agc setting in osmocom source + rtl_tcp

[Kristoff]

Hi all,


I am using the osmocom source block with a remote rtl-sdr v3 dongle in 
direct mode (i.e. using rtl_tcp on a remote linux device).



Is there an easy way to configure "agc = 1" on the remote device using 
this setup?

As I use the dongle in direct mode, the normal 'gain' setting is ignored 
so the only option to get a descent signal-level at low frequencies is 
by enabling the agc.
But neither the osmocom source block as the rtl source block have an 
option to enable the agc.

Anybody any idea on how to do this?
(except patching rtl_tcp on the remote side)

Kristoff (on1arf)