuradio] Using UHD with one USRP and trying to verify that Im sending data, Josh Blum, 20:22
  • Re: [Discuss-gnuradio] Using UHD with one USRP and trying to verify that Im sending data, Isaac Gerg, 20:11
  • Re: [Discuss-gnuradio] Re: FM stereo problem, Bernardo Gonçalves, 19:58
  • [Discuss-gnuradio] Re: FM stereo problem, Patrick Strasser, 19:25
  • Re: [Discuss-gnuradio] Using UHD with one USRP and trying to verify that Im sending data, Josh Blum, 19:00
  • Re: [Discuss-gnuradio] Using UHD with one USRP and trying to verify that Im sending data, John Orlando, 18:59
  • [Discuss-gnuradio] Using UHD with one USRP and trying to verify that Im sending data, Isaac Gerg, 18:53
  • [Discuss-gnuradio] Where is the gain control in cmu_macs?, David Knox, 16:21
  • [Discuss-gnuradio] Re: FM stereo problem, Patrick Strasser, 10:55
  • [Discuss-gnuradio] SPAN code - receiving data frame, senthil murugan, 06:13
  • [Discuss-gnuradio] FM stereo problem, Bernardo Gonçalves, 04:15
• January 24, 2011
  • Re: [Discuss-gnuradio] problems installing UHD on USRPE100, Josh Blum, 17:43
  • Re: [Discuss-gnuradio] FPGA usage in USRP E100, Alexander Chemeris, 16:38
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Miok Wah, 16:17
  • [Discuss-gnuradio] USRP with 100MBit card, Marcin Szelest SQ9DJJ, 14:24
  • Re: [Discuss-gnuradio] problems installing UHD + USRP1, Josh Blum, 14:10
  • Re: [Discuss-gnuradio] FPGA usage in USRP E100, Matt Ettus, 13:42
  • [Discuss-gnuradio] problems installing UHD + USRP1, Achilleas Anastasopoulos, 13:31
  • [Discuss-gnuradio] FPGA usage in USRP E100, Alexander Chemeris, 13:31
  • [Discuss-gnuradio] 'Failed to automatically setup a usrp device' running benchmark_{rx/tx}.py, Lebowski80, 11:56
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Alexandru Csete, 11:37
  • RE: [Discuss-gnuradio] problem building next branch, Ulrika Uppman, 10:44
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Fabian Klaes, 10:41
  • [Discuss-gnuradio] problems installing UHD on USRPE100, Achilleas Anastasopoulos, 10:39
  • [Discuss-gnuradio] USRP2 with strange RX behavior (ADC damaged?), BENOIT Clément, 10:29
  • Re: [Discuss-gnuradio] problem building next branch, Tom Rondeau, 09:49
  • [Discuss-gnuradio] problem building next branch, Ulrika Uppman, 07:02
  • Re: [Discuss-gnuradio] Questions on the new UbuntuInstall wiki-site, Fabian Klaes, 06:56
  • Re: [Discuss-gnuradio] Questions on the new UbuntuInstall wiki-site, Alexandru Csete, 06:33
  • [Discuss-gnuradio] Questions on the new UbuntuInstall wiki-site, Fabian Klaes, 05:35
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Euripedes Rocha Filho, 05:01
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Martin Braun, 04:24
  • [Discuss-gnuradio] receiving data from two rx boards on USRP simultaneously, randall . wayth, 04:00
  • Re: [Discuss-gnuradio] Problems creating my own GRC blocks, Martin Braun, 03:38
  • Re: [Discuss-gnuradio] hi all, can I use one RX receive a wideband signal and then seperate it to many narrowband signals, James Jordan, 01:38
  • Re: [Discuss-gnuradio] Run problems with latest UHD build, john, 00:26
• January 23, 2011
  • Re: [Discuss-gnuradio] Run problems with latest UHD build, Josh Blum, 17:55
  • Re: [Discuss-gnuradio] Run problems with latest UHD build, john, 17:50
  • Re: [Discuss-gnuradio] Problems creating my own GRC blocks, Iain Young, G7III, 15:20
  • Re: [Discuss-gnuradio] Problems creating my own GRC blocks, Josh Blum, 14:46
  • Re: [Discuss-gnuradio] Number of TX/RX channels on a USRP, Arya Santini, 13:42
  • [Discuss-gnuradio] Problems creating my own GRC blocks, Iain Young, G7III, 08:09
  • Re: [Discuss-gnuradio] Number of TX/RX channels on a USRP, Alexandru Csete, 06:03
  • Re: [Discuss-gnuradio] Run problems with latest UHD build, Alexandru Csete, 05:43
  • [Discuss-gnuradio] Run problems with latest UHD build, john, 02:12
• January 22, 2011
  • [Discuss-gnuradio] Number of TX/RX channels on a USRP, Arya Santini, 20:56
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Steve Mcmahon, 17:59
  • Re: [Discuss-gnuradio] GNU Radio Conference, Patrik Tast, 16:03
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Patrik Tast, 15:58
  • Re: [Discuss-gnuradio] GNU Radio Conference, Alexandru Csete, 15:18
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Patrik Tast, 14:42
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Alexandru Csete, 14:28
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Sanjay Singh, 14:13
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Marcus D. Leech, 13:54
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Philip Heron, 13:52
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Sanjay Singh, 13:47
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Patrik Tast, 13:36
  • Re: [Discuss-gnuradio] GNU Radio Conference, Douglas Geiger, 12:54
  • Re: [Discuss-gnuradio] some question about channelizer, Tom Rondeau, 12:06
  • Re: [Discuss-gnuradio] hi all, can I use one RX receive a wideband signal and then seperate it to many narrowband signals, Tom Rondeau, 12:04
  • Re: [Discuss-gnuradio] GNU Radio Conference, Tom Rondeau, 11:55
  • Re: [Discuss-gnuradio] GNU Radio Conference, Tom Rondeau, 11:45
  • Re: [Discuss-gnuradio] USRP design is free, Moeller, 07:13
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Moeller, 06:22
  • Re: [Discuss-gnuradio] USRP design is free, John Gilmore, 05:19
  • Re: [Discuss-gnuradio] USRP2 + UHD MIMO implementation, Josh Blum, 00:24
• January 21, 2011
  • [Discuss-gnuradio] USRP2 + UHD MIMO implementation, Yong J. Chang, 21:42
  • Re: [Discuss-gnuradio] GNU Radio Conference, Jago Pearce, 20:33
  • Re: [Discuss-gnuradio] Unrecognized exception in gr-uhd, Alexandru Csete, 19:59
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Josh Blum, 19:35
  • Re: [Discuss-gnuradio] Unrecognized exception in gr-uhd, Josh Blum, 19:29
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Fabian Klaes, 19:21
  • Re: [Discuss-gnuradio] Unrecognized exception in gr-uhd, Alexandru Csete, 18:49
