[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] /srv/bzr/emacs/trunk r102463: ns_appbindir must end in /.
|
From: |
Jan D. |
|
Subject: |
[Emacs-diffs] /srv/bzr/emacs/trunk r102463: ns_appbindir must end in /. |
|
Date: |
Sun, 21 Nov 2010 15:39:55 +0100 |
|
User-agent: |
Bazaar (2.0.3) |
------------------------------------------------------------
revno: 102463
committer: Jan D. <address@hidden>
branch nick: trunk
timestamp: Sun 2010-11-21 15:39:55 +0100
message:
ns_appbindir must end in /.
modified:
configure
configure.in
=== modified file 'configure'
--- a/configure 2010-11-18 03:54:14 +0000
+++ b/configure 2010-11-21 14:39:55 +0000
@@ -1,11 +1,11 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.67 for emacs 24.0.50.
+# Generated by GNU Autoconf 2.65 for emacs 24.0.50.
#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
#
#
# This configure script is free software; the Free Software Foundation
@@ -316,7 +316,7 @@
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
} # as_fn_mkdir_p
@@ -356,19 +356,19 @@
fi # as_fn_arith
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
+# script with status $?, using 1 if that was 0.
as_fn_error ()
{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
fi
- $as_echo "$as_me: error: $2" >&2
+ $as_echo "$as_me: error: $1" >&2
as_fn_exit $as_status
} # as_fn_error
@@ -530,7 +530,7 @@
exec 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
@@ -912,9 +912,8 @@
fi
case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
@@ -959,7 +958,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -985,7 +984,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1189,7 +1188,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1205,7 +1204,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1235,8 +1234,8 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
;;
*=*)
@@ -1244,7 +1243,7 @@
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1262,13 +1261,13 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
+ as_fn_error "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options:
$ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1291,7 +1290,7 @@
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1305,8 +1304,8 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't
use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't
use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1321,9 +1320,9 @@
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
+ as_fn_error "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
+ as_fn_error "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1362,11 +1361,11 @@
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1406,7 +1405,7 @@
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
+ -q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
@@ -1625,9 +1624,9 @@
if $ac_init_version; then
cat <<\_ACEOF
emacs configure 24.0.50
-generated by GNU Autoconf 2.67
+generated by GNU Autoconf 2.65
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1743,7 +1742,7 @@
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
+ test $ac_status = 0; } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then :
@@ -1767,10 +1766,10 @@
ac_fn_c_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval "test \"\${$3+set}\"" = set; then :
+ if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
@@ -1806,7 +1805,7 @@
else
ac_header_preproc=no
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }
@@ -1833,7 +1832,7 @@
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
eval "$3=\$ac_header_compiler"
@@ -1897,7 +1896,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1919,18 +1918,15 @@
} # ac_fn_c_check_header_compile
-# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
-# ---------------------------------------------
-# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
-# accordingly.
+# ac_fn_c_check_decl LINENO SYMBOL VAR
+# ------------------------------------
+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
ac_fn_c_check_decl ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- as_decl_name=`echo $2|sed 's/ *(.*//'`
- as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is
declared" >&5
-$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
+$as_echo_n "checking whether $2 is declared... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1939,12 +1935,8 @@
int
main ()
{
-#ifndef $as_decl_name
-#ifdef __cplusplus
- (void) $as_decl_use;
-#else
- (void) $as_decl_name;
-#endif
+#ifndef $2
+ (void) $2;
#endif
;
@@ -1973,7 +1965,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1985,7 +1977,7 @@
else
eval "$3=no"
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
@@ -2003,7 +1995,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
$as_echo_n "checking for $2.$3... " >&6; }
-if eval "test \"\${$4+set}\"" = set; then :
+if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2059,7 +2051,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2127,7 +2119,7 @@
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
eval "$3=no"
@@ -2176,7 +2168,7 @@
running configure, to aid debugging if configure makes a mistake.
