[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/lisp/mh-e/mh-loaddefs.el
|
From: |
Bill Wohler |
|
Subject: |
[Emacs-diffs] Changes to emacs/lisp/mh-e/mh-loaddefs.el |
|
Date: |
Sat, 28 May 2005 18:04:59 -0400 |
Index: emacs/lisp/mh-e/mh-loaddefs.el
diff -c emacs/lisp/mh-e/mh-loaddefs.el:1.12 emacs/lisp/mh-e/mh-loaddefs.el:1.13
*** emacs/lisp/mh-e/mh-loaddefs.el:1.12 Wed May 18 11:01:20 2005
--- emacs/lisp/mh-e/mh-loaddefs.el Sat May 28 22:04:54 2005
***************
*** 1,6 ****
;;; mh-loaddefs.el --- automatically extracted autoloads
;;
! ;;; Copyright (C) 2005 Free Software Foundation, Inc.
;;; Author: Bill Wohler <address@hidden>
;;; Keywords: mail
;;; Commentary:
--- 1,6 ----
;;; mh-loaddefs.el --- automatically extracted autoloads
;;
! ;;; Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
;;; Author: Bill Wohler <address@hidden>
;;; Keywords: mail
;;; Commentary:
***************
*** 13,19 ****
;;;;;; mh-check-whom mh-insert-signature mh-to-fcc mh-to-field
mh-fill-paragraph-function
;;;;;; mh-get-header-field mh-send-other-window mh-send mh-reply
;;;;;; mh-redistribute mh-forward mh-extract-rejected-mail mh-edit-again)
! ;;;;;; "mh-comp" "mh-comp.el" (16665 53716))
;;; Generated autoloads from mh-comp.el
(autoload (quote mh-edit-again) "mh-comp" "\
--- 13,19 ----
;;;;;; mh-check-whom mh-insert-signature mh-to-fcc mh-to-field
mh-fill-paragraph-function
;;;;;; mh-get-header-field mh-send-other-window mh-send mh-reply
;;;;;; mh-redistribute mh-forward mh-extract-rejected-mail mh-edit-again)
! ;;;;;; "mh-comp" "mh-comp.el" (17048 51103))
;;; Generated autoloads from mh-comp.el
(autoload (quote mh-edit-again) "mh-comp" "\
***************
*** 56,63 ****
cc/all sender and all recipients.
If optional prefix argument INCLUDEP provided, then include the message
in the reply using filter `mhl.reply' in your MH directory.
! If the file named by `mh-repl-formfile' exists, it is used as a skeleton
! for the reply.
See also `mh-send'." t nil)
--- 56,65 ----
cc/all sender and all recipients.
If optional prefix argument INCLUDEP provided, then include the message
in the reply using filter `mhl.reply' in your MH directory.
! If the file named by `mh-repl-formfile' exists, it is used as a skeleton for
! the reply. If REPLY-TO is cc or all and you're using either the nmh or GNU
! mailutils variants and the file names by `mh-repl-group-formfile' exists, it
! is used instead.
See also `mh-send'." t nil)
***************
*** 183,189 ****
;;;;;; mh-store-msg mh-undo-folder mh-sort-folder mh-page-digest-backwards
;;;;;; mh-page-digest mh-pipe-msg mh-pack-folder mh-list-folders
;;;;;; mh-kill-folder mh-copy-msg mh-burst-digest) "mh-funcs" "mh-funcs.el"
! ;;;;;; (16671 48788))
;;; Generated autoloads from mh-funcs.el
(autoload (quote mh-burst-digest) "mh-funcs" "\
--- 185,191 ----
;;;;;; mh-store-msg mh-undo-folder mh-sort-folder mh-page-digest-backwards
;;;;;; mh-page-digest mh-pipe-msg mh-pack-folder mh-list-folders
;;;;;; mh-kill-folder mh-copy-msg mh-burst-digest) "mh-funcs" "mh-funcs.el"
! ;;;;;; (17048 47864))
;;; Generated autoloads from mh-funcs.el
(autoload (quote mh-burst-digest) "mh-funcs" "\
***************
*** 261,267 ****
;;;;;; mh-identity-insert-attribution-verb
mh-identity-handler-attribution-verb
;;;;;; mh-identity-handler-signature mh-identity-handler-gpg-identity
;;;;;; mh-insert-identity mh-identity-list-set mh-identity-make-menu)
! ;;;;;; "mh-identity" "mh-identity.el" (16671 57010))
;;; Generated autoloads from mh-identity.el
(autoload (quote mh-identity-make-menu) "mh-identity" "\
--- 263,269 ----
;;;;;; mh-identity-insert-attribution-verb
mh-identity-handler-attribution-verb
;;;;;; mh-identity-handler-signature mh-identity-handler-gpg-identity
;;;;;; mh-insert-identity mh-identity-list-set mh-identity-make-menu)
! ;;;;;; "mh-identity" "mh-identity.el" (17044 63778))
;;; Generated autoloads from mh-identity.el
(autoload (quote mh-identity-make-menu) "mh-identity" "\
***************
*** 271,313 ****
(autoload (quote mh-identity-list-set) "mh-identity" "\
Update the `mh-identity-list' variable, and rebuild the menu.