  • Re: [Discuss-gnuradio] Unrecognized exception in gr-uhd, Josh Blum, 18:45
  • [Discuss-gnuradio] Unrecognized exception in gr-uhd, Alexandru Csete, 18:38
  • [Discuss-gnuradio] Timestamp Error on Receive, Thomas Tsou, 18:16
  • [Discuss-gnuradio] Xilinx SP-605 board with Bitshark FMC-1RX, Elvis Dowson, 15:41
  • [Discuss-gnuradio] Open Hardware development Initiative for Software Radios., Justin Kelly, 15:27
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Sanjay Singh, 15:04
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Marcus D. Leech, 14:46
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Sanjay Singh, 14:44
  • Re: [Discuss-gnuradio] GNU Radio Conference, Ben Hilburn, 14:36
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Ben Hilburn, 14:27
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Patrik Tast, 14:22
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Sanjay Singh, 14:15
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Marcus D. Leech, 14:07
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Patrik Tast, 13:55
  • Re: [Discuss-gnuradio] Who actually *does* use GNU Radio?, Mark J. Blair, 13:44
  • Re: [Discuss-gnuradio] GNU Radio Conference, Scott Johnston, 13:12
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Josh Blum, 13:09
  • Re: [Discuss-gnuradio] How to run gnuradio application with a file input and no physical receiver?, Howard Wong, 13:01
  • Re: [Discuss-gnuradio] GNU Radio Conference, Tom Rondeau, 13:00
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Josh Blum, 12:56
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Fabian Klaes, 12:49
  • [Discuss-gnuradio] Who actually *does* use GNU Radio?, Ed Criscuolo, 12:05
  • Re: [Discuss-gnuradio] help: in finding ebook - by corby, Patrick Yeon, 11:25
  • [Discuss-gnuradio] Discussing GNU Radio's Future, Tom Rondeau, 11:20
  • [Discuss-gnuradio] GNU Radio's Direction, Tom Rondeau, 11:20
  • [Discuss-gnuradio] GNU Radio Conference, Tom Rondeau, 11:19
  • [Discuss-gnuradio] About the list, Tom Rondeau, 11:18
  • Re: [Discuss-gnuradio] first session on a USRP E100, Philip Balister, 10:11
  • Re: [Discuss-gnuradio] constellation object, Ben Reynwar, 10:01
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Rafael Diniz, 09:44
  • Re: [Discuss-gnuradio] first session on a USRP E100, Jason Abele, 09:41
  • [Discuss-gnuradio] first session on a USRP E100, Achilleas Anastasopoulos, 09:29
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Marcus D. Leech, 09:03
  • Re: [Discuss-gnuradio] Cygwin, open cfile using c, complex.h, Martin Braun, 08:56
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Alexandru Csete, 08:54
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Alexandru Csete, 08:54
  • [Discuss-gnuradio] help: in finding ebook - by corby, ton ph, 08:52
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Fabian Klaes, 08:02
  • [Discuss-gnuradio] Cygwin, open cfile using c, complex.h, Howard Wong, 07:02
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Jens Elsner, 04:43
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Martin Braun, 04:19
  • Re: [Discuss-gnuradio] constellation object, Martin Braun, 03:31
  • [Discuss-gnuradio] How to solve the error of bert in /digital-bert/, Hanjin Park, 02:12
  • Re: [Discuss-gnuradio] Showing a time-varying quantity in GNU Radio (with qtgui), Minsuk Kang, 01:20
• January 20, 2011
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Marcus D. Leech, 22:35
  • Re: [Discuss-gnuradio] hi all, can I use one RX receive a wideband signal and then seperate it to many narrowband signals, Marcus D. Leech, 22:30
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, James Jordan, 22:28
  • Re: [Discuss-gnuradio] hi all, can I use one RX receive a wideband signal and then seperate it to many narrowband signals, James Jordan, 22:23
  • Re: [Discuss-gnuradio] hi all, can I use one RX receive a wideband signal and then seperate it to many narrowband signals, Marcus D. Leech, 22:11
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Sanjay Singh, 21:50
  • Re: [Discuss-gnuradio] hi all, can I use one RX receive a wideband signal and then seperate it to many narrowband signals, James Jordan, 21:42
  • Re: [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Alexandru Csete, 20:35
  • [Discuss-gnuradio] NanoSail-D turns out isn't lost!, Marcus D. Leech, 20:10
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Moeller, 18:29
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Moeller, 17:06
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Elvis Dowson, 15:56
  • Re: [Discuss-gnuradio] constellation object, Ben Reynwar, 15:53
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Josh Blum, 15:40
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Marcus D. Leech, 15:34
  • Re: [Discuss-gnuradio] WBX - only real signal after some time, Ruben Undheim, 14:57
  • Re: [Discuss-gnuradio] E100 Suitability for Space Applications, Matt Ettus, 14:56
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Sanjay Singh, 14:10
  • Re: [Discuss-gnuradio] filename using time-stamp in GRC, ematlis, 13:59
  • Re: [Discuss-gnuradio] GNURadio is disappointing [was: Greeting and a question], Brian Padalino, 13:52
  • Re: [Discuss-gnuradio] Unwanted signal transmitted RFX900, Nick Foster, 13:09
  • Re: [Discuss-gnuradio] filename using time-stamp in GRC, Alexandru Csete, 12:41
  • Re: [Discuss-gnuradio] WBX - only real signal after some time, Marcus D. Leech, 12:27
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Marcus D. Leech, 11:44
  • Re: [Discuss-gnuradio] filename using time-stamp in GRC, ematlis, 11:41
  • [Discuss-gnuradio] WBX - only real signal after some time, Ruben Undheim, 11:40
  • Re: [Discuss-gnuradio] filename using time-stamp in GRC, Josh Blum, 11:16
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Josh Blum, 11:13
  • Re: [Discuss-gnuradio] Greeting and a question, Sanjay Singh, 11:12
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Euripedes Rocha Filho, 10:50
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Fabian Klaes, 10:21