It was created by emacs $as_me 24.0.50, which was
-generated by GNU Autoconf 2.67. Invocation command line was
+generated by GNU Autoconf 2.65. Invocation command line was
$ $0 $@
@@ -2286,9 +2278,11 @@
{
echo
- $as_echo "## ---------------- ##
+ cat <<\_ASBOX
+## ---------------- ##
## Cache variables. ##
-## ---------------- ##"
+## ---------------- ##
+_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
(
@@ -2322,9 +2316,11 @@
)
echo
- $as_echo "## ----------------- ##
+ cat <<\_ASBOX
+## ----------------- ##
## Output variables. ##
-## ----------------- ##"
+## ----------------- ##
+_ASBOX
echo
for ac_var in $ac_subst_vars
do
@@ -2337,9 +2333,11 @@
echo
if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
+ cat <<\_ASBOX
+## ------------------- ##
## File substitutions. ##
-## ------------------- ##"
+## ------------------- ##
+_ASBOX
echo
for ac_var in $ac_subst_files
do
@@ -2353,9 +2351,11 @@
fi
if test -s confdefs.h; then
- $as_echo "## ----------- ##
+ cat <<\_ASBOX
+## ----------- ##
## confdefs.h. ##
-## ----------- ##"
+## ----------- ##
+_ASBOX
echo
cat confdefs.h
echo
@@ -2410,12 +2410,7 @@
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
+ ac_site_file1=$CONFIG_SITE
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
@@ -2430,11 +2425,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script
$ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5 ; }
+ . "$ac_site_file"
fi
done
@@ -2515,7 +2506,7 @@
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment
can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build"
>&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start
over" "$LINENO" 5
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over"
"$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
@@ -2689,7 +2680,7 @@
g | gt | gtk ) val=gtk ;;
gtk3 ) val=gtk3 ;;
* )
-as_fn_error $? "\`--with-x-toolkit=$withval' is invalid;
+as_fn_error "\`--with-x-toolkit=$withval' is invalid;
this option's value should be \`yes', \`no', \`lucid', \`athena', \`motif',
\`gtk' or
\`gtk3'. \`yes' and \`gtk' are synonyms. \`athena' and \`lucid' are
synonyms." "$LINENO" 5
;;
@@ -2992,7 +2983,7 @@
stringfreelist) ac_gc_check_string_free_list=1 ;;
xmallocoverrun) ac_xmalloc_overrun=1 ;;
conslist) ac_gc_check_cons_list=1 ;;
- *) as_fn_error $? "unknown check category $check" "$LINENO" 5 ;;
+ *) as_fn_error "unknown check category $check" "$LINENO" 5 ;;
esac
done
IFS="$ac_save_IFS"
@@ -3107,22 +3098,16 @@
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
done
if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\"
\"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\"
\"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
@@ -3136,7 +3121,7 @@
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
@@ -3147,16 +3132,16 @@
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed"
"$LINENO" 5
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO"
5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -3181,7 +3166,7 @@
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed"
"$LINENO" 5
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi
fi
@@ -3189,7 +3174,7 @@
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
@@ -3483,7 +3468,7 @@
if test $unported = yes; then
- as_fn_error $? "Emacs hasn't been ported to \`${canonical}' systems.
+ as_fn_error "Emacs hasn't been ported to \`${canonical}' systems.
Check \`etc/MACHINES' for recognized configuration names." "$LINENO" 5
fi
@@ -3797,8 +3782,8 @@
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in
\`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5 ; }
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3912,8 +3897,9 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5 ; }
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
@@ -3955,8 +3941,8 @@
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5 ; }
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -4013,9 +3999,9 @@
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
+as_fn_error "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details." "$LINENO" 5; }
fi
fi
fi
@@ -4066,8 +4052,8 @@
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5 ; }
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
@@ -4399,7 +4385,7 @@
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
@@ -4415,11 +4401,11 @@
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
break
fi
@@ -4458,7 +4444,7 @@
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
@@ -4474,18 +4460,18 @@
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5 ; }
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
fi
ac_ext=c
@@ -4546,7 +4532,7 @@
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error "no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
@@ -4612,7 +4598,7 @@
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error "no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
@@ -4744,7 +4730,8 @@
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header"
"$ac_includes_default
"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -4988,7 +4975,7 @@
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
@@ -5004,11 +4991,11 @@
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
break
fi
@@ -5047,7 +5034,7 @@
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
@@ -5063,18 +5050,18 @@
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5 ; }
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
fi
ac_ext=c
@@ -5511,7 +5498,7 @@
if test "x${with_makeinfo}" = "xno"; then
MAKEINFO=off
elif test ! -e $srcdir/info/emacs; then
- as_fn_error $? "You do not seem to have makeinfo >= 4.6, and your
+ as_fn_error "You do not seem to have makeinfo >= 4.6, and your
source tree does not seem to have pre-built manuals in the \`info' directory.
