[Emacs-diffs] /srv/bzr/emacs/trunk r107390: Read msdog.texi

[Glenn Morris]

------------------------------------------------------------
revno: 107390
committer: Glenn Morris <address@hidden>
branch nick: trunk
timestamp: Wed 2012-02-22 21:36:08 -0800
message:
  Read msdog.texi
  
  * doc/emacs/msdog.texi (Text and Binary, ls in Lisp, Windows HOME)
  (Windows Keyboard, Windows Mouse, Windows Processes)
  (Windows Printing, Windows Misc): Copyedits.
  (ls in Lisp): Update switches list.
  * admin/FOR-RELEASE: Related markup.
modified:
  admin/FOR-RELEASE
  doc/emacs/ChangeLog
  doc/emacs/msdog.texi

=== modified file 'admin/FOR-RELEASE'
--- a/admin/FOR-RELEASE 2012-02-23 04:32:18 +0000
+++ b/admin/FOR-RELEASE 2012-02-23 05:36:08 +0000
@@ -154,7 +154,12 @@
 mini.texi         
 misc.texi         cyd
 modes.texi        cyd
-msdog.texi        
+msdog.texi        rgm  (can't actually test any of it though)
+  It was not obvious to me that the following is true (it could well be 
though):
+
+   Emacs on Windows automatically determines your default printer and
+   sets the variable `printer-name' to that printer's name.
+
 msdog-xtra.texi   rgm  (can't actually test any of it though)
 mule.texi         
 m-x.texi          cyd

=== modified file 'doc/emacs/ChangeLog'
--- a/doc/emacs/ChangeLog       2012-02-23 04:32:18 +0000
+++ b/doc/emacs/ChangeLog       2012-02-23 05:36:08 +0000
@@ -1,5 +1,10 @@
 2012-02-23  Glenn Morris  <address@hidden>
 
+       * msdog.texi (Text and Binary, ls in Lisp, Windows HOME)
+       (Windows Keyboard, Windows Mouse, Windows Processes)
+       (Windows Printing, Windows Misc): Copyedits.
+       (ls in Lisp): Update switches list.
+
        * msdog-xtra.texi (MS-DOS Display): Update list-colors-display xref.
        Update dos-mode* function names.
        (MS-DOS Printing, MS-DOS and MULE): Copyedits.

=== modified file 'doc/emacs/msdog.texi'
--- a/doc/emacs/msdog.texi      2012-02-20 23:50:52 +0000
+++ b/doc/emacs/msdog.texi      2012-02-23 05:36:08 +0000
@@ -159,7 +159,8 @@
 command.  For example, to save a buffer with Unix EOL format, type
 @kbd{C-x @key{RET} f unix @key{RET} C-x C-s}.  If you visit a file
 with DOS EOL conversion, then save it with Unix EOL format, that
-effectively converts the file to Unix EOL style, like @code{dos2unix}.
+effectively converts the file to Unix EOL style, like the
address@hidden program.
 
 @cindex untranslated file system
 @findex add-untranslated-filesystem
@@ -221,7 +222,7 @@
 carriage-return linefeed EOL format, such as @file{CONFIG.SYS}; Emacs
 always writes those files with Windows-style EOLs.
 
-  If a file which belongs to an untranslated file system matches one of
+  If a file that belongs to an untranslated file system matches one of
 the file-name patterns in @code{file-name-buffer-file-type-alist}, the
 EOL conversion is determined by @code{file-name-buffer-file-type-alist}.
 
@@ -263,8 +264,8 @@
 @cindex Dired, and MS-Windows/MS-DOS
 @cindex @code{ls} emulation
 
-  Dired normally uses the external program @code{ls} (or its close
-work-alike) to produce the directory listing displayed in Dired
+  Dired normally uses the external program @code{ls}
+to produce the directory listing displayed in Dired
 buffers (@pxref{Dired}).  However, MS-Windows and MS-DOS systems don't
 come with such a program, although several ports of @sc{gnu} @code{ls}
 are available.  Therefore, Emacs on those systems @emph{emulates}
@@ -281,8 +282,8 @@
   The @code{ls} emulation supports many of the @code{ls} switches, but
 it doesn't support all of them.  Here's the list of the switches it
 does support: @option{-A}, @option{-a}, @option{-B}, @option{-C},
address@hidden, @option{-i}, @option{-G}, @option{-g}, @option{-R},
address@hidden, @option{-S}, @option{-s}, @option{-t}, @option{-U},
address@hidden, @option{-G}, @option{-g}, @option{-h}, @option{-i}, @option{-n},
address@hidden, @option{-r}, @option{-S}, @option{-s}, @option{-t}, @option{-U},
 @option{-u}, and @option{-X}.  The @option{-F} switch is partially
 supported (it appends the character that classifies the file, but does
 not prevent symlink following).
@@ -413,9 +414,9 @@
   You can override this default value of @code{HOME} by explicitly
 setting the environment variable @env{HOME} to point to any directory
 on your system.  @env{HOME} can be set either from the command shell
-prompt or from the @samp{My Computer}s @samp{Properties} dialog.
address@hidden can also be set in the system registry, for details see
address@hidden Registry}.
+prompt or from @samp{Properties} dialog of @samp{My Computer}.
address@hidden can also be set in the system registry,
address@hidden Registry}.
 