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, William Cox, 10:16
  • Re: [Discuss-gnuradio] Help : Can we use the c++ part of the gnuradio only., Tom Rondeau, 09:22
  • Re: [Discuss-gnuradio] UHD won't work with GRC, Alexandru Csete, 09:12
  • [Discuss-gnuradio] UHD won't work with GRC, Fabian Klaes, 08:51
  • [Discuss-gnuradio] Unwanted signal transmitted RFX900, Paco Quiñoy, 06:48
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Mark Steward, 06:05
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Euripedes Rocha Filho, 03:52
  • Re: [Discuss-gnuradio] constellation object, Martin Braun, 03:46
  • Re: [Discuss-gnuradio] Mail with picture, Moritz Fischer, 03:45
  • Re: [Discuss-gnuradio] UHD Announcement - January 20th 2011, Moritz Fischer, 03:40
  • [Discuss-gnuradio] UHD Announcement - January 20th 2011, Josh Blum, 03:05
  • [Discuss-gnuradio] Help : Can we use the c++ part of the gnuradio only., ton ph, 02:42
  • Re: [Discuss-gnuradio] USRP2 connection problem, mehmet kabasakal, 01:31
  • Re: [Discuss-gnuradio] UHD transmission timing control is quite tricky yet., Josh Blum, 00:49
  • [Discuss-gnuradio] UHD transmission timing control is quite tricky yet., Sangho Oh, 00:29
• January 19, 2011
  • Re: [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Marcus D. Leech, 23:43
  • [Discuss-gnuradio] some question about channelizer, James Jordan, 22:30
  • [Discuss-gnuradio] MIMO transmitter issues, sandeep ponnuru, 22:05
  • [Discuss-gnuradio] Yet another kick at the cheap-hardware can, Marcus D. Leech, 18:24
  • [Discuss-gnuradio] Mail with picture, Gabriel Morel, 14:02
  • Re: [Discuss-gnuradio] constellation object, Ben Reynwar, 13:55
  • [Discuss-gnuradio] filename using time-stamp in GRC, ematlis, 13:47
  • [Discuss-gnuradio] E100 Suitability for Space Applications, Ed Criscuolo, 10:56
  • Re: [Discuss-gnuradio] Showing a time-varying quantity in GNU Radio (with qtgui), Tom Rondeau, 07:01
  • Re: [Discuss-gnuradio] Greeting and a question, Farhad Abdolian, 04:36
  • Re: [Discuss-gnuradio] Showing a time-varying quantity in GNU Radio (with qtgui), Marcus D. Leech, 01:12
  • [Discuss-gnuradio] Showing a time-varying quantity in GNU Radio (with qtgui), Minsuk Kang, 00:09
• January 18, 2011
  • Re: [Discuss-gnuradio] Synchronize USRP using 5Hz pps, Sangho Oh, 21:52
  • Re: [Discuss-gnuradio] Synchronize USRP using 5Hz pps, Josh Blum, 20:45
  • [Discuss-gnuradio] Synchronize USRP using 5Hz pps, Sangho Oh, 20:37
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, Moeller, 18:15
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNUsolution", Moeller, 17:52
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, JP234, 17:38
  • Re: [Discuss-gnuradio] about RF SMA-M to SMA-M cable, Marcus D. Leech, 16:51
  • Re: [Discuss-gnuradio] Implementation of an I/Q Lab with USRP2, Nick Foster, 13:35
  • [Discuss-gnuradio] Re: Finally compiled USRP2 code works finewithUDPimage ...but not with compiled Raw Ethernet Image, Patrick Strasser, 13:11
  • Re: [Discuss-gnuradio] OFDM on USRP2, Josh Blum, 13:05
  • Re: [Discuss-gnuradio] OFDM on USRP2, Veljko Pejovic, 12:52
  • Re: [Discuss-gnuradio] Re: always a spike on the FFT at the center frequency (Matt Ettus), Charles Alberton Herdt, 10:37
  • Re: [Discuss-gnuradio] constellation object, Tom Rondeau, 10:32
  • Re: [Discuss-gnuradio] OFDM receiver on USRP2, Tom Rondeau, 10:09
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNUsolution", Marcus D. Leech, 09:56
  • Re: [Discuss-gnuradio] about RF SMA-M to SMA-M cable, Alexandru Csete, 08:36
  • [Discuss-gnuradio] about RF SMA-M to SMA-M cable, Songsong Gee, 07:39
  • [Discuss-gnuradio] about RF SMA-M to SMA-M cable, Songsong Gee, 06:19
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNUsolution", Patrik Tast, 06:03
  • [Discuss-gnuradio] Implementation of an I/Q Lab with USRP2, Eduardo Lloret Fuentes, 05:42
• January 17, 2011
  • Re: [Discuss-gnuradio] OFDM receiver on USRP2, Guanbo, 19:58
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNUsolution", Marcus D. Leech, 18:47
  • Re: [Discuss-gnuradio] Re: Finally compiled USRP2 code works finewithUDPimage ...but not with compiled Raw Ethernet Image, Gabriel Morel, 17:40
  • [Discuss-gnuradio] Porting benchmark_tx/rx to UHD for use with E100, Ben Hilburn, 16:49
  • Re: [Discuss-gnuradio] OFDM on USRP2, Tom Rondeau, 16:18
  • [Discuss-gnuradio] video card DAC useful?, Justin Kelly, 15:31
  • Re: [Discuss-gnuradio] How to run gnuradio application with a file input and no physical receiver?, dave k, 15:00
  • Re: [Discuss-gnuradio] OFDM on USRP2, Josh Blum, 14:48
  • [Discuss-gnuradio] Re: Finally compiled USRP2 code works finewithUDPimage ...but not with compiled Raw Ethernet Image, Patrick Strasser, 14:34
  • Re: [Discuss-gnuradio] OFDM on USRP2, Veljko Pejovic, 14:32
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works finewithUDPimage ...but not with compiled Raw Ethernet Image, Gabriel Morel, 13:27
  • Re: [Discuss-gnuradio] Greeting and a question, Tom Rondeau, 12:32
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine withUDPimage ...but not with compiled Raw Ethernet Image, Josh Blum, 12:15
  • Re: [Discuss-gnuradio] Greeting and a question, Farhad Abdolian, 12:11
  • Re: [Discuss-gnuradio] Greeting and a question, Tom Rondeau, 12:04
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine withUDPimage ...but not with compiled Raw Ethernet Image, Gabriel Morel, 10:40
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNUsolution", Jason Uher, 10:23
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNUsolution", Patrik Tast, 09:20
  • Re: [Discuss-gnuradio] constellation object, Ben Reynwar, 00:10
• January 16, 2011
  • Re: [Discuss-gnuradio] DDC and Polyphase Channelizer, Jimmy Richardson, 20:24
  • Re: [Discuss-gnuradio] constellation object, Tom Rondeau, 17:03
  • Re: [Discuss-gnuradio] How to run gnuradio application with a file input and no physical receiver?, Brian Padalino, 15:39
  • [Discuss-gnuradio] How to run gnuradio application with a file input and no physical receiver?, Lee McKusick, 15:25