Either install a suitable version of makeinfo, or re-run configure
with the \`--without-makeinfo' option to build without the manuals. "
"$LINENO" 5
@@ -5670,7 +5657,7 @@
if test "x$GCC" = "xyes"; then
C_SWITCH_MACHINE="-fno-common"
else
- as_fn_error $? "What gives? Fix me if DEC Unix supports ELF now."
"$LINENO" 5
+ as_fn_error "What gives? Fix me if DEC Unix supports ELF now."
"$LINENO" 5
fi
else
UNEXEC_OBJ=unexalpha.o
@@ -5948,7 +5935,7 @@
## Some platforms don't use any of these files, so it is not
## appropriate to put this test outside the if block.
test -e $CRT_DIR/crtn.o || test -e $CRT_DIR/crt0.o || \
- as_fn_error $? "crt*.o not found in specified location." "$LINENO" 5
+ as_fn_error "crt*.o not found in specified location." "$LINENO" 5
fi
@@ -6003,7 +5990,8 @@
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header"
"$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -6194,7 +6182,7 @@
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
if test "$emacs_alsa_subdir" != yes; then
- as_fn_error $? "pkg-config found alsa, but it does not compile. See
config.log for error messages." "$LINENO" 5
+ as_fn_error "pkg-config found alsa, but it does not compile. See
config.log for error messages." "$LINENO" 5
fi
ALSA_CFLAGS="$ALSA_CFLAGS -DALSA_SUBDIR_INCLUDE"
fi
@@ -6229,7 +6217,8 @@
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header"
"$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -7284,8 +7273,8 @@
;; #(
*)
- as_fn_error $? "unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
esac
@@ -7293,7 +7282,7 @@
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" =
set"; }; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -7301,7 +7290,7 @@
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -7437,7 +7426,7 @@
have_x=disabled
else
case $x_includes,$x_libraries in #(
- *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO"
5 ;; #(
+ *\'*) as_fn_error "cannot use X directory names containing '" "$LINENO"
5;; #(
*,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then :
$as_echo_n "(cached) " >&6
else
@@ -7455,7 +7444,7 @@
@echo libdir='${LIBDIR}'
_ACEOF
if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile;
then
- # GNU make sometimes prints "make[1]: Entering ...", which would confuse
us.
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
for ac_var in incroot usrlibdir libdir; do
eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n
's/^$ac_var=//p'\`"
done
@@ -7541,7 +7530,7 @@
fi
done
fi
-rm -f conftest.err conftest.i conftest.$ac_ext
+rm -f conftest.err conftest.$ac_ext
fi # $ac_x_includes = no
if test "$ac_x_libraries" = no; then
@@ -7702,7 +7691,7 @@
elif test -f $GNUSTEP_CONFIG_FILE; then
NS_IMPL_GNUSTEP=yes
ns_appdir=`pwd`/nextstep/Emacs.app
- ns_appbindir=${ns_appdir}
+ ns_appbindir=${ns_appdir}/
ns_appresdir=${ns_appdir}/Resources
ns_appsrc=${srcdir}/nextstep/GNUstep/Emacs.base
GNUSTEP_SYSTEM_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo
$GNUSTEP_SYSTEM_HEADERS)"
@@ -7724,7 +7713,7 @@
if test "x$ac_cv_header_AppKit_AppKit_h" = x""yes; then :
HAVE_NS=yes
else
- as_fn_error $? "\`--with-ns' was specified, but the include
+ as_fn_error "\`--with-ns' was specified, but the include
files are missing or cannot be compiled." "$LINENO" 5
fi
@@ -7840,7 +7829,7 @@
if test "$HAVE_XSERVER" = true ||
test -n "$DISPLAY" ||
test "`echo /usr/lib/libX11.*`" != "/usr/lib/libX11.*"; then
- as_fn_error $? "You seem to be running X, but no X development
libraries
+ as_fn_error "You seem to be running X, but no X development libraries
were found. You should install the relevant development files for X
and for the toolkit you want, such as Gtk+, Lesstif or Motif. Also make
sure you have development files for image handling, i.e.