! Sets the default for SYMBOL (e.g. `mh-identity-list') to VALUE (as set in
! customization). This is called after 'customize is used to alter
`mh-identity-list'." nil nil)
(autoload (quote mh-insert-identity) "mh-identity" "\
! Insert proper fields for given IDENTITY.
! Edit the `mh-identity-list' variable to define identity." t nil)
(autoload (quote mh-identity-handler-gpg-identity) "mh-identity" "\
! For FIELD \"pgg-default-user-id\", process for ACTION 'remove or 'add.
The buffer-local variable `mh-identity-pgg-default-user-id' is set to VALUE
when action 'add is selected." nil nil)
(autoload (quote mh-identity-handler-signature) "mh-identity" "\
! For FIELD \"signature\", process headers for ACTION 'remove or 'add.
! The VALUE is added." nil nil)
(autoload (quote mh-identity-handler-attribution-verb) "mh-identity" "\
! For FIELD \"attribution_verb\", process headers for ACTION 'remove or 'add.
! The VALUE is added." nil nil)
(autoload (quote mh-identity-insert-attribution-verb) "mh-identity" "\
Insert VALUE as attribution verb, setting up delimiting markers.
If VALUE is nil, use `mh-extract-from-attribution-verb'." nil nil)
(autoload (quote mh-identity-handler-top) "mh-identity" "\
! For FIELD, process mh-identity headers for ACTION 'remove or 'add.
! If the field wasn't present, the VALUE is added at the top of the header."
nil nil)
(autoload (quote mh-identity-handler-bottom) "mh-identity" "\
! For FIELD, process mh-identity headers for ACTION 'remove or 'add.
! If the field wasn't present, the VALUE is added at the bottom of the header."
nil nil)
;;;***
! ;;;### (autoloads (mh-inc-spool-list-set) "mh-inc" "mh-inc.el" (16671
! ;;;;;; 48848))
;;; Generated autoloads from mh-inc.el
(autoload (quote mh-inc-spool-list-set) "mh-inc" "\
--- 273,318 ----
(autoload (quote mh-identity-list-set) "mh-identity" "\
Update the `mh-identity-list' variable, and rebuild the menu.
! Sets the default for SYMBOL (for example, `mh-identity-list') to VALUE (as set
! in customization). This is called after 'customize is used to alter
`mh-identity-list'." nil nil)
(autoload (quote mh-insert-identity) "mh-identity" "\
! Insert fields specified by given IDENTITY.
! See `mh-identity-list'." t nil)
(autoload (quote mh-identity-handler-gpg-identity) "mh-identity" "\
! Process header FIELD \":pgg-default-user-id\".
! The ACTION is one of 'remove or 'add. If 'add, the VALUE is added.
The buffer-local variable `mh-identity-pgg-default-user-id' is set to VALUE
when action 'add is selected." nil nil)
(autoload (quote mh-identity-handler-signature) "mh-identity" "\
! Process header FIELD \":signature\".
! The ACTION is one of 'remove or 'add. If 'add, the VALUE is added." nil nil)
(autoload (quote mh-identity-handler-attribution-verb) "mh-identity" "\
! Process header FIELD \":attribution-verb\".
! The ACTION is one of 'remove or 'add. If 'add, the VALUE is added." nil nil)
(autoload (quote mh-identity-insert-attribution-verb) "mh-identity" "\
Insert VALUE as attribution verb, setting up delimiting markers.