   For compatibility with older versions of address@hidden
 Older versions of Emacs didn't check the application data directory.
@@ -431,9 +432,9 @@
   Whatever the final place is, Emacs sets the internal value of the
 @env{HOME} environment variable to point to it, and it will use that
 location for other files and directories it normally looks for or
-creates in the user's home directory.
+creates in your home directory.
 
-  You can always find out where Emacs thinks is your home directory's
+  You can always find out what Emacs thinks is your home directory's
 location by typing @kbd{C-x d ~/ @key{RET}}.  This should present the
 list of files in the home directory, and show its full name on the
 first line.  Likewise, to visit your init file, type @kbd{C-x C-f
@@ -510,7 +511,7 @@
 @cindex @address@hidden vs @address@hidden (MS-Windows)
 @cindex @address@hidden vs @address@hidden (MS-Windows)
   For example, @code{(w32-register-hot-key [M-tab])} lets you use
address@hidden normally in Emacs, for instance, to complete the word or
address@hidden normally in Emacs; for instance, to complete the word or
 symbol at point at top level, or to complete the current search string
 against previously sought strings during incremental search.
 
@@ -589,7 +590,7 @@
 its normal effect: for example, @address@hidden opens the
 @code{Start} menu, address@hidden
 Some combinations of the ``Windows'' keys with other keys are caught
-by Windows at low level in a way that Emacs currently cannot prevent.
+by Windows at a low level in a way that Emacs currently cannot prevent.
 For example, @address@hidden r} always pops up the Windows
 @samp{Run} dialog.  Customizing the value of
 @code{w32-phantom-key-code} might help in some cases, though.}
@@ -612,7 +613,7 @@
 @cindex mouse, and MS-Windows
 
   This section describes the Windows-specific variables related to
-mouse.
+the mouse.
 
 @vindex w32-mouse-button-tolerance
 @cindex simulation of middle mouse button
@@ -689,8 +690,8 @@
 @vindex w32-quote-process-args
   The variable @code{w32-quote-process-args} controls how Emacs quotes
 the process arguments.  address@hidden means quote with the @code{"}
-character.  If the value is a character, use that character to escape
-any quote characters that appear; otherwise chose a suitable escape
+character.  If the value is a character, Emacs uses that character to escape
+any quote characters that appear; otherwise it chooses a suitable escape
 character based on the type of the program.
 
 @ifnottex
@@ -723,7 +724,7 @@
   If you want to use your local printer, then set the Lisp variable
 @code{lpr-command} to @code{""} (its default value on Windows) and
 @code{printer-name} to the name of the printer port---for example,
address@hidden"PRN"}, the usual local printer port or @code{"LPT2"}, or
address@hidden"PRN"}, the usual local printer port, or @code{"LPT2"}, or
 @code{"COM1"} for a serial printer.  You can also set
 @code{printer-name} to a file name, in which case ``printed'' output
 is actually appended to that file.  If you set @code{printer-name} to
@@ -738,7 +739,7 @@
 obtain a list of servers, and @samp{net view @var{server-name}} to see
 the names of printers (and directories) shared by that server.
 Alternatively, click the @samp{Network Neighborhood} icon on your
-desktop, and look for machines which share their printers via the
+desktop, and look for machines that share their printers via the
 network.
 
 @cindex @samp{net use}, and printing on MS-Windows
@@ -797,8 +798,8 @@
   Finally, if you do have an @code{lpr} work-alike, you can set the
 variable @code{lpr-command} to @code{"lpr"}.  Then Emacs will use
 @code{lpr} for printing, as on other systems.  (If the name of the
-program isn't @code{lpr}, set @code{lpr-command} to specify where to
-find it.)  The variable @code{lpr-switches} has its standard meaning
+program isn't @code{lpr}, set @code{lpr-command} to the appropriate value.)
+The variable @code{lpr-switches} has its standard meaning
 when @code{lpr-command} is not @code{""}.  If the variable
 @code{printer-name} has a string value, it is used as the value for the
 @code{-P} option to @code{lpr}, as on Unix.
@@ -822,7 +823,7 @@
 @cindex Ghostscript, use for PostScript printing
   The default value of the variable @code{ps-lpr-command} is @code{""},
 which causes PostScript output to be sent to the printer port specified
-by @code{ps-printer-name}, but @code{ps-lpr-command} can also be set to
+by @code{ps-printer-name}; but @code{ps-lpr-command} can also be set to
 the name of a program which will accept PostScript files.  Thus, if you
 have a non-PostScript printer, you can set this variable to the name of
 a PostScript interpreter program (such as Ghostscript).  Any switches
@@ -980,7 +981,7 @@
 determines whether to make the system caret visible.  The default when
 no screen reader software is in use is @code{nil}, which means Emacs
 draws its own cursor to indicate the position of point.  A
address@hidden value means Emacs will indicate point location by the
address@hidden value means Emacs will indicate point location with the
 system caret; this facilitates use of screen reader software, and is
 the default when such software is detected when running Emacs.
 When this variable is address@hidden, other variables affecting the