@@ -7963,7 +7952,8 @@
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header"
"$ac_includes_default
"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -8069,7 +8059,6 @@
main ()
{
char *data, *data2, *data3;
- const char *cdata2;
int i, pagesize;
int fd, fd2;
@@ -8094,10 +8083,10 @@
fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600);
if (fd2 < 0)
return 4;
- cdata2 = "";
- if (write (fd2, cdata2, 1) != 1)
+ data2 = "";
+ if (write (fd2, data2, 1) != 1)
return 5;
- data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2,
0L);
+ data2 = mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L);
if (data2 == MAP_FAILED)
return 6;
for (i = 0; i < pagesize; ++i)
@@ -8470,7 +8459,8 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -8872,7 +8862,7 @@
fi
if test "$pkg_check_gtk" = "no" && test "$USE_X_TOOLKIT" != "maybe"; then
- as_fn_error $? "$GTK_PKG_ERRORS" "$LINENO" 5
+ as_fn_error "$GTK_PKG_ERRORS" "$LINENO" 5
fi
fi
@@ -8978,7 +8968,7 @@
fi
if test "$pkg_check_gtk" = "no" && test "$USE_X_TOOLKIT" != "maybe"; then
- as_fn_error $? "$GTK_PKG_ERRORS" "$LINENO" 5
+ as_fn_error "$GTK_PKG_ERRORS" "$LINENO" 5
fi
fi
fi
@@ -9005,7 +8995,7 @@
if test "${GTK_COMPILES}" != "yes"; then
if test "$USE_X_TOOLKIT" != "maybe"; then
- as_fn_error $? "Gtk+ wanted, but it does not compile, see config.log.
Maybe some x11-devel files missing?" "$LINENO" 5 ;
+ as_fn_error "Gtk+ wanted, but it does not compile, see config.log.
Maybe some x11-devel files missing?" "$LINENO" 5;
fi
else
HAVE_GTK=yes
@@ -9135,7 +9125,8 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -9616,7 +9607,7 @@
USE_X_TOOLKIT=LUCID
LUCID_LIBW=-lXaw
elif test x"${USE_X_TOOLKIT}" = xLUCID; then
- as_fn_error $? "Lucid toolkit requires X11/Xaw include files" "$LINENO" 5
+ as_fn_error "Lucid toolkit requires X11/Xaw include files" "$LINENO" 5
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no; do not use toolkit
by default" >&5
$as_echo "no; do not use toolkit by default" >&6; }
@@ -10793,7 +10784,8 @@
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header"
"$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
@@ -11045,7 +11037,7 @@
MISSING="$MISSING libtiff" && WITH_NO="$WITH_NO --with-tiff=no"
if test "X${MISSING}" != X; then
- as_fn_error $? "The following required libraries were not found:
+ as_fn_error "The following required libraries were not found:
$MISSING
Maybe some development libraries/packages are missing?
If you don't want to link with them give
@@ -11534,7 +11526,8 @@
for ac_func in _getb67 GETB67 getb67; do
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define CRAY_STACKSEG_END $ac_func
@@ -11598,7 +11591,7 @@
if test x"$ac_cv_func_alloca_works" != xyes; then
- as_fn_error $? "a system implementation of alloca is required " "$LINENO" 5
+ as_fn_error "a system implementation of alloca is required " "$LINENO" 5
fi
# fmod, logb, and frexp are found in -lm on most systems.
@@ -11794,7 +11787,7 @@
if test $ac_cv_prog_liblockfile = yes; then
- as_fn_error $? "Shared liblockfile found but can't link against it.
+ as_fn_error "Shared liblockfile found but can't link against it.