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNU solution", Moeller, 06:14
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNU solution", Moeller, 05:16
  • Re: [Discuss-gnuradio] Low-cost hardware options, Peter F Bradshaw, 00:38
• January 15, 2011
  • Re: [Discuss-gnuradio] Low-cost hardware options, Brian Padalino, 23:03
  • Re: [Discuss-gnuradio] Low-cost hardware options, John Gilmore, 21:57
  • [Discuss-gnuradio] Re: usrp2::usrp2::rx_samples doesn't recover from hang, Gaetano Mendola, 17:55
  • Re: [Discuss-gnuradio] usrp2 dtor can throw !, Gaetano Mendola, 17:51
  • Re: [Discuss-gnuradio] line codes and FSM/Trellis, Achilleas Anastasopoulos, 17:34
  • Re: [Discuss-gnuradio] volk: duplicate symbol _volk_cpu, Tom Rondeau, 16:33
  • [Discuss-gnuradio] SRAM, Justin Kelly, 15:45
  • Re: [Discuss-gnuradio] usrp2 dtor can throw !, Josh Blum, 14:34
  • Re: [Discuss-gnuradio] Passing a message from one block to other, John Andrews, 13:45
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNU solution", Marcus D. Leech, 10:17
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNU solution", Marcus D. Leech, 09:46
  • Re: [Discuss-gnuradio] Re: Low cost hardware option, Marcus D. Leech, 09:44
  • Re: [Discuss-gnuradio] re: Low cost hardware option, the "total GNU solution", Moeller, 09:39
  • Re: [Discuss-gnuradio] Low-cost hardware options, Marcus D. Leech, 09:35
  • Re: [Discuss-gnuradio] Re: Low cost hardware option, Moeller, 09:14
  • Re: [Discuss-gnuradio] Low-cost hardware options, Marcus D. Leech, 08:53
  • Re: [Discuss-gnuradio] Re: Low cost hardware option, Marcus D. Leech, 08:49
  • [Discuss-gnuradio] Re: Low-cost hardware options, Patrick Strasser, 07:57
  • [Discuss-gnuradio] Re: Low cost hardware option, Patrick Strasser, 07:45
  • [Discuss-gnuradio] line codes and FSM/Trellis, Patrick Strasser, 06:37
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, Moeller, 05:15
  • Re: [Discuss-gnuradio] Low-cost hardware options, Moeller, 05:00
  • Re: [Discuss-gnuradio] Re: Low cost hardware option, Moeller, 04:31
  • Re: [Discuss-gnuradio] carrier sensing, usrp2 & xcvr2450, Stefan Schmid, 03:45
  • [Discuss-gnuradio] constellation object, Ben Reynwar, 01:40
• January 14, 2011
  • [Discuss-gnuradio] Low-cost hardware options, Marcus D. Leech, 21:11
  • Re: [Discuss-gnuradio] carrier sensing, usrp2 & xcvr2450, Matt Ettus, 18:25
  • [Discuss-gnuradio] carrier sensing, usrp2 & xcvr2450, Stefan Schmid, 17:10
  • Re: [Discuss-gnuradio] Re: Low cost hardware option, Marcus D. Leech, 16:56
  • [Discuss-gnuradio] Re: Low cost hardware option, Charly Lima, 16:35
  • Re: [Discuss-gnuradio] grc amplitude demodulation questions, ematlis, 16:30
  • Re: [Discuss-gnuradio] why USRP2 End-Of-Life (EOL) in March 2011? UHD-only?, Matt Ettus, 15:55
  • Re: [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Marcus D. Leech, 15:48
  • Re: [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Marcus D. Leech, 15:46
  • Re: [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Steve Mcmahon, 15:44
  • [Discuss-gnuradio] why USRP2 End-Of-Life (EOL) in March 2011? UHD-only?, Steve Mcmahon, 15:40
  • Re: [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Marcus D. Leech, 15:36
  • Re: [Discuss-gnuradio] OFDM Benchmark Change Modulation, Ben Reynwar, 15:33
  • Re: [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Steve Mcmahon, 15:28
  • Re: [Discuss-gnuradio] transient when changing valve state, Steve Mcmahon, 15:23
  • Re: [Discuss-gnuradio] grc amplitude demodulation questions, Marcus D. Leech, 15:22
  • Re: [Discuss-gnuradio] grc amplitude demodulation questions, Josh Blum, 15:21
  • Re: [Discuss-gnuradio] grc amplitude demodulation questions, ematlis, 14:56
  • [Discuss-gnuradio] usrp2 dtor can throw !, Gaetano Mendola, 11:31
  • Re: [Discuss-gnuradio] OFDM receiver on USRP2, Guanbo, 02:48
  • [Discuss-gnuradio] uhd.tune_request_t & DBRSX[2], john, 02:01
• January 13, 2011
  • Re: [Discuss-gnuradio] LPDA orientation when receiving GPS signals on USRP2, Matt Ettus, 23:41
  • Re: [Discuss-gnuradio] LPDA orientation when receiving GPS signals on USRP2, john, 22:37
  • [Discuss-gnuradio] LPDA orientation when receiving GPS signals on USRP2, Nick Othieno, 22:09
  • [Discuss-gnuradio] re: Low cost hardware option, B . A . f . H, 18:24
  • Re: [Discuss-gnuradio] volk: duplicate symbol _volk_cpu, Tom Rondeau, 18:22
  • Re: [Discuss-gnuradio] OFDM receiver on USRP2, Tom Rondeau, 18:18
  • Re: [Discuss-gnuradio] Passing a message from one block to other, Tom Rondeau, 18:12
  • Re: [Discuss-gnuradio] DDC and Polyphase Channelizer, Tom Rondeau, 18:04
  • Re: [Discuss-gnuradio] OFDM Benchmark Change Modulation, Tom Rondeau, 18:01
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, Marcus D. Leech, 17:34
  • Re: [Discuss-gnuradio] grc amplitude demodulation questions, Marcus D. Leech, 17:26
  • [Discuss-gnuradio] grc amplitude demodulation questions, ematlis, 17:10
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, sirjanselot, 16:59
  • [Discuss-gnuradio] transient when changing valve state, David L, 14:59
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Matt Ettus, 14:03
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Josh Blum, 14:00
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, Marcus D. Leech, 11:59
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, Marcus D. Leech, 11:33
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, jan acosta, 11:23
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Gabriel Morel, 11:14
  • Re: [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, Euripedes Rocha Filho, 10:33
  • Re: [Discuss-gnuradio] re: Low cost hardware option, William Cox, 10:11
  • [Discuss-gnuradio] Building an RF Front end for DSP FPGA Kits with ADCs, sirjanselot, 09:46
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Philip Balister, 08:02
  • Re: [Discuss-gnuradio] Change of complex binary file format for Matlab., Sangho Oh, 02:23
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Jamie Morken, 02:00