If VALUE is nil, use `mh-extract-from-attribution-verb'." nil nil)
(autoload (quote mh-identity-handler-top) "mh-identity" "\
! Process header FIELD.
! The ACTION is one of 'remove or 'add. If 'add, the VALUE is added.
! If the field wasn't present, it is added to the top of the header." nil nil)
(autoload (quote mh-identity-handler-bottom) "mh-identity" "\
! Process header FIELD.
! The ACTION is one of 'remove or 'add. If 'add, the VALUE is added.
! If the field wasn't present, it is added to the bottom of the header." nil
nil)
;;;***
! ;;;### (autoloads (mh-inc-spool-list-set) "mh-inc" "mh-inc.el" (17048
! ;;;;;; 44143))
;;; Generated autoloads from mh-inc.el
(autoload (quote mh-inc-spool-list-set) "mh-inc" "\
***************
*** 326,332 ****
;;;;;; mh-index-parse-search-regexp mh-index-do-search mh-index-p
;;;;;; mh-index-read-data mh-index-search mh-index-create-sequences
;;;;;; mh-create-sequence-map mh-index-update-maps) "mh-index" "mh-index.el"
! ;;;;;; (16665 53754))
;;; Generated autoloads from mh-index.el
(autoload (quote mh-index-update-maps) "mh-index" "\
--- 331,337 ----
;;;;;; mh-index-parse-search-regexp mh-index-do-search mh-index-p
;;;;;; mh-index-read-data mh-index-search mh-index-create-sequences
;;;;;; mh-create-sequence-map mh-index-update-maps) "mh-index" "mh-index.el"
! ;;;;;; (17044 64025))
;;; Generated autoloads from mh-index.el
(autoload (quote mh-index-update-maps) "mh-index" "\
***************
*** 346,388 ****
(autoload (quote mh-index-search) "mh-index" "\
Perform an indexed search in an MH mail folder.
! Use a prefix argument to repeat the search, as in REDO-SEARCH-FLAG below.
! If REDO-SEARCH-FLAG is non-nil and the current folder buffer was generated by
a
! index search, then the search is repeated. Otherwise, FOLDER is searched with
! SEARCH-REGEXP and the results are presented in an MH-E folder. If FOLDER is
! \"+\" then mail in all folders are searched. Optional argument WINDOW-CONFIG
! stores the window configuration that will be restored after the user quits the
! folder containing the index search results.
!
! Four indexing programs are supported; if none of these are present, then grep
! is used. This function picks the first program that is available on your
! system. If you would prefer to use a different program, set the customization
! variable `mh-index-program' accordingly.
!
! The documentation for the following functions describes how to generate the
! index for each program:
- `mh-swish++-execute-search'
- `mh-swish-execute-search'
- `mh-mairix-execute-search'
- `mh-namazu-execute-search'
-
- If none of these programs are present then we use pick. If desired grep can be
- used instead. Details about these methods can be found in:
-
- `mh-pick-execute-search'
- `mh-grep-execute-search'
! This and related functions use an X-MHE-Checksum header to cache the MD5
! checksum of a message. This means that already present X-MHE-Checksum headers
! in the incoming email could result in messages not being found. The following
! procmail recipe should avoid this:
!
! :0 wf
! | formail -R \"X-MHE-Checksum\" \"Old-X-MHE-Checksum\"
!
! This has the effect of renaming already present X-MHE-Checksum headers." t
nil)
(autoload (quote mh-index-read-data) "mh-index" "\
Read index data from file." nil nil)
--- 351,424 ----
(autoload (quote mh-index-search) "mh-index" "\
Perform an indexed search in an MH mail folder.
! Use a prefix argument to repeat the search.
! Unlike regular searches, the prompt for the folder to search can be `all' to
! search all folders; in addition, the search works recursively on the listed
! folder. The search criteria are entered in an MH-Pick buffer as described in
! `mh-search-folder'.
!
! To perform the search, type \\<mh-pick-mode-map>\\[mh-do-search]. Another
! difference from the regular searches is that because the search operates on
! more than one folder, the messages that are found are put in a temporary
! sub-folder of `+mhe-index' and are displayed in an MH-Folder buffer. This
! buffer is special because it displays messages from multiple folders; each set
! of messages from a given folder has a heading with the folder name.