This probably means that movemail could lose mail.
There may be a \`development' package to install containing liblockfile."
"$LINENO" 5
fi
@@ -11883,7 +11876,8 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -11914,7 +11908,8 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -11966,8 +11961,8 @@
static time_t time_t_min;
/* Values we'll use to set the TZ environment variable. */
-static const char *tz_strings[] = {
- (const char *) 0, "TZ=GMT0", "TZ=JST-9",
+static char *tz_strings[] = {
+ (char *) 0, "TZ=GMT0", "TZ=JST-9",
"TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
};
#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
@@ -11984,7 +11979,7 @@
instead of "TZ=America/Vancouver" in order to detect the bug even
on systems that don't support the Olson extension, or don't have the
full zoneinfo tables installed. */
- putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
+ putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
tm.tm_year = 98;
tm.tm_mon = 3;
@@ -11997,14 +11992,16 @@
}
static int
-mktime_test1 (time_t now)
+mktime_test1 (now)
+ time_t now;
{
struct tm *lt;
return ! (lt = localtime (&now)) || mktime (lt) == now;
}
static int
-mktime_test (time_t now)
+mktime_test (now)
+ time_t now;
{
return (mktime_test1 (now)
&& mktime_test1 ((time_t) (time_t_max - now))
@@ -12028,7 +12025,8 @@
}
static int
-bigtime_test (int j)
+bigtime_test (j)
+ int j;
{
struct tm tm;
time_t now;
@@ -12072,7 +12070,7 @@
instead of "TZ=America/Vancouver" in order to detect the bug even
on systems that don't support the Olson extension, or don't have the
full zoneinfo tables installed. */
- putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0");
+ putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
t = mktime (&tm);
@@ -12107,7 +12105,7 @@
for (i = 0; i < N_STRINGS; i++)
{
if (tz_strings[i])
- putenv ((char*) tz_strings[i]);
+ putenv (tz_strings[i]);
for (t = 0; t <= time_t_max - delta; t += delta)
if (! mktime_test (t))
@@ -12159,7 +12157,7 @@
# Make sure getloadavg.c is where it belongs, at configure-time.
test -f "$srcdir/$ac_config_libobj_dir/getloadavg.c" ||
- as_fn_error $? "$srcdir/$ac_config_libobj_dir/getloadavg.c is missing"
"$LINENO" 5
+ as_fn_error "$srcdir/$ac_config_libobj_dir/getloadavg.c is missing"
"$LINENO" 5
ac_save_LIBS=$LIBS
@@ -13028,7 +13026,7 @@
fi
if test "$have_tputs_et_al" != true; then
- as_fn_error $? "I couldn't find termcap functions (tputs and friends).
+ as_fn_error "I couldn't find termcap functions (tputs and friends).
Maybe some development libraries/packages are missing? Try installing
libncurses-dev(el), libterminfo-dev(el) or similar." "$LINENO" 5
fi
@@ -14167,7 +14165,8 @@
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
@@ -14541,14 +14540,14 @@
&& test x"`$CC --version 2> /dev/null | grep 'gcc.* 4.5.0'`" != x \
&& test x"`echo $CFLAGS | grep '\-O[23]'`" != x \
&& test x"`echo $CFLAGS | grep '\-fno-optimize-sibling-calls'`" = x; then
- as_fn_error $? "GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'."
"$LINENO" 5
+ as_fn_error "GCC 4.5.0 has problems compiling Emacs; see etc/PROBLEMS'."
"$LINENO" 5
fi
#### Find out which version of Emacs this is.
version=`grep 'const char emacs_version' ${srcdir}/src/emacs.c \
| sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
if test x"${version}" = x; then
- as_fn_error $? "can't find current emacs version in
\`${srcdir}/src/emacs.c'." "$LINENO" 5
+ as_fn_error "can't find current emacs version in \`${srcdir}/src/emacs.c'."