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Moeller, 01:58
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Mark J. Blair, 01:54
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Moeller, 01:28
  • Re: [Discuss-gnuradio] Change of complex binary file format for Matlab., Alan Jones, 00:51
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Jeff Brower, 00:43
  • Re: [Discuss-gnuradio] Change of complex binary file format for Matlab., Josh Blum, 00:31
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Jamie Morken, 00:17
  • [Discuss-gnuradio] Change of complex binary file format for Matlab., Sangho Oh, 00:00
• January 12, 2011
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Marcus D. Leech, 22:57
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Brian Padalino, 22:46
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Marcus D. Leech, 22:26
  • Re: [Discuss-gnuradio] re: Low cost hardware option, Brian Padalino, 22:01
  • [Discuss-gnuradio] re: Low cost hardware option, Jamie Morken, 20:37
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Tom Rondeau, 19:50
  • Re: [Discuss-gnuradio] OFDM receiver on USRP2, Guanbo, 19:37
  • Re: [Discuss-gnuradio] OFDM receiver on USRP2, Guanbo, 19:36
  • Re: [Discuss-gnuradio] Hooking the USRP up to a battery, Marcus D. Leech, 18:35
  • [Discuss-gnuradio] Hooking the USRP up to a battery, Isaac Gerg, 18:24
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Marcus D. Leech, 18:17
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", John Gilmore, 18:03
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Josh Blum, 17:57
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Euripedes Rocha Filho, 17:42
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Matt Ettus, 17:28
  • Re: [Discuss-gnuradio] Low cost hardware option, Euripedes Rocha Filho, 17:28
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Marcus D. Leech, 17:23
  • Re: [Discuss-gnuradio] Low cost hardware option, Marcus D. Leech, 17:16
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Douglas Geiger, 16:21
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Moeller, 16:11
  • [Discuss-gnuradio] Low cost hardware option, Euripedes Rocha Filho, 16:03
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Marcus D. Leech, 15:48
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Marcus D. Leech, 15:43
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Steven Clark, 15:42
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Gabriel Morel, 15:31
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Michael Dickens, 15:23
  • [Discuss-gnuradio] Open Source USRP ?, Moeller, 15:19
  • Re: [Discuss-gnuradio] Unofficial Gnuradio Installation Procedure for Newbies on Fedora 14, Marcus D. Leech, 15:11
  • Re: [Discuss-gnuradio] Passing a message from one block to other, Nick Foster, 15:03
  • [Discuss-gnuradio] Unofficial Gnuradio Installation Procedure for Newbies on Fedora 14, Nick Othieno, 14:59
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Moeller, 14:55
  • [Discuss-gnuradio] Passing a message from one block to other, John Andrews, 14:46
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Matt Ettus, 14:43
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Marcus D. Leech, 14:31
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDPimage ...but not with compiled Raw Ethernet Image, Gabriel Morel, 14:26
  • Re: [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDP image ...but not with compiled Raw Ethernet Image, Matt Ettus, 14:10
  • Re: [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Marcus D. Leech, 13:20
  • [Discuss-gnuradio] The (in)famous channel 0 not receiving error, Nick Othieno, 12:52
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Douglas Geiger, 11:52
  • Re: [Discuss-gnuradio] Baseband vs. Carrier freq., John Andrews, 11:51
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 11:24
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Tom Rondeau, 11:05
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Marcus D. Leech, 11:03
  • Re: [Discuss-gnuradio] "Open-Hardware", Marcus D. Leech, 10:45
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Sanjay Singh, 10:27
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Steven Clark, 09:56
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Marc Epard, 08:56
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Michael Dickens, 08:25
  • [Discuss-gnuradio] Re: "Open-Hardware", Patrick Strasser, 08:18
  • [Discuss-gnuradio] Finally compiled USRP2 code works fine with UDP image ...but not with compiled Raw Ethernet Image, anirudh2059., 08:11
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Mark Steward, 04:54
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Sylvain Munaut, 04:35
  • Re: [Discuss-gnuradio] "Open-Hardware", Moeller, 03:19
  • Re: [Discuss-gnuradio] "Open-Hardware", Marcus D. Leech, 03:11
  • Re: [Discuss-gnuradio] GNURadio and CUDA reprised, Moeller, 02:43
  • Re: [Discuss-gnuradio] Baseband vs. Carrier freq., Songsong Gee, 02:31
  • Re: [Discuss-gnuradio] "Open-Hardware", Moeller, 02:31
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Moeller, 02:15
  • Re: [Discuss-gnuradio] Baseband vs. Carrier freq., Nick Foster, 02:08
  • [Discuss-gnuradio] Baseband vs. Carrier freq., Songsong Gee, 01:38
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Alexander Chemeris, 01:27
  • Re: [Discuss-gnuradio] OFDM on USRP2, Guanbo, 00:27
• January 11, 2011
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Miok Wah, 22:44
  • Re: [Discuss-gnuradio] Make check failure in next branch, Tom Rondeau, 22:06
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Marcus D. Leech, 20:40
  • Re: [Discuss-gnuradio] OFDM on USRP2, Tom Rondeau, 20:36
  • Re: [Discuss-gnuradio] Re: "Open-Hardware", Mark J. Blair, 20:21
  • [Discuss-gnuradio] Re: "Open-Hardware", Patrick Strasser, 20:16
  • [Discuss-gnuradio] Re: "Open-Hardware", Patrick Strasser, 20:02
  • Re: [Discuss-gnuradio] "Open-Hardware", Marcus D. Leech, 19:45