!
! In addition, the \\<mh-folder-mode-map>\\[mh-index-visit-folder] command can
! be used to visit the folder of the message at point. Initially, only the
! messages that matched the search criteria are displayed in the folder. While
! the temporary buffer has its own set of message numbers, the actual messages
! numbers are shown in the visited folder. Thus, the \\[mh-index-visit-folder]
! command is useful to find the actual message number of an interesting message,
! or to view surrounding messages with the \\[mh-rescan-folder] command.
!
! Because this folder is temporary, you'll probably get in the habit of killing
! it when you're done with \\[mh-kill-folder].
!
! If you have run the \\[mh-search-folder] command, but change your mind while
! entering the search criteria and actually want to run an indexed search, then
! you can use the \\<mh-pick-mode-map>\\[mh-index-do-search] command in the
! MH-Pick buffer.
!
! The \\<mh-folder-mode-map>\\[mh-index-search] command runs the command defined
! by the `mh-index-program' option. The default value is \"Auto-detect\" which
! means that MH-E will automatically choose one of \"swish++\", \"swish-e\",
! \"mairix\", \"namazu\", \"pick\" and \"grep\" in that order. If, for example,
! you have both \"swish++\" and \"mairix\" installed and you want to use
! \"mairix\", then you can set this option to \"mairix\".
!
! *NOTE*
!
! The \"pick\" and \"grep\" commands do not perform a recursive search on
! the given folder.
!
! This command uses an \"X-MHE-Checksum:\" header field to cache the MD5
! checksum of a message. This means that if an incoming message already contains
! an \"X-MHE-Checksum:\" field, that message might not be found by this command.
! The following \"procmail\" recipe avoids this problem by renaming the existing
! header field:
!
! :0 wf
! | formail -R \"X-MHE-Checksum\" \"X-Old-MHE-Checksum\"
!
! The documentation for the following commands describe how to set up the
! various indexing programs to use with MH-E. The \"pick\" and \"grep\" commands
! do not require additional configuration.
- `mh-swish++-execute-search'
- `mh-swish-execute-search'
- `mh-mairix-execute-search'
- `mh-namazu-execute-search'
- `mh-pick-execute-search'
- `mh-grep-execute-search'
! In a program, if REDO-SEARCH-FLAG is non-nil and the current folder buffer was
! generated by a index search, then the search is repeated. Otherwise, FOLDER is
! searched with SEARCH-REGEXP and the results are presented in an MH-E folder.
! If FOLDER is \"+\" then mail in all folders are searched. Optional argument
! WINDOW-CONFIG stores the window configuration that will be restored after the
! user quits the folder containing the index search results." t nil)
(autoload (quote mh-index-read-data) "mh-index" "\
Read index data from file." nil nil)
***************
*** 463,576 ****
(autoload (quote mh-swish-execute-search) "mh-index" "\
Execute swish-e and read the results.
! In the examples below, replace /home/user/Mail with the path to your MH
! directory.
! First create the directory /home/user/Mail/.swish. Then create the file
! /home/user/Mail/.swish/config with the following contents:
! IndexDir /home/user/Mail
! IndexFile /home/user/Mail/.swish/index
! IndexName \"Mail Index\"
! IndexDescription \"Mail Index\"
! IndexPointer \"http://nowhere\";
! IndexAdmin \"nobody\"
! #MetaNames automatic
! IndexReport 3
! FollowSymLinks no
! UseStemming no
! IgnoreTotalWordCountWhenRanking yes
! WordCharacters abcdefghijklmnopqrstuvwxyz0123456789-
! BeginCharacters abcdefghijklmnopqrstuvwxyz
! EndCharacters abcdefghijklmnopqrstuvwxyz0123456789
! IgnoreLimit 50 1000
! IndexComments 0
! FileRules pathname contains /home/user/Mail/.swish
! FileRules pathname contains /home/user/Mail/mhe-index
! FileRules filename is index
! FileRules filename is \\..*
! FileRules filename is #.*
! FileRules filename is ,.*
! FileRules filename is .*~
If there are any directories you would like to ignore, append lines like the
! following to config:
! FileRules pathname contains /home/user/Mail/scripts
! You do not want to index the folders that hold the results of your searches
! since they tend to be ephemeral and the original messages are indexed anyway.