"$LINENO" 5
fi
if test x"${version}" != x"$PACKAGE_VERSION"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: version mismatch between
\`${srcdir}/configure.in' and \`${srcdir}/src/emacs.c'." >&5
@@ -15104,7 +15103,6 @@
ac_libobjs=
ac_ltlibobjs=
-U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -15267,19 +15265,19 @@
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
+# script with status $?, using 1 if that was 0.
as_fn_error ()
{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
fi
- $as_echo "$as_me: error: $2" >&2
+ $as_echo "$as_me: error: $1" >&2
as_fn_exit $as_status
} # as_fn_error
@@ -15475,7 +15473,7 @@
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
} # as_fn_mkdir_p
@@ -15529,7 +15527,7 @@
# values after options handling.
ac_log="
This file was extended by emacs $as_me 24.0.50, which was
-generated by GNU Autoconf 2.67. Invocation command line was
+generated by GNU Autoconf 2.65. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -15595,10 +15593,10 @@
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
emacs config.status 24.0.50
-configured by $0, generated by GNU Autoconf 2.67,
+configured by $0, generated by GNU Autoconf 2.65,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -15614,16 +15612,11 @@
while test $# != 0
do
case $1 in
- --*=?*)
+ --*=*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
*)
ac_option=$1
ac_optarg=$2
@@ -15645,7 +15638,6 @@
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
@@ -15658,7 +15650,7 @@
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
- as_fn_error $? "ambiguous option: \`$1'
+ as_fn_error "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
@@ -15667,7 +15659,7 @@
ac_cs_silent=: ;;
# This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
+ -*) as_fn_error "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
@@ -15735,7 +15727,7 @@
"leim/Makefile") CONFIG_FILES="$CONFIG_FILES leim/Makefile" ;;
"default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -15773,7 +15765,7 @@
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -15807,7 +15799,7 @@
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
+ ac_cs_awk_cr='\r'
else
ac_cs_awk_cr=$ac_cr
fi
@@ -15824,7 +15816,7 @@
echo "_ACEOF"
} >conf$$files.sh &&
. ./conf$$files.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
rm -f conf$$files.sh
{
@@ -15832,18 +15824,18 @@
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -15938,28 +15930,20 @@
else
cat
fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
_ACEOF
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:address@hidden@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
s/^[^=]*=[ ]*$//
}'
fi
@@ -15987,7 +15971,7 @@
if test -z "$ac_t"; then
break
elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -16072,7 +16056,7 @@
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+ as_fn_error "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
@@ -16085,7 +16069,7 @@
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -16113,7 +16097,7 @@
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;;
esac
as_fn_append ac_file_inputs " '$ac_f'"
@@ -16140,7 +16124,7 @@
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -16276,22 +16260,22 @@
else
$AWK -f "$tmp/subs.awk" | $SHELL
fi >$tmp/out \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z
"$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a
reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
+which seems to be undefined. Please make sure it is defined." >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
+which seems to be undefined. Please make sure it is defined." >&2;}
rm -f "$tmp/stdin"
case $ac_file in
-) cat "$tmp/out" && rm -f "$tmp/out";;
*) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
;;
:H)
#
@@ -16302,19 +16286,19 @@
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
} >"$tmp/config.h" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
mv "$tmp/config.h" "$ac_file" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
&& eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error $? "could not create -" "$LINENO" 5
+ || as_fn_error "could not create -" "$LINENO" 5
fi
;;
@@ -16351,7 +16335,7 @@
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -16372,7 +16356,7 @@
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
+ $ac_cs_success || as_fn_exit $?
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no;
then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
=== modified file 'configure.in'
--- a/configure.in 2010-11-21 05:17:19 +0000
+++ b/configure.in 2010-11-21 14:39:55 +0000
@@ -1498,7 +1498,7 @@
elif test -f $GNUSTEP_CONFIG_FILE; then
NS_IMPL_GNUSTEP=yes
ns_appdir=`pwd`/nextstep/Emacs.app
- ns_appbindir=${ns_appdir}
+ ns_appbindir=${ns_appdir}/
ns_appresdir=${ns_appdir}/Resources
ns_appsrc=${srcdir}/nextstep/GNUstep/Emacs.base
dnl FIXME sourcing this several times in subshells seems inefficient.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Emacs-diffs] /srv/bzr/emacs/trunk r102463: ns_appbindir must end in /.,
Jan D. <=