  • Re: [Discuss-gnuradio] "Open-Hardware", Marcus D. Leech, 19:16
  • [Discuss-gnuradio] "Open-Hardware", Patrick Strasser, 18:13
  • Re: [Discuss-gnuradio] wbx - usrp_benchmark_usb.py failed at testing 4MB/sec, Kyle Zhou, 17:44
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Philip Balister, 17:34
  • [Discuss-gnuradio] GNURadio and CUDA reprised, Andrew Hofmaier, 17:14
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Marcus D. Leech, 16:28
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Matt Ettus, 16:18
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Miok Wah, 15:39
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Miok Wah, 15:36
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Alexander Chemeris, 15:14
  • Re: [Discuss-gnuradio] Parallel programming, Michael Dickens, 14:22
  • [Discuss-gnuradio] CGRAN -- come share your GNU Radio / USRP projects!, George Nychis, 14:18
  • Re: [Discuss-gnuradio] What Modulation Scheme does RFX400 can perform?, Songsong Gee, 14:08
  • Re: [Discuss-gnuradio] Cfile with USRP1 and DBSRX2, Josh Blum, 14:07
  • [Discuss-gnuradio] Cfile with USRP1 and DBSRX2, elvis daprai, 13:54
  • Re: [Discuss-gnuradio] What Modulation Scheme does RFX400 can perform?, Marcus D. Leech, 12:55
  • Re: [Discuss-gnuradio] Compile Gnuradio 3.3.0, Ben Ahrens, 12:53
  • Re: [Discuss-gnuradio] What Modulation Scheme does RFX400 can perform?, Nick Foster, 12:43
  • [Discuss-gnuradio] What Modulation Scheme does RFX400 can perform?, Songsong Gee, 11:57
  • Re: [Discuss-gnuradio] On Starving Students, Jeff Brower, 11:19
  • [Discuss-gnuradio] Correct directory structure for <path>/gnuradio/usrp2/fpga, Nick Othieno, 11:10
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Markus Heller M.A. (relix GmbH), 10:58
  • [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Patrick Strasser, 10:23
  • Re: [Discuss-gnuradio] how to get started using UHD, Nick Othieno, 10:22
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Marcus D. Leech, 10:21
  • Fw: [Discuss-gnuradio] Re: A Humble Request....for allowing tocopyCircuit into PCB, Patrik Tast, 10:20
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copyCircuit into PCB, Patrik Tast, 08:07
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, James Hall, 08:00
  • [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Patrick Strasser, 06:37
  • Re: [Discuss-gnuradio] USRP2 connection problem, mehmet kabasakal, 02:04
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Moeller, 01:57
  • [Discuss-gnuradio] On Starving Students, Matt Ettus, 01:52
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Moeller, 01:20
  • Re: [Discuss-gnuradio] wbx - usrp_benchmark_usb.py failed at testing 4MB/sec, Howard Wong, 01:18
  • [Discuss-gnuradio] how to calculate the peak values of a signal spectrum by a grc project, M. H., 01:10
  • Re: [Discuss-gnuradio] Alternative Hardware [was: Re: A Humble Request.... - "Open-Hardware"], Moeller, 01:03
• January 10, 2011
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Josh Blum, 23:57
  • Re: [Discuss-gnuradio] Compile Gnuradio 3.3.0, Howard Wong, 23:30
  • Re: [Discuss-gnuradio] volk: duplicate symbol _volk_cpu, update lee, 23:04
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Marten Christophe, 22:24
  • Re: [Discuss-gnuradio] Benchmark scripts, Patrick Yeon, 19:09
  • Re: [Discuss-gnuradio] Benchmark scripts, Marcus D. Leech, 18:58
  • Re: [Discuss-gnuradio] Benchmark scripts, John Gilmore, 18:41
  • Re: [Discuss-gnuradio] USRP2 UHD error: No control response, Josh Blum, 18:36
  • Re: [Discuss-gnuradio] how to get started using UHD, Josh Blum, 18:28
  • Re: [Discuss-gnuradio] how to get started using UHD, Nick Othieno, 18:21
  • [Discuss-gnuradio] OFDM on USRP2, mrahaim, 17:56
  • [Discuss-gnuradio] USRP2 UHD error: No control response, Ben Ahrens, 17:31
  • Re: [Discuss-gnuradio] Parallel programming, jan acosta, 17:29
  • Re: [Discuss-gnuradio] Benchmark scripts, Marcus D. Leech, 17:08
  • Re: [Discuss-gnuradio] Parallel programming, Tom Rondeau, 16:51
  • [Discuss-gnuradio] 192KHz sound card experience: WWVB, etc, Marcus D. Leech, 16:28
  • Re: [Discuss-gnuradio] Benchmark scripts, Nick Foster, 16:16
  • Re: [Discuss-gnuradio] Benchmark scripts, Steve Mcmahon, 16:14
  • [Discuss-gnuradio] Benchmark scripts, Thomas H Kim, 15:55
  • Re: [Discuss-gnuradio] Parallel programming, Michael Dickens, 15:45
  • Re: [Discuss-gnuradio] Parallel programming, Marcus D. Leech, 15:43
  • Re: [Discuss-gnuradio] Compile Gnuradio 3.3.0, Howard Wong, 15:24
  • Re: [Discuss-gnuradio] Parallel programming, sirjanselot, 15:11
  • Re: [Discuss-gnuradio] About clock rate of USRP E100, Philip Balister, 15:03
  • Re: [Discuss-gnuradio] Compile Gnuradio 3.3.0, Ben Ahrens, 14:44
  • Re: [Discuss-gnuradio] Creating a gr_sync_block subclass in python?, Josh Blum, 14:35
  • [Discuss-gnuradio] Compile Gnuradio 3.3.0, Howard Wong, 13:50
  • Re: [Discuss-gnuradio] Alternative Hardware, Marcus D. Leech, 13:07
  • Re: [Discuss-gnuradio] USRP2 & DBSRX2, Nick Othieno, 12:47
  • Re: [Discuss-gnuradio] USRP2 & DBSRX2, Nick Othieno, 12:44
  • Re: [Discuss-gnuradio] Alternative Hardware [was: Re: A Humble Request.... - "Open-Hardware"], Rafael Diniz, 12:42
  • Re: [Discuss-gnuradio] Parallel programming, Michael Dickens, 12:36
  • Re: [Discuss-gnuradio] Alternative Hardware [was: Re: A Humble Request.... - "Open-Hardware"], Rafael Diniz, 12:30
  • Re: [Discuss-gnuradio] USRP2 & DBSRX2, Marcus D. Leech, 12:18
  • Re: [Discuss-gnuradio] USRP2 & DBSRX2, Nick Othieno, 11:46
  • Re: [Discuss-gnuradio] USRP2 & DBSRX2, Nick Foster, 11:18
  • Re: [Discuss-gnuradio] USRP2 & DBSRX2, Marcus D. Leech, 11:13
  • [Discuss-gnuradio] Using a TV tuner as a high speed ADC, ikjtel, 11:08
  • [Discuss-gnuradio] Parallel programming, sirjanselot, 10:52
  • [Discuss-gnuradio] USRP2 & DBSRX2, Nick Othieno, 10:45
  • Re: [Discuss-gnuradio] Alternative Hardware [was: Re: A Humble Request.... - "Open-Hardware"], Martin Braun, 09:35
  • [Discuss-gnuradio] Make check failure in next branch, Philip Balister, 09:27