! The configuration file above assumes that the results are found in sub-folders
! of `mh-index-folder' which is +mhe-index by default.
! Use the following command line to generate the swish index. Run this
! daily from cron:
! swish-e -c /home/user/Mail/.swish/config
!
! FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil
nil)
(autoload (quote mh-swish++-execute-search) "mh-index" "\
Execute swish++ and read the results.
! In the examples below, replace /home/user/Mail with the path to your MH
directory.
! First create the directory /home/user/Mail/.swish++. Then create the file
! /home/user/Mail/.swish++/swish++.conf with the following contents:
! IncludeMeta Bcc Cc Comments Content-Description From Keywords
! IncludeMeta Newsgroups Resent-To Subject To
! IncludeMeta Message-Id References In-Reply-To
! IncludeFile Mail *
! IndexFile /home/user/Mail/.swish++/swish++.index
!
! Use the following command line to generate the swish index. Run this
! daily from cron:
!
! find /home/user/Mail -path /home/user/Mail/mhe-index -prune \\
! -o -path /home/user/Mail/.swish++ -prune \\
! -o -name \"[0-9]*\" -print \\
! | index -c /home/user/Mail/.swish++/swish++.conf /home/user/Mail
!
! You do not want to index the folders that hold the results of your searches
! since they tend to be ephemeral and the original messages are indexed anyway.
! The command above assumes that the results are found in sub-folders of
! `mh-index-folder' which is +mhe-index by default.
! On some systems (Debian GNU/Linux, for example), use index++ instead of index.
! FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil
nil)
(autoload (quote mh-namazu-execute-search) "mh-index" "\
Execute namazu and read the results.
! In the examples below, replace /home/user/Mail with the path to your MH
directory.
! First create the directory /home/user/Mail/.namazu. Then create the file
! /home/user/Mail/.namazu/mknmzrc with the following contents:
!
! package conf; # Don't remove this line!
! $ADDRESS = 'address@hidden';
! $ALLOW_FILE = \"[0-9]*\";
! $EXCLUDE_PATH = \"^/home/user/Mail/(mhe-index|spam)\";
!
! In the above example configuration, none of the mail files contained in the
! directories /home/user/Mail/mhe-index and /home/user/Mail/spam are indexed.
! You do not want to index the folders that hold the results of your searches
! since they tend to be ephemeral and the original messages are indexed anyway.
! The configuration file above assumes that the results are found in sub-folders
! of `mh-index-folder' which is +mhe-index by default.
! Use the following command line to generate the namazu index. Run this
! daily from cron:
! mknmz -f /home/user/Mail/.namazu/mknmzrc -O /home/user/Mail/.namazu \\
! /home/user/Mail
! FOLDER-PATH is the directory in which SEARCH-REGEXP is used to search." nil
nil)
(autoload (quote mh-index-choose) "mh-index" "\
Choose an indexing function.
--- 499,607 ----
(autoload (quote mh-swish-execute-search) "mh-index" "\
Execute swish-e and read the results.
! In the examples below, replace \"/home/user/Mail\" with the path to your
! MH directory.
! First create the directory \"/home/user/Mail/.swish\". Then create the file
! \"/home/user/Mail/.swish/config\" with the following contents:
! DefaultContents TXT*
! IndexDir /home/user/Mail
! IndexFile /home/user/Mail/.swish/index
! IndexName \"Mail Index\"
! IndexDescription \"Mail Index\"
! IndexPointer \"http://nowhere\";
! IndexAdmin \"nobody\"
! #MetaNames automatic
! IndexReport 3
! FollowSymLinks no
! UseStemming no
! IgnoreTotalWordCountWhenRanking yes
! WordCharacters abcdefghijklmnopqrstuvwxyz0123456789-
! BeginCharacters abcdefghijklmnopqrstuvwxyz
! EndCharacters abcdefghijklmnopqrstuvwxyz0123456789
! IgnoreLimit 50 1000
! IndexComments 0
! FileRules filename contains \\D
! FileRules pathname contains /home/user/Mail/.swish
! FileRules pathname contains /home/user/Mail/mhe-index
!
! This configuration does not index the folders that hold the results of your
! searches in \"+mhe-index\" since they tend to be ephemeral and the original
! messages are indexed anyway.