  • [Discuss-gnuradio] About clock rate of USRP E100, Miok Wah, 09:25
  • [Discuss-gnuradio] Alternative Hardware [was: Re: A Humble Request.... - "Open-Hardware"], Patrick Strasser, 08:24
  • Re: [Discuss-gnuradio] USRP2 connection problem, Andrew Rich, 04:55
  • [Discuss-gnuradio] USRP2 connection problem, mehmet kabasakal, 03:56
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", J.D. Bakker, 03:26
• January 09, 2011
  • Re: [Discuss-gnuradio] questions about sdcc when configuring gnuradio, Peter F Bradshaw, 21:21
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Marcus D. Leech, 20:23
  • [Discuss-gnuradio] Problem of Daughterboard XCVR 2450, Guanbo Zheng, 20:03
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Moeller, 19:42
  • Re: [Discuss-gnuradio] Re: Building gr-uhd: .Tpo file not found/Permission denied, Marcus D. Leech, 19:38
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Marcus D. Leech, 19:35
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", J.D. Bakker, 18:43
  • [Discuss-gnuradio] Re: Building gr-uhd: .Tpo file not found/Permission denied, Patrick Strasser, 18:39
  • [Discuss-gnuradio] Re: using rsh from a remote host, Patrick Strasser, 18:20
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Moeller, 18:10
  • Re: [Discuss-gnuradio] Re: using rsh from a remote host, Sangho Oh, 17:30
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Marcus D. Leech, 16:34
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Moeller, 16:18
  • [Discuss-gnuradio] Re: using rsh from a remote host, Patrick Strasser, 13:57
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", J.D. Bakker, 12:30
  • [Discuss-gnuradio] questions about sdcc when configuring gnuradio, Jie Liu, 12:25
  • Re: [Discuss-gnuradio] Re: A Humble Request.... - "Open-Hardware", Moeller, 12:06
  • [Discuss-gnuradio] Try a PCR100 or PCR1000 ?, William Pretty Security Inc, 11:30
  • Re: [Discuss-gnuradio] A Humble Request....for allowing to copy Circuit into PCB, ikjtel, 09:32
  • [Discuss-gnuradio] using rsh from a remote host, Sangho Oh, 00:39
• January 08, 2011
  • Re: [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Brian Padalino, 23:48
  • Re: [Discuss-gnuradio] Re: D-Star with gnuradio?, Rafael Diniz, 23:28
  • Re: [Discuss-gnuradio] Building gr-uhd: .Tpo file not found/Permission denied, Josh Blum, 22:29
  • [Discuss-gnuradio] Re: D-Star with gnuradio?, Patrick Strasser, 22:23
  • [Discuss-gnuradio] Building gr-uhd: .Tpo file not found/Permission denied, Patrick Strasser, 22:07
  • Re: [Discuss-gnuradio] Re: D-Star with gnuradio?, Rafael Diniz, 21:56
  • Re: [Discuss-gnuradio] Re: How the valve block works, Don Ward, 21:35
  • [Discuss-gnuradio] Re: D-Star with gnuradio?, Patrick Strasser, 21:17
  • [Discuss-gnuradio] pycpuid - cpuid for python, Josh Blum, 20:28
  • [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Marten Christophe, 18:39
  • [Discuss-gnuradio] Creating a gr_sync_block subclass in python?, Holger Freyther, 17:35
  • Re:Re: [Discuss-gnuradio] how can I proceed if no message is received?, Jie Liu, 17:13
  • Re: [Discuss-gnuradio] Re: How the valve block works, Alexandru Csete, 16:22
  • Re: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Alexandru Csete, 15:56
  • Re: [Discuss-gnuradio] how can I proceed if no message is received?, Tom Rondeau, 15:16
  • [Discuss-gnuradio] Re: How the valve block works, Patrick Strasser, 12:32
  • Re: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Mike Cornelius, 02:51
• January 07, 2011
  • Re: [Discuss-gnuradio] Re: How the valve block works, Josh Blum, 23:29
  • Re: [Discuss-gnuradio] USRP1 Clock drift, Matt Robert, 22:25
  • [Discuss-gnuradio] D-Star with gnuradio?, Rafael Diniz, 21:30
  • [Discuss-gnuradio] Re: How the valve block works, Patrick Strasser, 21:21
  • Re: [Discuss-gnuradio] How the valve block works, Josh Blum, 19:44
  • [Discuss-gnuradio] How the valve block works, Patrick Strasser, 19:13
  • [Discuss-gnuradio] OFDM benchmark, Guanbo Zheng, 18:18
  • [Discuss-gnuradio] Re: GNU Stow and make install (DESTDIR), Patrick Strasser, 08:39
  • Re: [Discuss-gnuradio] how to make 8 bits sample works, James Jordan, 02:57
• January 06, 2011
  • Re: [Discuss-gnuradio] USRP1 Clock drift, Peter F Bradshaw, 22:14
  • Re: [Discuss-gnuradio] Channel estimate block, Tom Rondeau, 20:09
  • Re: [Discuss-gnuradio] USRP1 Clock drift, Nick Foster, 18:42
  • [Discuss-gnuradio] USRP1 Clock drift, Matt Robert, 18:01
  • Re: [Discuss-gnuradio] Re: GNU Stow and make install (DESTDIR), Alexandru Csete, 16:59
  • Re: [Discuss-gnuradio] Question about the HBF in the DDC, Matt Ettus, 16:55
  • Re: [Discuss-gnuradio] how to make 8 bits sample works, Nick Foster, 16:10
  • [Discuss-gnuradio] Re: GNU Stow and make install (DESTDIR), Patrick Strasser, 15:44
  • Re: [Discuss-gnuradio] GNU Stow and make install (DESTDIR), Alexandru Csete, 15:10
  • Re: [Discuss-gnuradio] GNU Stow and make install (DESTDIR), Tom Rondeau, 14:54
  • [Discuss-gnuradio] GNU Stow and make install (DESTDIR), Patrick Strasser, 13:55
  • Re: [Discuss-gnuradio] QA tests for FIR filters, Tom Rondeau, 10:32
  • Re: [Discuss-gnuradio] Highest Datarates with GNURadio, Tom Rondeau, 10:02
  • Re: [Discuss-gnuradio] GRC selector audio sink error, Alexandru Csete, 05:16
  • [Discuss-gnuradio] how to make 8 bits sample works, James Jordan, 02:08
  • [Discuss-gnuradio] GRC selector audio sink error, Phelps Williams, 00:51
• January 05, 2011
  • [Discuss-gnuradio] why use 8 bits sample is not as accurate as use 16 bits sample shift right 8 bits then shift left 8bits?, James Jordan, 21:10
  • [Discuss-gnuradio] Channel estimate block, intermilan, 20:29
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 16:10
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Josh Blum, 15:45
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Josh Blum, 15:21
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 15:13
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Nick Foster, 14:55
  • Re: [Discuss-gnuradio] Confusing uO Errors, Neil Bedwell, 14:43