If there are any directories you would like to ignore, append lines like the
! following to \"config\":
! FileRules pathname contains /home/user/Mail/scripts
! Use the following command line to generate the swish index. Run this daily
! from cron:
! swish-e -c /home/user/Mail/.swish/config
! In a program, FOLDER-PATH is the directory in which SEARCH-REGEXP is used to
! search." nil nil)
(autoload (quote mh-swish++-execute-search) "mh-index" "\
Execute swish++ and read the results.
! In the examples below, replace \"/home/user/Mail\" with the path to your MH
directory.
! First create the directory \"/home/user/Mail/.swish++\". Then create the file
! \"/home/user/Mail/.swish++/swish++.conf\" with the following contents:
! IncludeMeta Bcc Cc Comments Content-Description From Keywords
! IncludeMeta Newsgroups Resent-To Subject To
! IncludeMeta Message-Id References In-Reply-To
! IncludeFile Mail *
! IndexFile /home/user/Mail/.swish++/swish++.index
!
! Use the following command line to generate the swish index. Run this daily
! from cron:
!
! find /home/user/Mail -path /home/user/Mail/mhe-index -prune \\
! -o -path /home/user/Mail/.swish++ -prune \\
! -o -name \"[0-9]*\" -print \\
! | index -c /home/user/Mail/.swish++/swish++.conf -
!
! This command does not index the folders that hold the results of your searches
! in \"+mhe-index\" since they tend to be ephemeral and the original messages
! are indexed anyway.
! On some systems (Debian GNU/Linux, for example), use \"index++\" instead of
! \"index\".
! In a program, FOLDER-PATH is the directory in which SEARCH-REGEXP is used to
! search." nil nil)
(autoload (quote mh-namazu-execute-search) "mh-index" "\
Execute namazu and read the results.
! In the examples below, replace \"/home/user/Mail\" with the path to your MH
directory.
! First create the directory \"/home/user/Mail/.namazu\". Then create the file
! \"/home/user/Mail/.namazu/mknmzrc\" with the following contents:
! package conf; # Don't remove this line!
! $ADDRESS = 'address@hidden';
! $ALLOW_FILE = \"[0-9]*\";
! $EXCLUDE_PATH = \"^/home/user/Mail/(mhe-index|spam)\";
!
! This configuration does not index the folders that hold the results of your
! searches in \"+mhe-index\" since they tend to be ephemeral and the original
! messages are indexed anyway.
! Use the following command line to generate the namazu index. Run this daily
! from cron:
! mknmz -f /home/user/Mail/.namazu/mknmzrc -O /home/user/Mail/.namazu \\
! /home/user/Mail
! In a program, FOLDER-PATH is the directory in which SEARCH-REGEXP is used to
! search." nil nil)
(autoload (quote mh-index-choose) "mh-index" "\
Choose an indexing function.
***************
*** 582,588 ****
;;;***
;;;### (autoloads (mh-variants mh-variant-p mh-variant-set) "mh-init"
! ;;;;;; "mh-init.el" (16684 6777))
;;; Generated autoloads from mh-init.el
(autoload (quote mh-variant-set) "mh-init" "\
--- 613,619 ----
;;;***
;;;### (autoloads (mh-variants mh-variant-p mh-variant-set) "mh-init"
! ;;;;;; "mh-init.el" (17044 64253))
;;; Generated autoloads from mh-init.el
(autoload (quote mh-variant-set) "mh-init" "\
***************
*** 604,610 ****
;;;***
;;;### (autoloads (mh-junk-whitelist mh-junk-blacklist) "mh-junk"
! ;;;;;; "mh-junk.el" (16671 48929))
;;; Generated autoloads from mh-junk.el
(autoload (quote mh-junk-blacklist) "mh-junk" "\
--- 635,641 ----
;;;***
;;;### (autoloads (mh-junk-whitelist mh-junk-blacklist) "mh-junk"
! ;;;;;; "mh-junk.el" (17044 64253))
;;; Generated autoloads from mh-junk.el
(autoload (quote mh-junk-blacklist) "mh-junk" "\
***************
*** 644,650 ****
;;;;;; mh-mhn-compose-external-compressed-tar mh-mhn-compose-anon-ftp
;;;;;; mh-mhn-compose-insertion mh-file-mime-type mh-have-file-command
;;;;;; mh-compose-forward mh-compose-insertion) "mh-mime" "mh-mime.el"
! ;;;;;; (16684 7323))
;;; Generated autoloads from mh-mime.el
(autoload (quote mh-compose-insertion) "mh-mime" "\
--- 675,681 ----
;;;;;; mh-mhn-compose-external-compressed-tar mh-mhn-compose-anon-ftp
;;;;;; mh-mhn-compose-insertion mh-file-mime-type mh-have-file-command
;;;;;; mh-compose-forward mh-compose-insertion) "mh-mime" "mh-mime.el"
! ;;;;;; (17048 47895))
;;; Generated autoloads from mh-mime.el
(autoload (quote mh-compose-insertion) "mh-mime" "\
***************
*** 857,871 ****
;;;***
;;;### (autoloads (mh-do-search mh-pick-do-search mh-search-folder)
! ;;;;;; "mh-pick" "mh-pick.el" (16671 49140))
;;; Generated autoloads from mh-pick.el
(autoload (quote mh-search-folder) "mh-pick" "\
Search FOLDER for messages matching a pattern.
! This function uses the MH command `pick' to do the work.
! Add the messages found to the sequence named `search'.
! Argument WINDOW-CONFIG is the current window configuration and is used when
! the search folder is dismissed." t nil)
(autoload (quote mh-pick-do-search) "mh-pick" "\
Find messages that match the qualifications in the current pattern buffer.
--- 888,966 ----
;;;***
;;;### (autoloads (mh-do-search mh-pick-do-search mh-search-folder)
! ;;;;;; "mh-pick" "mh-pick.el" (17048 47905))
;;; Generated autoloads from mh-pick.el
(autoload (quote mh-search-folder) "mh-pick" "\
Search FOLDER for messages matching a pattern.
!
! With this command, you can search a folder for messages to or from a
! particular person or about a particular subject. In fact, you can also search
! for messages containing selected strings in any arbitrary header field or any
! string found within the messages.
!
! You are first prompted for the name of the folder to search and then placed in
! the following buffer in MH-Pick mode:
!
! From:
! To:
! Cc:
! Date:
! Subject:
! --------
!
! Edit this template by entering your search criteria in an appropriate header
! field that is already there, or create a new field yourself. If the string
! you're looking for could be anywhere in a message, then place the string
! underneath the row of dashes. The \\[mh-search-folder] command uses the MH
! command \"pick\" to do the real work.
!
! There are no semantics associated with the search criteria--they are simply
! treated as strings. Case is ignored when all lowercase is used, and regular
! expressions (a la \"ed\") are available. It is all right to specify several
! search criteria. What happens then is that a logical _and_ of the various
! fields is performed. If you prefer a logical _or_ operation, run
! \\[mh-search-folder] multiple times.
!
! As an example, let's say that we want to find messages from Ginnean about
! horseback riding in the Kosciusko National Park (Australia) during January,
! 1994. Normally we would start with a broad search and narrow it down if
! necessary to produce a manageable amount of data, but we'll cut to the chase
! and create a fairly restrictive set of criteria as follows:
!
! From: ginnean
! To:
! Cc:
! Date: Jan 1994
! Subject: horse.*kosciusko
! --------
!
! As with MH-Letter mode, MH-Pick provides commands like
! \\<mh-pick-mode-map>\\[mh-to-field] to help you fill in the blanks.
!
! To perform the search, type \\[mh-do-search]. The selected messages are placed
! in the \"search\" sequence, which you can use later in forwarding, printing,
! or narrowing your field of view. Subsequent searches are appended to the
! \"search\" sequence. If, however, you wish to start with a clean slate, first
! delete the \"search\" sequence.
!
! If you're searching in a folder that is already displayed in an MH-Folder
! buffer, only those messages contained in the buffer are used for the search.
! Therefore, if you want to search in all messages, first kill the folder's
! buffer with \\<mh-folder-mode-map>\\[kill-buffer] or scan the entire folder
! with \\[mh-rescan-folder].
!
! If you find that you do the same thing over and over when editing the search
! template, you may wish to bind some shortcuts to keys. This can be done with
! the variable `mh-pick-mode-hook', which is called when \\[mh-search-folder] is
! run on a new pattern.
!
! If you have run the \\[mh-index-search] command, but change your mind while
! entering the search criteria and actually want to run a regular search, then
! you can use the \\<mh-pick-mode-map>\\[mh-pick-do-search] command.