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 14:41
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 14:33
  • Re: [Discuss-gnuradio] Confusing uO Errors, Nick Foster, 13:28
  • [Discuss-gnuradio] QA tests for FIR filters, Philip Balister, 11:25
  • Re: [Discuss-gnuradio] Question about the HBF in the DDC, peng senl, 11:03
  • Re: [Discuss-gnuradio] adaptive modulation and coding with USRP1, You Lizhao, 10:48
  • [Discuss-gnuradio] Confusing uO Errors, Neil Bedwell, 10:47
  • [Discuss-gnuradio] adaptive modulation and coding with USRP1, Hanjin Park, 07:25
  • Re: [Discuss-gnuradio] Need help in emergency for the fpga image, Matthias Wilhelm, 04:41
  • Re: [Discuss-gnuradio] DDC and Polyphase Channelizer, Jimmy Richardson, 04:14
  • [Discuss-gnuradio] Re: can inband_2rxhb_2tx.rbf use 8 bits sample?, James Jordan, 03:49
• January 04, 2011
  • [Discuss-gnuradio] Re: question about RFX2400, Nick Foster, 21:38
  • [Discuss-gnuradio] question about RFX2400, Malihe Ahmadi, 21:27
  • [Discuss-gnuradio] can inband_2rxhb_2tx.rbf use 8 bits sample?, James Jordan, 21:13
  • Re: [Discuss-gnuradio] Question about the HBF in the DDC, Tom Rondeau, 20:32
  • Re: [Discuss-gnuradio] Synchronized packet transmission, Josh Blum, 19:15
  • [Discuss-gnuradio] Highest Datarates with GNURadio, mrahaim, 18:59
  • Re: [Discuss-gnuradio] how to perform spectrum sensing using energy detection method using gnu radio and usrp, Marcus D. Leech, 16:38
  • RE: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Mike Cornelius, 16:28
  • [Discuss-gnuradio] how to perform spectrum sensing using energy detection method using gnu radio and usrp, abhijeet mate, 16:27
  • [Discuss-gnuradio] how can I proceed if no message is received?, Jie Liu, 14:19
  • [Discuss-gnuradio] Need help in emergency for the fpga image, Gabriel Morel, 13:30
  • [Discuss-gnuradio] Question about the HBF in the DDC, peng senl, 13:13
  • Re: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Tom Rondeau, 11:04
  • Re: [Discuss-gnuradio] MIMO-OFDM 2x1 Alamouti code., Tom Rondeau, 10:50
  • Re: [Discuss-gnuradio] DDC and Polyphase Channelizer, Tom Rondeau, 10:45
  • [Discuss-gnuradio] OFDM Benchmark Change Modulation, You Lizhao, 08:49
  • Re: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Alexandru Csete, 08:47
  • [Discuss-gnuradio] USB controller. How to solve ehci problem?, Fran_, 07:31
  • Re: [Discuss-gnuradio] cannot detect USRP2 on ubuntu 9.10 whatsoever...various solutions adopted..., yyl, 05:11
  • Re: [Discuss-gnuradio] cannot detect USRP2 on ubuntu 9.10 whatsoever...various solutions adopted..., Andrew Rich, 04:30
  • RE: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Mike Cornelius, 04:01
  • Re: [Discuss-gnuradio] cannot detect USRP2 on ubuntu 9.10 whatsoever...various solutions adopted..., yyl, 03:54
  • Re: [Discuss-gnuradio] RX waveform is not what I expected..., Brian Padalino, 00:45
  • [Discuss-gnuradio] MIMO-OFDM 2x1 Alamouti code., mmena, 00:33
  • [Discuss-gnuradio] RX waveform is not what I expected..., Songsong Gee, 00:27
• January 03, 2011
  • Re: [Discuss-gnuradio] DDC and Polyphase Channelizer, Jimmy Richardson, 23:25
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Andrew Rich, 17:13
  • Re: [Discuss-gnuradio] Synchronized packet transmission, Sangho Oh, 15:16
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Marcus D. Leech, 15:11
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Mark J. Blair, 14:23
  • [Discuss-gnuradio] Re: A Humble Request....for allowing to copy Circuit into PCB, Marten Christophe, 12:58
  • Re: [Discuss-gnuradio] TETRA phase adjustment bits, Harald Welte, 12:39
  • Re: [Discuss-gnuradio] DDC and Polyphase Channelizer, Tom Rondeau, 11:38
  • Re: [Discuss-gnuradio] TETRA phase adjustment bits, Tom Rondeau, 11:26
  • Re: [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Tom Rondeau, 10:42
  • [Discuss-gnuradio] Installing the latest gnuradio and gnuradio-companion (grc) in Fedora 14, Brad Hein, 08:35
  • [Discuss-gnuradio] EUSIPCO 2011, Per Zetterberg, 05:22
  • [Discuss-gnuradio] gr_qtgui, SWIG. QT Signals and such, Mike Cornelius, 02:53
  • [Discuss-gnuradio] Compiled u2_rev3.bin and u2_rev3-udp-ise12-20100615.bin are different?, anirudh2059., 01:03
• January 02, 2011
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Ed Criscuolo, 22:21
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Andrew Rich, 20:18
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Andrew Rich, 20:00
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Andrew Rich, 19:56
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Tom Rondeau, 19:51
  • Re: [Discuss-gnuradio] building gnuradio on windows with msvc, Moeller, 18:50
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Andrew Rich, 17:32
  • Re: [Discuss-gnuradio] Fw: Need Advice for SDR choice, Marcus D. Leech, 17:00
  • [Discuss-gnuradio] Fw: Need Advice for SDR choice, Andrew Rich, 16:49
  • Re: [Discuss-gnuradio] building gnuradio on windows with msvc, Don Ward, 16:38
  • Re: [Discuss-gnuradio] Synchronized packet transmission, Josh Blum, 16:08
  • Re: [Discuss-gnuradio] Synchronized packet transmission, Sangho Oh, 15:59
  • [Discuss-gnuradio] Re: TETRA phase adjustment bits, Harald Welte, 15:05
  • [Discuss-gnuradio] TETRA phase adjustment bits, Harald Welte, 15:02
  • Re: [Discuss-gnuradio] Synchronized packet transmission, Josh Blum, 14:36
  • Re: [Discuss-gnuradio] building gnuradio on windows with msvc, Josh Blum, 14:13
  • [Discuss-gnuradio] Synchronized packet transmission, Sangho Oh, 13:53
  • Re: [Discuss-gnuradio] ICOM 706 MKIIG as input to GNURadio, Marcus D. Leech, 13:36
  • Re: [Discuss-gnuradio] building gnuradio on windows with msvc, Moeller, 11:19
  • [Discuss-gnuradio] building gnuradio on windows with msvc, Josh Blum, 03:05
• January 01, 2011
  • Re: [Discuss-gnuradio] ICOM 706 MKIIG as input to GNURadio, Brad Hein, 23:41
  • Re: [Discuss-gnuradio] ICOM 706 MKIIG as input to GNURadio, ikjtel, 09:13

---

[Prev Period]

[Next Period]

---

Mail converted by MHonArc