!
! In a program, argument WINDOW-CONFIG is the current window configuration and
! is used when the search folder is dismissed." t nil)
(autoload (quote mh-pick-do-search) "mh-pick" "\
Find messages that match the qualifications in the current pattern buffer.
***************
*** 882,888 ****
;;;### (autoloads (mh-print-msg mh-ps-print-toggle-mime
mh-ps-print-toggle-color
;;;;;; mh-ps-print-toggle-faces mh-ps-print-msg-show mh-ps-print-msg-file
! ;;;;;; mh-ps-print-msg) "mh-print" "mh-print.el" (16680 11171))
;;; Generated autoloads from mh-print.el
(autoload (quote mh-ps-print-msg) "mh-print" "\
--- 977,983 ----
;;;### (autoloads (mh-print-msg mh-ps-print-toggle-mime
mh-ps-print-toggle-color
;;;;;; mh-ps-print-toggle-faces mh-ps-print-msg-show mh-ps-print-msg-file
! ;;;;;; mh-ps-print-msg) "mh-print" "mh-print.el" (17044 64253))
;;; Generated autoloads from mh-print.el
(autoload (quote mh-ps-print-msg) "mh-print" "\
***************
*** 935,941 ****
;;;;;; mh-rename-seq mh-translate-range mh-read-range mh-read-seq-default
;;;;;; mh-notate-deleted-and-refiled mh-widen mh-put-msg-in-seq
;;;;;; mh-narrow-to-seq mh-msg-is-in-seq mh-list-sequences mh-delete-seq)
! ;;;;;; "mh-seq" "mh-seq.el" (16671 65286))
;;; Generated autoloads from mh-seq.el
(autoload (quote mh-delete-seq) "mh-seq" "\
--- 1030,1036 ----
;;;;;; mh-rename-seq mh-translate-range mh-read-range mh-read-seq-default
;;;;;; mh-notate-deleted-and-refiled mh-widen mh-put-msg-in-seq
;;;;;; mh-narrow-to-seq mh-msg-is-in-seq mh-list-sequences mh-delete-seq)
! ;;;;;; "mh-seq" "mh-seq.el" (17048 47921))
;;; Generated autoloads from mh-seq.el
(autoload (quote mh-delete-seq) "mh-seq" "\
***************
*** 1157,1163 ****
;;;### (autoloads (mh-speed-add-folder mh-speed-invalidate-map mh-speed-flists
;;;;;; mh-speed-view mh-speed-toggle mh-folder-speedbar-buttons)
! ;;;;;; "mh-speed" "mh-speed.el" (16665 53793))
;;; Generated autoloads from mh-speed.el
(autoload (quote mh-folder-speedbar-buttons) "mh-speed" "\
--- 1252,1258 ----
;;;### (autoloads (mh-speed-add-folder mh-speed-invalidate-map mh-speed-flists
;;;;;; mh-speed-view mh-speed-toggle mh-folder-speedbar-buttons)
! ;;;;;; "mh-speed" "mh-speed.el" (17044 64253))
;;; Generated autoloads from mh-speed.el
(autoload (quote mh-folder-speedbar-buttons) "mh-speed" "\
***************
*** 1196,1202 ****
;;;;;; mh-alias-grab-from-field mh-alias-add-alias mh-alias-for-from-p
;;;;;; mh-alias-address-to-alias mh-alias-letter-expand-alias
mh-alias-minibuffer-confirm-address
;;;;;; mh-read-address mh-alias-reload-maybe mh-alias-reload) "mh-alias"
! ;;;;;; "mh-alias.el" (16671 49382))
;;; Generated autoloads from mh-alias.el
(autoload (quote mh-alias-reload) "mh-alias" "\
--- 1291,1297 ----
;;;;;; mh-alias-grab-from-field mh-alias-add-alias mh-alias-for-from-p
;;;;;; mh-alias-address-to-alias mh-alias-letter-expand-alias
mh-alias-minibuffer-confirm-address
;;;;;; mh-read-address mh-alias-reload-maybe mh-alias-reload) "mh-alias"
! ;;;;;; "mh-alias.el" (17048 47789))
;;; Generated autoloads from mh-alias.el
(autoload (quote mh-alias-reload) "mh-alias" "\